Contents

NetFlow Layer 2 and Security Monitoring Exports

The NetFlow Layer 2 and Security Monitoring Exports feature improves your ability to detect and analyze network threats such as denial of service (DoS) attacks by increasing the number of fields from which NetFlow can capture relevant data.

NetFlow is a Cisco IOS technology that provides statistics on packets flowing through a router. NetFlow is the standard for acquiring IP operational data from IP networks. NetFlow provides network and security monitoring, network planning, traffic analysis, and IP accounting.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Prerequisites for NetFlow Layer 2 and Security Monitoring Exports

  • Before you configure NetFlow Layer 2 and Security Monitoring Exports, you should understand NetFlow accounting and know how to configure your router to capture IP traffic accounting statistics using NetFlow. See the “Cisco IOS NetFlow Overview” and “Configuring NetFlow and NetFlow Data Export” modules for more details.

  • NetFlow and Cisco Express Forwarding (formerly known as CEF), distributed Cisco Express Forwarding (formerly known as dCEF), or fast switching must be configured on your system.

  • If you want to export the data captured with the NetFlow Layer 2 and Security Monitoring feature, you must configure NetFlow to use the NetFlow Version 9 data export format.

Information About NetFlow Layer 2 and Security Monitoring Exports

NetFlow Layer 2 and Security Monitoring

The Layer 2 and Layer 3 fields supported by the NetFlow Layer 2 and Security Monitoring Exports feature increase the amount of information that can be obtained by NetFlow about the traffic in your network. You can use the network traffic information for applications such as traffic engineering and usage-based billing.

Layer 3 fields captured by the NetFlow Layer 2 and Security Monitoring Exports feature improve the capabilities of NetFlow for identifying DoS attacks. Layer 2 IP header fields help identify the path that the DoS attack is taking through the network.

Layer 2 and Layer 3 fields are not key fields. They provide additional information about the traffic in an existing flow. Changes in the values of NetFlow key fields, such as the source IP address, from one packet to the next packet results in the creation of a new flow. For example, if the first packet captured by NetFlow has a source IP address of 10.34.0.2 and the second packet captured has a source IP address of 172.16.213.65, NetFlow will create two separate flows.

Most DoS attacks consist of an attacker sending the same type of IP datagram repeatedly, in an attempt to overwhelm target systems. In such cases, the incoming traffic often has similar characteristics, such as the same values in each datagram for one or more fields that the NetFlow Layer 2 and Security Monitoring Exports feature can capture.

The originator of DoS attacks cannot be easily identified because the IP source address of the device sending the traffic is usually forged. However, you can easily trace the traffic back through the network to the router on which it is arriving by using the NetFlow Layer 2 and Security Monitoring Exports feature to capture the MAC address and VLAN-ID fields. If the router on which traffic is arriving supports NetFlow, you can configure the NetFlow Layer 2 and Security Monitoring Exports feature on it to identify the interface on which the traffic is arriving. The figure below shows an example of an attack in progress.

Figure 1. DoS Attack Arriving over the Internet


Note


You can analyze the data captured by NetFlow directly from the router by using the show ip cache verbose flow command or by the Cisco Network Services (CNS) NetFlow Collector Engine.


Once you have concluded that a DoS attack is taking place by analyzing the Layer 3 fields in the NetFlow flows, you can analyze the Layer 2 fields in the flows to discover the path that the DoS attack is taking through the network.

An analysis of the data captured by the NetFlow Layer 2 and Security Monitoring Exports feature, for the scenario shown in the above figure, indicates that the DoS attack is arriving on Router C, because the upstream MAC address is from the interface that connects Router C to Switch A. It is also evident that there are no routers between the target host (the e-mail server) and the NetFlow router, because the destination MAC address of the DoS traffic that the NetFlow router is forwarding to the e-mail server is the MAC address of the e-mail server.

You can learn the MAC address that Host C is using to send traffic to Router C by configuring the NetFlow Layer 2 and Security Monitoring Exports feature on Router C. The source MAC address will be from Host C. The destination MAC address will be for the interface on the NetFlow router.

Once you know the MAC address that Host C is using and the interface on Router C on which Host C’s DoS attack is arriving, you can mitigate the attack by reconfiguring Router C to block Host C’s traffic. If Host C is on a dedicated interface, you can disable the interface. If Host C is using an interface that carries traffic from other users, you must configure your firewall to block Host C’s traffic, but still allow the traffic from the other users to flow through Router C.

Layer 2 Information Capture Using NetFlow Layer 2 and Security Monitoring Exports

The NetFlow Layer 2 and Security Monitoring Exports feature can capture the values of the MAC address and VLAN ID fields from flows. The two supported VLAN types are 802.1q and the Cisco Inter-Switch Link (ISL) protocol.

Layer 2 MAC Address Fields

The Layer 2 fields for which the NetFlow Layer 2 and Security Monitoring Exports feature captures the values are as follows:

  • The source MAC address field from frames that are received by the NetFlow router.

  • The destination MAC address field from frames that are transmitted by the NetFlow router.

  • The VLAN ID field from frames that are received by the NetFlow router.

  • The VLAN ID field from frames that are transmitted by the NetFlow router.

Figure 2 shows the Ethernet Type II and Ethernet 802.3 frame formats. The destination address field and the source address field in the frame formats are the MAC address values that are captured by NetFlow.

Figure 2. Ethernet Type II and 802.3 Frame Formats

Table 1 explains the fields for the Ethernet frame formats.

Table 1 Ethernet Type II and 802.3 Frame Fields

Field

Description

Preamble

The entry in the Preamble field is an alternating pattern of 0s and 1s that communicates to receiving stations about an incoming frame. It also provides a means for the receiving stations to synchronize their clocks with the incoming bit stream.

SOF (Start of frame)

The SOF field holds an alternating pattern of 0s and 1s, ending with two consecutive 1s, indicating that the next bit is the first bit of the first byte of the destination MAC address.

Destination Address

The 48-bit destination address identifies which station on the LAN should receive the frame. The first two bits of the destination MAC address are reserved for the following special functions:

  • The first bit in the destination address field indicates whether the address is an individual address (0) or a group address (1).

  • The second bit indicates whether the destination address is globally administered (0) or locally administered (1).

The remaining 46 bits form a uniquely assigned value that identifies a single station, a defined group of stations, or all stations on the network.

Source Address

The 48-bit source address identifies which station transmitted the frame. The source address is always an individual address, and the leftmost bit in the Source Address field is always 0.

Type

or

Length

Type—In an Ethernet Type II frame, a part of the frame is used for the Type field. The Type field is used to identify the next layer protocol in the frame.

Length—In an 802.3 Ethernet frame, a part of the frame is used for the Length field. The Length field is used to indicate the length of the Ethernet frame. The value can be from 46 to 1500 bytes.

Data

or

802.2 header and data

Ethernet Type II—46 to 1500 bytes of data

or

802.3/802.2—8 bytes of header and 38 to 1492 bytes of data.

FCS (Frame Check Sequence)

This field contains a 32-bit cyclic redundancy check (CRC) value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS is generated for the destination address, source address, Type, and Data fields of the frame. The FCS does not include the data portion of the frame.

Layer 2 VLAN ID Fields

NetFlow can capture the value in the VLAN ID field for 802.1q tagged VLANs and Cisco ISL encapsulated VLANs. This section describes the two types of VLANs, 802.1q and ISL.


Note


ISL and 802.1q are commonly called VLAN encapsulation protocols.


Understanding 802.1q VLANs

Devices that use 802.1q insert a four-byte tag into the original frame before it is transmitted. Figure 3 shows the format of an 802.1q tagged Ethernet frame.

Figure 3. 802.1q Tagged Ethernet Type II or 802.3 Frame

Table 2 describes the fields for 802.1q VLANs.

Table 2 802.1q VLAN Encapsulation Fields

Field

Description

Destination Address

The 48-bit destination address identifies which stations on the LAN should receive the frame. The first two bits of the destination MAC address are reserved for the following special functions:

  • The first bit in the destination address field indicates whether the address is an individual address (0) or a group address (1).

  • The second bit indicates whether the destination address is globally administered (0) or locally administered (1).

The remaining 46 bits form a uniquely assigned value that identifies a single station, a defined group of stations, or all stations on the network.

Source Address

The 48-bit source address identifies which station transmitted the frame. The source address is always an individual address, and the leftmost bit in the Source Address field is always 0.

Type

or

Length

Type—In an Ethernet Type II frame, a part of the frame is used for the Type field. The Type field is used to identify the next layer protocol in the frame.

Length—In an 802.3 Ethernet frame, a part of the frame is used for the Length field. The Length field is used to indicate the length of the Ethernet frame. The value can be from 46 to 1500 bytes.

Data

or

802.2 header and data

Ethernet Type II—46 to 1500 bytes of data

or

802.3/802.2—8 bytes of header and 38 to 1492 bytes of data.

FCS (Frame Check Sequence)

This field contains a 32-bit cyclic redundancy check (CRC) value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS is generated for the destination address, source address, Type, and Data fields of the frame. The FCS does not include the data portion of the frame.

Tag Protocol ID (TPID)

This 16-bit field is set to a value of 0x8100 to identify the frame as an IEEE 802.1q tagged frame.

Priority

This 3-bit field refers to the 802.1p priority. It is also known as user priority. It indicates the frame priority level used for prioritizing traffic and can represent levels 0–7.

Tag Control Information

This 2-byte Tag Control Information field consists of the following two subfields:

  • Canonical Format Indentifier (CFI)—If the value of this 1-bit field is 1, the MAC address is in noncanonical format. If the value of this field is 0, the MAC address is in canonical format.

  • VLAN ID—This 12-bit field uniquely identifies the VLAN to which the frame belongs. It can have a value from 0 to 4095.

Cisco ISL VLANs

ISL is a Cisco-proprietary protocol for encapsulating frames on a VLAN trunk. Devices that use ISL add an ISL header to the frame. This process is known as VLAN encapsulation. 802.1Q is the IEEE standard for tagging frames on a VLAN trunk. Figure 4 shows the format of a Cisco ISL-encapsulated Ethernet frame.

Figure 4. Cisco ISL Tagged Ethernet Frame

Table 3 describes the fields for 802.1q VLANs.

Table 3 ISL VLAN Encapsulation

Field

Description

DA (destination address)

This 40-bit field is a multicast address and is set at 0n01-00-0c-00-00 or 0n03-00-0c-00-00. The receiving host determines that the frame is encapsulated in ISL by reading the 40-bit DA field and matching it with one of the two ISL multicast addresses.

TYPE

This 4-bit field indicates the type of frame that is encapsulated and to indicate alternative encapsulations.

TYPE codes:

  • 0000—Ethernet

  • 0001—Token Ring

  • 0010—FDDI

  • 0011—ATM

USER

This 4-bit field is used to extend the meaning of the Frame TYPE field. The default USER field value is 0000. For Ethernet frames, the USER field bits 0 and 1 indicate the priority of the packet as it passes through the switch. Whenever traffic can be handled more quickly, the packets with this bit set should take advantage of the quicker path. However, such paths are not required.

USER codes:

  • xx00—Normal priority

  • xx01—Priority 1

  • xx10—Priority 2

  • xx11—Highest priority

SA

This 48-bit field is the source address field of the ISL packet. It should be set to the 802.3 MAC address of the switch port transmitting the frame. The receiving device can ignore the SA field of the frame.

LEN

This 16-bit value field stores the actual packet size of the original packet. The LEN field represents the length of the packet in bytes, excluding the DA, TYPE, USER, SA, LEN, and FCS fields. The total length of the excluded fields is 18 bytes, so the LEN field represents the total length minus 18 bytes.

AAAA03(SNAP)

The AAAA03 Subnetwork Access Protocol (SNAP) field is a 24-bit constant value of 0xAAAA03.

HSA

This 24-bit field represents the upper three bytes (the manufacturer’s ID portion) of the SA field. It must contain the value 0x00-00-0C.

VLAN

This 15-bit field is the virtual LAN ID of the packet. This value is used to mark frames on different VLANs.

BPDU

The bit in the bridge protocol data unit (BPDU) field is set for all BPDU packets that are encapsulated by the ISL frame. The BPDUs are used by the spanning tree algorithm to learn information about the topology of the network. This bit is also set for Cisco Discovery Protocol and VLAN Trunk Protocol (VTP) frames that are encapsulated.

INDEX

This 16-bit field indicates the port index of the source of the packet as it exits the switch. It is used for diagnostic purposes only, and may be set to any value by other devices. It is ignored in received packets.

RES

This 16-bit field is used when Token Ring or FDDI packets are encapsulated with an ISL frame.

Encapsulated FRAME

This field contains the encapsulated Layer 2 frame.

FCS

The FCS field consists of 4 bytes. It includes a 32-bit CRC value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS covers the DA, SA, Length/Type, and Data fields. When an ISL header is attached to a Layer 2 frame, a new FCS is calculated over the entire ISL packet and added to the end of the frame.

Note   

The addition of the new FCS does not alter the original FCS that is contained within the encapsulated frame.

Layer 3 Information Capture Using NetFlow Layer 2 and Security Monitoring Exports

The five fields that the NetFlow Layer 2 and Security Monitoring Exports feature captures from Layer 3 IP traffic in a flow are the following:

  • Internet Control Message Protocol (ICMP) type and code

  • ID field

  • Fragment offset

  • Packet length field

  • Time-to-live field

Figure 5 shows the fields in an IP packet header.

Figure 5. IP Packet Header Fields

Table 4 describes the header fields in Figure 5.

Table 4 IP Packet Header Fields

Field

Description

Version

The version of the IP protocol. If this field is set to 4, it is an IPv4 datagram. If this field is set to 6, it is an IPv6 datagram.

Note   

IPv4 and IPv6 headers have different structures.

IHL (Internet Header Length)

Internet Header Length is the length of the Internet header in 32-bit word format and thus points to the beginning of the data.

Note   

The minimum value for the correct header length is 5.

ToS

Type of service (ToS) provides an indication of the abstract parameters of the quality of service desired. These parameters are to be used to guide the selection of the actual service parameters when a networking device transmits a datagram through a particular network.

Total Length

Total length is the length of the datagram, measured in octets, including Internet header and data.

Identification (ID)

The value in the ID field is entered by the sender. All the fragments of an IP datagram have the same value in the ID field. Subsequent IP datagrams from the same sender will have different values in the ID field.

Frequently, a host receives fragmented IP datagrams from several senders concurrently. Also, frequently a host receives multiple IP datagrams from the same sender concurrently.

The value in the ID field is used by the destination host to ensure that the fragments of an IP datagram are assigned to the same packet buffer during the IP datagram reassembly process. The unique value in the ID field is used to prevent the receiving host from mixing together IP datagram fragments of different IP datagrams from the same sender during the IP datagram reassembly process.

Flags

A sequence of three bits is used to set and track IP datagram fragmentation parameters. The bits are:

  • 001—The IP datagram can be fragmented. More fragments of the current IP datagram are in transit.

  • 000—The IP datagram can be fragmented. This is the last fragment of the current IP datagram.

  • 010—The IP datagram cannot be fragmented. This is the entire IP datagram.

Fragment Offset

This field indicates where in the datagram this fragment belongs.

TTL (Time-to-Live)

This field indicates the maximum time the datagram is allowed to remain in the Internet system. If this field contains the value 0, then the datagram must be destroyed. This field is modified in Internet header processing. The TTL is measured in units of seconds, but because every module that processes a datagram must decrease the TTL by at least 1 even if it processes the datagram in less than a second, the TTL must be thought of only as an upper bound on the time a datagram can exist. The intention is to discard undeliverable datagrams and bound the maximum datagram lifetime.

Protocol

Indicates the type of transport packet included in the data portion of the IP datagram. Common values are:

  • 1—ICMP

  • 6—TCP

  • 17—UDP

Header checksum

A checksum on the header only. Because some header fields, such as the TTL field, change every time an IP datagram is forwarded, this value is recomputed and verified at each point that the Internet header is processed.

Source IP Address

IP address of the sending station.

Destination IP Address

IP address of the destination station.

Options and Padding

The options and padding may appear in datagrams. If they do appear, they must be implemented by all IP modules (host and gateways). Options and padding are always implemented in any particular datagram; transmissions are not.

Figure 6 shows the fields in an ICMP datagram.

Figure 6. ICMP Datagram

Table 5 interprets the packet format in the figure seen above. ICMP datagrams are carried in the data area of an IP datagram, after the IP header.

Table 5 ICMP Packet Format

Type

Name

Codes

0

Echo reply

0—None.

1

Unassigned

2

Unassigned

3

Destination unreachable

0—Network unreachable.

1—Host unreachable.

2—Protocol unreachable.

3—Port unreachable.

4—Fragmentation needed and don't fragment (DF) bit set.

5—Source route failed.

6—Destination network unknown.

7—Destination host unknown.

8—Source host isolated.

9—Communication with the destination network is administratively prohibited.

10—Communication with the destination host is administratively prohibited.

11—Destination network unreachable for ToS.

12—Destination host unreachable for ToS.

4

Source quench

0—None.

5

Redirect

0—None.

0—Redirect datagram for the network.

1—Redirect datagram for the host.

2—Redirect datagram for the ToS and network.

3—Redirect datagram for the ToS and host.

6

Alternate host address

0—Alternate address for the host.

7

Unassigned

8

Echo

0—None.

9

Router advertisement

0—None.

10

Router selection

0—None.

11

Time exceeded

0—Time to live exceeded in transit.

12

Parameter problem

0—Pointer indicates the error.

1—Missing a required option.

2—Inappropriate length.

13

Timestamp

0—None.

14

Timestamp reply

0—None.

15

Information request

0—None.

16

Information reply

0—None.

17

Address mask request

0—None.

18

Address mask reply

0—None.

19

Reserved (for security)

20–29

Reserved (for robustness experiment)

30

Trace route

31

Datagram conversion error

32

Mobile host redirect

33

IPv6 where-are-you

34

IPv6 I-am-here

35

Mobile registration request

36

Mobile registration reply

37–255

Reserved

NBAR Data Export

Network based application recognition (NBAR) is a classification engine that recognizes and classifies a wide variety of protocols and applications, including web-based and other difficult-to-classify applications and protocols that use dynamic TCP/UDP port assignments.

When NBAR recognizes and classifies a protocol or application, the network can be configured to apply the appropriate application mapping with that protocol.

For a Catalyst 6500 series switch equipped with a Supervisor 32/programmable intelligent services accelerator (PISA), the NBAR flow can be exported along with NetFlow export records.

The application-aware NetFlow feature integrates NBAR with NetFlow to provide the ability to export application information collected by NBAR using NetFlow. The application IDs created for the NetFlow Version 9 attribute export application names along with the standard attributes such as IP address and TCP/UDP port information. The NetFlow collector collects these flows based on the source IP address and ID. The source ID refers to the unique identification for flows exported from a particular device.

The NBAR data exported to the NetFlow collector contains application mapping information. Using the NetFlow Data export options, the table containing the application IDs mapped to their application names is exported to the NetFlow collector. The mapping table is sent using the ip flow-export template options nbar command. By default, the mapping information is refreshed every 30 minutes. You can configure the refresh interval by using the ip flow-export template options timeout-rate command.

NetFlow export uses several aging mechanisms to manage the NetFlow cache. However, the NBAR data export intervals do not use NetFlow aging parameters.

Benefits of NBAR NetFlow Integration

NBAR enables network administrators to track a variety of protocols and the amount of traffic generated by each protocol. NBAR also allows network administrators to organize traffic into classes. These classes can then be used to provide different levels of service for network traffic, thereby allowing better network management by providing the appropriate level of network resources for network traffic.

How to Configure NetFlow Layer 2 and Security Monitoring Exports

Configuring NetFlow Layer 2 and Security Monitoring Exports

Before You Begin

Cisco Express Forwarding (formerly known as CEF), distributed Cisco Express Forwarding (formerly known as dCEF), or fast switching for IP must be configured on your system before you configure the NetFlow Layer 2 and Security Monitoring Exports feature.

The task in the "Verifying NetFlow Layer 2 and Security Monitoring Exports" section uses the show ip cache verbose flow command to display the values of the fields; the NetFlow Layer 2 and Security Monitoring Exports feature is configured to capture the values of these fields. In order to display the values of the fields, your router must forward the IP traffic that meets the criteria for these fields. For example, if you configure the ip flow-capture ip-id command, your router must be forwarding IP datagrams to capture the IP ID values from the IP datagrams in the flow.

Depending on the release that your router supports, you can capture the values of the Layer 3 IP fragment offset field from the IP headers in your IP traffic using the ip flow-capture fragment-offset command.

SUMMARY STEPS

    1.    enable

    2.    configure terminal

    3.    ip flow-capture fragment-offset

    4.    ip flow-capture icmp

    5.    ip flow-capture ip-id

    6.    ip flow-capture mac-addresses

    7.    ip flow-capture packet-length

    8.    ip flow-capture ttl

    9.    ip flow-capture vlan-id

    10.    interface type [number | slot / port]

    11.    Enter one of the following commands:

    • ip flow ingress
    • ip flow egress

    12.    exit


DETAILED STEPS
     Command or ActionPurpose
    Step 1 enable


    Example:
    Device> enable
     

    Enables privileged EXEC mode.

    • Enter your password if prompted.

     
    Step 2 configure terminal


    Example:
    Device# configure terminal
     

    Enters global configuration mode.

     
    Step 3 ip flow-capture fragment-offset


    Example:
    Device(config)# ip flow-capture fragment-offset
     

    (Optional) Enables the software to capture the value of the IP fragment offset field from the first fragmented IP datagram in a flow.

     
    Step 4 ip flow-capture icmp


    Example:
    Device(config)# ip flow-capture icmp
     

    (Optional) Enables the software to capture the value of the ICMP type and code fields from ICMP datagrams in a flow.

     
    Step 5 ip flow-capture ip-id


    Example:
    Device(config)# ip flow-capture ip-id
     

    (Optional) Enables the software to capture the value of the IP ID field from the first IP datagram in a flow.

     
    Step 6 ip flow-capture mac-addresses


    Example:
    Device(config)# ip flow-capture mac-addresses
     

    (Optional) Enables the software to capture the values of the source and destination MAC addresses from the traffic in a flow.

     
    Step 7 ip flow-capture packet-length


    Example:
    Device(config)# ip flow-capture packet-length
     

    (Optional) Enables the software to capture the minimum and maximum values of the packet length field from IP datagrams in a flow.

     
    Step 8 ip flow-capture ttl


    Example:
    Device(config)# ip flow-capture ttl
     

    (Optional) Enables the software to capture the minimum and maximum values of the time-to-live (TTL) field from IP datagrams in a flow.

     
    Step 9 ip flow-capture vlan-id


    Example:
    Device(config)# ip flow-capture vlan-id
     

    (Optional) Enables the software to capture the 802.1q or ISL VLAN-ID field from VLAN encapsulated frames in a flow that is received or transmitted on trunk ports.

     
    Step 10 interface type [number | slot / port]


    Example:
    Device(config)# interface ethernet 0/0
     

    Enters interface configuration mode for the type of interface specified in the command.

     
    Step 11 Enter one of the following commands:
    • ip flow ingress
    • ip flow egress


    Example:
    Device(config-if)# ip flow ingress
    or
    Device(config-if)# ip flow egress
     

    Enables ingress NetFlow data collection on the interface.

    or

    Enables egress NetFlow data collection on the interface.

     
    Step 12 exit


    Example:
    Device(config-if)# exit
     

    Exits interface configuration mode.

     

    Verifying NetFlow Layer 2 and Security Monitoring Exports

    Perform this task to verify the configuration of NetFlow Layer 2 and Security Monitoring Exports.

    Restrictions

    The Verifying NetFlow Layer 2 and Security Monitoring Exports task uses the show ip cache verbose flow command. The following restrictions apply to using the show ip cache verbose flow command.

    Displaying Detailed NetFlow Cache Information on Platforms Running Distributed Cisco Express Forwarding

    On platforms running distributed Cisco Express Forwarding (formerly known as dCEF), NetFlow cache information is maintained on each line card or Versatile Interface Processor (VIP). If you want to use the show ip cache verbose flow command to display this information on a distributed platform, you must enter the command at a line card prompt.

    Cisco 7500 Series Platform

    To display detailed NetFlow cache information on a Cisco 7500 series router that is running distributed Cisco Express Forwarding (formerly known as dCEF), enter the following sequence of commands:

    Device# if-con
     
    slot-number
    LC-
    slot-number
    # show ip cache verbose flow
     
    

    Depending on your release, you can retrieve detailed NetFlow cache information. Enter the following command to display detailed NetFlow cache information:

    Device# execute-on 
    slot-number 
    show ip cache verbose flow
     
     

    Cisco 12000 Series Platform

    To display detailed NetFlow cache information on a Cisco 12000 series router, enter the following sequence of commands:

    Device# attach
    slot-number
    LC-
    slot-number
    # show ip cache verbose flow
     
    

    Depending on your release, you can retrieve detailed NetFlow cache information. Enter the following command to display detailed NetFlow cache information:

    Device# execute-on slot-number show ip cache verbose flow
     
    

    The following sample output shows values from the Layer 2 and Layer 3 fields in the flows captured by the NetFlow Layer 2 and Security Monitoring Exports feature.

    Device# show ip cache verbose flow
    
    IP packet size distribution (25229 total packets):
       1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
       .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
        512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
       .000 .000 .000 .206 .793 .000 .000 .000 .000 .000 .000
    IP Flow Switching Cache, 278544 bytes
      6 active, 4090 inactive, 17 added
      505 ager polls, 0 flow alloc failures
      Active flows timeout in 1 minutes
      Inactive flows timeout in 10 seconds
    IP Sub Flow Cache, 25736 bytes
      12 active, 1012 inactive, 39 added, 17 added to flow
      0 alloc failures, 0 force free
      1 chunk, 1 chunk added
      last clearing of statistics never
    Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
    --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
    TCP-Telnet           1      0.0       362   940      2.7      60.2       0.0
    TCP-FTP              1      0.0       362   840      2.7      60.2       0.0
    TCP-FTPD             1      0.0       362   840      2.7      60.1       0.1
    TCP-SMTP             1      0.0       361  1040      2.7      60.0       0.1
    UDP-other            5      0.0         1    66      0.0       1.0      10.6
    ICMP                 2      0.0      8829  1378    135.8      60.7       0.0
    Total:              11      0.0      1737  1343    147.0      33.4       4.8
    SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
    Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
    Et0/0.1        10.251.138.218  Et1/0.1        172.16.10.2     06 80  00      65 
    0015 /0  0                     0015 /0  0     10.0.0.0               840    10.8
    MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
    Min plen:      840                            Max plen:       840
    Min TTL:        59                            Max TTL:         59
    IP id:           0

    Configuring NBAR Support for NetFlow Exports

    Perform this task to export NBAR data to the Cisco NetFlow Collector Software.

    Before You Begin

    You must enable NetFlow Version 9 and NBAR before you configure NBAR data export.

    You must add and configure the following fields to the Cisco NetFlow Collector Software to identify the flow exported by the NBAR data export feature:

    • app_id field as an integer with Numeric ID of 95.

    • app_name field as a UTF-8 String with Numeric ID of 96.

    • sub_app_id field as an integer with Numeric ID of 97.

    • biflowDirection field as an integer with Numeric ID of 239.


    Note


    The biflowDirection field provides information about the host that initiates the session. The size of this field is one byte. RFC 5103 provides details for using this field.



    Note


    NBAR support can be configured only with the NetFlow Version 9 format. If you try to configure NBAR data export with other versions, the following error message appears:

    1d00h: %FLOW : Export version 9 not enabled
    

    NBAR data export does not use NetFlow aging parameters.


    SUMMARY STEPS

      1.    enable

      2.    configure terminal

      3.    ip flow-export version 9

      4.    ip flow-capture nbar

      5.    ip flow-export template options nbar

      6.    exit

      7.    show ip flow export nbar

      8.    clear ip flow stats nbar


    DETAILED STEPS
       Command or ActionPurpose
      Step 1 enable


      Example:
      Router> enable
       

      Enables privileged EXEC mode.

      • Enter your password if prompted.

       
      Step 2 configure terminal


      Example:
      Router# configure terminal
       

      Enters global configuration mode.

       
      Step 3 ip flow-export version 9


      Example:
      Router(config)# ip flow-capture version 9
       

      Enables the Version 9 format to export NetFlow cache entries.

       
      Step 4 ip flow-capture nbar


      Example:
      Router(config)# ip flow-capture nbar
       

      Enables you to capture the NBAR data in NetFlow export records.

       
      Step 5 ip flow-export template options nbar


      Example:
      Router(config)# ip flow-export template options nbar
       

      Exports application mapping information to the Cisco NetFlow Collector Software.

       
      Step 6 exit


      Example:
      Router(config)# exit
       

      Exits global configuration mode.

       
      Step 7 show ip flow export nbar


      Example:
      Router# show ip flow export nbar
       

      (Optional) Displays NBAR export records.

       
      Step 8 clear ip flow stats nbar


      Example:
      Router# clear ip flow stats nbar
       

      (Optional) Clears NetFlow accounting statistics for NBAR.

       

      Configuration Examples for NetFlow Layer 2 and Security Monitoring Exports

      Example: Configuring NetFlow Layer 2 and Security Monitoring Exports

      The following example shows how to configure the NetFlow Layer 2 and Security Monitoring Exports feature:

      Router> enable
      Router# configure terminal
      Router(config)# ip flow-capture fragment-offset
      Router(config)# ip flow-capture icmp
      Router(config)# ip flow-capture ip-id
      Router(config)# ip flow-capture mac-addresses
      Router(config)# ip flow-capture packet-length
      Router(config)# ip flow-capture ttl
      Router(config)# ip flow-capture vlan-id
      Router(config)# interface ethernet 0/0
      Router(config-if)# ip flow ingress
      or
      Router(config-if)# ip flow egress
      Router(config-if)# exit

      Example: Analyzing a Simulated FTP Attack

      The following example shows how to use the NetFlow Layer 2 and Security Monitoring Exports feature to find out whether your network is being attacked by a host that is sending fake FTP traffic in an attempt to overwhelm the FTP server. This attack might cause end users to see a degradation in the ability of the FTP server to accept new connections or to service existing connections.

      Figure 7 shows a network in which Host A is sending fake FTP packets to the FTP server.

      This example also shows you how to use the Layer 2 data, captured by the NetFlow Layer 2 and Security Monitoring Exports feature, to learn where the traffic is originating and what path it is taking through the network.

      Figure 7. Test Network


      Tip


      Track the MAC addresses and IP addresses of the devices in your network. You can use them to analyze attacks and resolve problems.



      Note


      This example does not include the ip flow-capture icmp command, which captures the value of the ICMP type and code fields.


      R2

      !
      hostname R2
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc02
       ip address 172.16.1.2 255.255.255.0
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc03
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 5
       ip address 172.16.6.1 255.255.255.0
      !
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !

      R3

      !
      hostname R3
      !
      ip flow-capture fragment-offset
      ip flow-capture packet-length
      ip flow-capture ttl
      ip flow-capture vlan-id
      ip flow-capture ip-id
      ip flow-capture mac-addresses
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc04
       no ip address
      !
      interface Ethernet0/0.1
       encapsulation dot1Q 5
       ip address 172.16.6.2 255.255.255.0
       ip accounting output-packets
       ip flow ingress
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc05
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 6
       ip address 172.16.7.1 255.255.255.0
       ip accounting output-packets
       ip flow egress
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !

      R4

      !
      hostname R4
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc07
       ip address 172.16.10.1 255.255.255.0
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc06
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 6
       ip address 172.16.7.2 255.255.255.0
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !
      

      The show ip cache verbose flow command displays the NetFlow flows that have been captured from the FTP traffic that Host A is sending.

      The fields that have values captured by the ip flow-capture command are shown in Table 6. The fields and values are used to analyze the traffic for this example. The other fields captured by the show ip cache verbose flow command are explained in subsequent tables (Table 7 to Table 9).

      R3# show ip cache verbose flow
       
      IP packet size distribution (3596 total packets):
         1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
         .000 .003 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
          512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
         .000 .000 .000 .995 .000 .000 .000 .000 .000 .000 .000
      

      The preceding output shows the percentage distribution of packets by size. In this display, 99.5 percent of the packets fall in the 1024-byte size range, and 0.3 percent fall in the 64-byte range.

      The rest of the output of the show ip cache verbose flow command is as follows:

      IP Flow Switching Cache, 278544 bytes
        5 active, 4091 inactive, 25 added
        719 ager polls, 0 flow alloc failures
        Active flows timeout in 1 minutes
        Inactive flows timeout in 10 seconds
      IP Sub Flow Cache, 25736 bytes
        10 active, 1014 inactive, 64 added, 25 added to flow
        0 alloc failures, 0 force free
        1 chunk, 1 chunk added
        last clearing of statistics never
      Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
      --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
      TCP-FTP              5      0.0       429   840      6.6      58.1       1.8
      Total:               5      0.0       129   835      6.6      17.6       7.9
      SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
      Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
      Et0/0.1        10.132.221.111  Et1/0.1        172.16.10.2     06 80  00     198 
      0015 /0  0                     0015 /0  0     0.0.0.0               840    41.2
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      840                            Max plen:       840
      Min TTL:        59                            Max TTL:         59
      IP id:           0 
      Et0/0.1        10.251.138.218  Et1/0.1        172.16.10.2     06 80  00     198 
      0015 /0  0                     0015 /0  0     0.0.0.0               840    41.2
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      840                            Max plen:       840
      Min TTL:        59                            Max TTL:         59
      IP id:           0
      Et0/0.1        10.10.12.1      Et1/0.1        172.16.10.2     06 80  00     203 
      0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      840                            Max plen:       840
      Min TTL:        59                            Max TTL:         59
      IP id:           0
      Et0/0.1        10.231.185.254  Et1/0.1        172.16.10.2     06 80  00     203 
      0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      840                            Max plen:       840
      Min TTL:        59                            Max TTL:         59
      IP id:           0
      Et0/0.1        10.71.200.138   Et1/0.1        172.16.10.2     06 80  00     203 
      0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      840                            Max plen:       840
      Min TTL:        59                            Max TTL:         59
      IP id:           0
      R3#
      

      Table 6 describes the significant fields shown in the NetFlow cache section of the output.

      Table 6 Field Descriptions in the NetFlow Cache Section of the Output

      Field

      Description

      bytes

      Number of bytes of memory used by the NetFlow cache.

      active

      Number of active flows in the NetFlow cache at the time this command was entered.

      inactive

      Number of flow buffers that are allocated in the NetFlow cache but that were not assigned to a specific flow at the time this command was entered.

      added

      Number of flows created since the start of the summary period.

      ager polls

      Number of times the NetFlow code caused entries to expire (used by Cisco Customer Support Engineers (CSEs) for diagnostic purposes).

      flow alloc failures

      Number of times the NetFlow code tried to allocate a flow but could not.

      last clearing of statistics

      The period of time that has passed since the clear ip flow stats command was last executed. The standard time output format of hours, minutes, and seconds (hh:mm:ss) is used for a period of time less than 24 hours. This time output format changes to hours and days after the time exceeds 24 hours.

      Table 7 describes the significant fields shown in the activity by the protocol section of the output.

      Table 7 Field Descriptions in the Activity by Protocol Section of the Output

      Field

      Description

      Protocol

      IP protocol and the well-known port number. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

      Note   

      Only a small subset of all protocols is displayed.

      Total Flows

      Number of flows for this protocol since the last time statistics were cleared.

      Flows/Sec

      Average number of flows for this protocol per second, which is equal to the total flows divided by the number of seconds for this summary period.

      Packets/Flow

      Average number of packets for the flows for this protocol, which is equal to the total packets for this protocol divided by the number of flows for this protocol for this summary period.

      Bytes/Pkt

      Average number of bytes for the packets for this protocol, which is equal to the total bytes for this protocol divided by the total number of packets for this protocol for this summary period.

      Packets/Sec

      Average number of packets for this protocol per second, which is equal to the total packets for this protocol divided by the total number of seconds for this summary period.

      Active(Sec)/Flow

      Number of seconds between the first and the last packet of an expired flow divided by the number of total flows for this protocol, for this summary period.

      Idle(Sec)/Flow

      Number of seconds observed from the last packet in each nonexpired flow for this protocol until the time at which the show ip cache verbose flow command was entered divided by the total number of flows for this protocol, for this summary period.

      Table 8 describes the significant fields in the NetFlow record section of the output.

      Table 8 Field Descriptions in the NetFlow Record Section of the Output

      Field

      Description

      SrcIf

      Interface on which the packet was received.

      Port Msk AS

      Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. This is always set to 0 in Multiprotocol Label Switching (MPLS) flows.

      SrcIPaddress

      The source IP address of the traffic in the five flows. The traffic is using five different IP source addresses. They are:

      • 10.132.221.111

      • 10.251.138.218

      • 10.10.12.1

      • 10.231.185.254

      • 10.71.200.138

      DstIf

      Interface from which the packet was sent.

      Note   

      If an asterisk (*) immediately follows the DstIf field, the flow being shown is an egress flow.

      Port Msk AS

      Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. The value of this field is always set to 0 in MPLS flows.

      DstIPaddress

      The destination IP address of the traffic.

      Note   

      172.17.10.2 is the IP address of the FTP server.

      NextHop

      The Border Gateway Protocol (BGP) next-hop address. This is always set to 0 in MPLS flows.

      Pr

      IP protocol “well-known” port number, displayed in hexadecimal format. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

      ToS

      Type of service, displayed in hexadecimal format.

      B/Pk

      Average number of bytes observed in the packets seen for this flow.

      Flgs

      TCP flag, shown in hexadecimal format. This value is the result of bitwise OR of the TCP flags from all packets in the flow.

      Pkts

      Number of packets in this flow.

      Active

      Time the flow has been active.

      Table 9 describes the fields and values for the NetFlow Traffic Classification and Identification fields for the NetFlow record lines section of the output.

      Table 9 NetFlow Traffic Classification and Identification Fields in the NetFlow Record lines section of the Output

      Field

      Description

      MAC

      The source and destination MAC addresses from the traffic, read from left to right in the output.

      • The traffic is received from MAC address aaaa.bbbb.cc03.

      Note   

      This MAC address is interface 1/0.1 on router R2.

      • The traffic is transmitted to MAC address aaaa.bbbb.cc06.

      Note   

      This MAC address is interface 1/0.1 on router R4.

      VLAN id

      The source and destination VLAN IDs, read from left to right in the output.

      • The traffic is received from VLAN 5.

      • The traffic is transmitted to VLAN 6.

      Min plen

      The minimum packet length for packets captured in the five flows.

      The current value is 840.

      Max plen

      The maximum packet length for packets captured in the five flows.

      The current value is 840.

      Min TTL

      The minimum time to live (TTL) for packets captured in the five flows.

      The current value is 59.

      Max TTL

      The maximum TTL for packets captured in the five flows.

      The current value is 59.

      IP ID

      The IP identifier field for the traffic in the five flows.

      The current value is 0.

      The fact that the Layer 3 TTL, identifier, and packet length fields in the five flows have the same values indicates that this traffic is a DoS attack. If this data had been captured from real traffic, the values would normally be different. The fact that all five of these flows have a TTL value of 59 indicates that this traffic is originating from points that are at the same distance from R3. Real user traffic would normally be arriving from different distances; therefore, the TTL values would be different.

      If this traffic is identified as a DoS attack (based on the data captured in the Layer 3 fields), you can use the Layer 2 information in the flows to identify the path the traffic is taking through the network. In this example, the traffic is being sent to R3 on VLAN 5, by R2. You can demonstrate that R2 is transmitting the traffic over interface 1/0.1 because the source MAC address (aaaa.bbbb.cc03) belongs to 1/0.1 on R2. You can identify that R3 is transmitting the traffic using VLAN 6 on interface 1/0.1 to interface 1/0.1 on R4 because the destination MAC address (aaaa.bbbb.cc06) belongs to interface 1/0.1 on R4.

      You can use this information to mitigate this attack. One possible way to mitigate this attack is to configure an extended IP access list that blocks FTP traffic from any host with a source address that is on the 10.0.0.0 network. Another possible solution is to configure a default route for the 10.0.0.0 network that points to the null interface on the router.


      Caution


      Each of these solutions blocks traffic from legitimate hosts on the 10.0.0.0 network. Therefore these solutions should be used only while you identify the point of origin of the attack and decide how to stop it.


      Example: Analyzing a Simulated ICMP Ping Attack

      The following example shows how to use the NetFlow Layer 2 and Security Monitoring Exports feature to learn that your network is being attacked by ICMP traffic. It uses the network shown in Figure 7. Host A is sending very large ICMP ping packets to the FTP server.

      R2

      !
      hostname R2
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc02
       ip address 172.16.1.2 255.255.255.0
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc03
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 5
       ip address 172.16.6.1 255.255.255.0
      !
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !

      R3

      !
      hostname R3
      !
      ip flow-capture fragment-offset
      ip flow-capture packet-length
      ip flow-capture ttl
      ip flow-capture vlan-id
      ip flow-capture icmp
      ip flow-capture ip-id
      ip flow-capture mac-addresses
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc04
       no ip address
      !
      interface Ethernet0/0.1
       encapsulation dot1Q 5
       ip address 172.16.6.2 255.255.255.0
       ip accounting output-packets
       ip flow ingress
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc05
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 6
       ip address 172.16.7.1 255.255.255.0
       ip accounting output-packets
       ip flow egress
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !

      R4

      !
      hostname R4
      !
      interface Ethernet0/0
       mac-address aaaa.bbbb.cc07
       ip address 172.16.10.1 255.255.255.0
      !
      interface Ethernet1/0
       mac-address aaaa.bbbb.cc06
       no ip address
      !
      interface Ethernet1/0.1
       encapsulation dot1Q 6
       ip address 172.16.7.2 255.255.255.0
      !
      router rip
       version 2
       network 172.16.0.0
       no auto-summary
      !
      

      The show ip cache verbose flow command displays the NetFlow flows that have been captured from the ICMP traffic that Host A is sending.

      The fields that have their values captured by the ip flow-capture command are explained in Table 10. The fields and values are used to analyze the traffic for this example. The other fields captured by the show ip cache verbose flow command are explained in the subsequent tables (Table 11 to Table 13).

      R3# show ip cache verbose flow
      
      IP packet size distribution (5344 total packets):
         1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
         .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
          512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
         .000 .000 .000 .166 .832 .000 .000 .000 .000 .000 .000
      

      The preceding output shows the percentage distribution of packets by size. In this display, 16.6 percent of the packets fall in the 1024-byte size range and 83.2 percent fall in the 1536-byte range.

      The rest of the output of the show ip cache verbose flow command is as follows:

      IP Flow Switching Cache, 278544 bytes
        3 active, 4093 inactive, 7 added
        91 ager polls, 0 flow alloc failures
        Active flows timeout in 1 minutes
        Inactive flows timeout in 10 seconds
      IP Sub Flow Cache, 25736 bytes
        7 active, 1017 inactive, 17 added, 7 added to flow
        0 alloc failures, 0 force free
        1 chunk, 0 chunks added
        last clearing of statistics 00:01:13
      Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
      --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
      ICMP                 2      0.0      1500  1378     42.8      11.4      10.9
      Total:               2      0.0       600  1378     42.9      11.5      10.8
      SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
      Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
      Et0/0.1        10.106.1.1      Et1/0.1        172.16.10.2     01 00  10     391 
      0000 /0  0                     0800 /0  0     0.0.0.0              1500     8.6
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      1500                            Max plen:       1500
      Min TTL:         59                            Max TTL:          59
      ICMP type:       8                            ICMP code:        0
      IP id:       13499
      Et0/0.1        10.106.1.1      Et1/0.1        172.16.10.2     01 00  00    1950 
      0000 /0  0                     0000 /0  0     0.0.0.0              1354     8.6
      MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
      Min plen:      772                            Max plen:       1500
      Min TTL:         59                           Max TTL:          59
      ICMP type:       0                            ICMP code:        0
      IP id:       13499                            FO:            185
      R3#
      

      For field descriptions of the NetFlow Cache output, see Table 10.

      Table 10 Field Descriptions in the NetFlow Cache Section of the Output

      Field

      Description

      bytes

      Number of bytes of memory used by the NetFlow cache.

      active

      Number of active flows in the NetFlow cache at the time this command was entered.

      inactive

      Number of flow buffers that are allocated in the NetFlow cache but that were not assigned to a specific flow at the time this command was entered.

      added

      Number of flows created since the start of the summary period.

      ager polls

      Number of times the NetFlow code caused entries to expire (used by Cisco Customer Support Engineers (CSEs) for diagnostic purposes).

      flow alloc failures

      Number of times the NetFlow code tried to but was not able to allocate flows.

      last clearing of statistics

      The period of time that has passed since the clear ip flow stats command was last executed. The standard time output format of hours, minutes, and seconds (hh:mm:ss) is used for a period of time less than 24 hours. The time output format changes to hours and days after the time exceeds 24 hours.

      For field descriptions of the Activity by Protocol lines section of the output, see Table 11.

      Table 11 Field Descriptions in the Activity by Protocol lines section of the Output

      Field

      Description

      Protocol

      IP protocol and the well-known port number. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

      Note   

      Only a small subset of all protocols is displayed.

      Total Flows

      Number of flows for this protocol since the last time statistics were cleared.

      Flows/Sec

      Average number of flows for this protocol per second, which is equal to the total flows divided by the number of seconds for this summary period.

      Packets/Flow

      Average number of packets for the flows for this protocol, which is equal to the total packets for this protocol divided by the number of flows for this protocol for this summary period.

      Bytes/Pkt

      Average number of bytes for the packets for this protocol, which is equal to the total bytes for this protocol divided by the total number of packets for this protocol for this summary period.

      Packets/Sec

      Average number of packets for this protocol per second, which is equal to the total packets for this protocol divided by the total number of seconds for this summary period.

      Active(Sec)/Flow

      Number of seconds between the first and the last packet of an expired flow divided by the number of total flows for this protocol, for this summary period.

      Idle(Sec)/Flow

      Number of seconds observed from the last packet in each nonexpired flow for this protocol until the time at which the show ip cache verbose flow command was entered, divided by the total number of flows for this protocol, for this summary period.

      For field descriptions of the NetFlow Record lines section of the output, see Table 12.

      Table 12 Field Descriptions in the NetFlow Record lines section of the Output

      Field

      Description

      SrcIf

      Interface on which the packet was received.

      Port Msk AS

      Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. The value of this field is always set to 0 in MPLS flows.

      SrcIPaddress

      IP address of the device that transmitted the packet. The sending host is using 10.106.1.1 as the source IP address.

      DstIf

      Interface from which the packet was sent.

      Note   

      If an asterisk (*) immediately follows the DstIf field, the flow being shown is an egress flow.

      Port Msk AS

      Destination port number (displayed in hexadecimal format), IP address mask, and autonomous system. This is always set to 0 in MPLS flows.

      DstIPaddress

      IP address of the destination device.

      NextHop

      The BGP next-hop address. This is always set to 0 in MPLS flows.

      Pr

      IP protocol “well-known” port number, displayed in hexadecimal format. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

      ToS

      Type of service, displayed in hexadecimal format.

      B/Pk

      Average number of bytes observed for the packets seen for this flow.

      Flgs

      TCP flag, shown in hexadecimal format. This value is the result of bitwise OR of the TCP flags from all packets in the flow.

      Pkts

      Number of packets in this flow.

      Active

      Time the flow has been active.

      For field descriptions of the NetFlow Traffic Classification and Identification fields, see Table 13.

      Table 13 NetFlow Traffic Classification and Identification

      Field

      Description

      MAC

      The source and destination MAC addresses from the traffic, read from left to right in the output.

      • The traffic is received from MAC address aaaa.bbbb.cc03.

      Note   

      This MAC address is interface 1/0.1 on router R2.

      • The traffic is transmitted to MAC address aaaa.bbbb.cc06.

      Note   

      This MAC address is interface 1/0.1 on router R4.

      VLAN id

      The source and destination VLAN IDs, read from left to right in the output.

      • The traffic is received from VLAN 5.

      • The traffic is transmitted to VLAN 6.

      Min plen

      The minimum packet length for the packets captured in the two flows.

      The current value for the first flow is 1500.

      The current value for the second flow is 772.

      Max plen

      The maximum packet length for the packets captured in the two flows.

      The current value for the first flow is 1500.

      The current value for the second flow is 1500.

      Min TTL

      The minimum time to live (TTL) for the packets captured in the two flows.

      The current value is 59.

      Max TTL

      The maximum TTL for the packets captured in the two flows.

      The current value is 59.

      IP

      The IP identifier field for the traffic in the flows. The current value is 13499 for the two flows.

      ICMP type

      The Internet Control Message Protocol (ICMP) type field from the ICMP datagram captured in the first flow.

      The value is 8.

      ICMP code

      The ICMP code field from the ICMP datagram captured in the second flow.

      The value is 0.

      FO

      This is the value of the fragment offset field from the first fragmented datagram in the second flow.

      The value is 185.

      Two ICMP flows are shown in the output. They are from the same ICMP datagram because they have the same IP ID field value of 13499. When two ICMP flows have the same IP ID value, the ICMP datagram being analyzed has been fragmented. The first flow has the ICMP type field set to 8, which indicates that this is an ICMP echo request (ping) datagram. The value of 185 in the fragment offset (FO) field in the second flow shows where this fragment will be placed in the memory buffer of the FTP server as the server reassembles the ICMP datagram. The value of 185 applies only to the first fragment of this datagram. The subsequent values will be greater because they include the previous fragments.

      The value of 0 in the ICMP type field of the second flow does not mean that this flow is an ICMP echo reply as Table 13 shows. In this case, the ICMP type field value is set to 0 because the ICMP headers for fragments of ICMP datagrams do not have the type and code fields. The default value of 0 is inserted instead.


      Note


      If this data were captured from a real ICMP attack, it would probably have more than one flow.


      Although you cannot learn the original size of the ICMP datagram from the information shown by the show ip cache verbose flow command, the fact that the datagram was large enough to be fragmented in transit is a good indication that this is not a normal ICMP datagram. Notice the values in the minimum packet length and maximum packet length fields for both flows. The values for both fields are set to 1500 for the first flow. The value for the minimum packet length is set to 772 and the value for the maximum packet length is set to 1500 for the second flow.

      If this traffic is identified as a DoS attack based on the data captured in the Layer 3 fields, you can use the Layer 2 information in the flows to identify the path that the traffic is taking through the network. In this example, the traffic is being sent to R3 on VLAN 5, by R2. Here, R2 is transmitting the traffic over interface 1/0.1 because the source MAC address (aaaa.bbb.cc03) belongs to 1/0.1 on R2. It is evident that R3 is transmitting the traffic using VLAN 6 on interface 1/0.1 to interface 1/0.1 on R4, because the destination MAC address (aaaa.bbbb.cc06) belongs to interface 1/0.1 on R4.

      You can use this information to mitigate the attack. One possible way to mitigate this attack is by configuring an extended IP access list that blocks ICMP traffic from any host with a source address that is on the 10.0.0.0 network. Another possible solution is to configure a default route for the 10.0.0.0 network that points to the null interface on the router.


      Caution


      Each of these solutions blocks traffic from legitimate hosts on the 10.0.0.0 network. Therefore, these solutions should be used only while you identify the point of origin of the attack and decide how to stop it.


      Example: Configuring NBAR Support for NetFlow Exports

      The following example shows how to configure NBAR support for NetFlow exports:

      Device(config)# ip flow-export version 9
      Device(config)# ip flow-capture nbar
      Device(config)# ip flow-export template options nbar
      Device(config)# exit
      

      The following is sample output from the show ip flow export nbar command:

      Device# show ip flow export nbar
      
      Nbar netflow is enabled
      10 nbar flows exported 
      0 nbar flows failed to export due to lack of internal buffers
      

      The following example shows how to clear NBAR data from NetFlow accounting statistics:

      Device# clear ip flow stats nbar
      
      

      Additional References

      Related Documents

      Related Topic

      Document Title

      Cisco IOS master command list, all releases

      Cisco IOS Master Command List, All Releases

      NetFlow commands

      Cisco IOS NetFlow Command Reference

      Overview of NetFlow

      Cisco IOS NetFlow Overview

      Overview of NBAR

      Classifying Network Traffic Using NBAR

      Configuring NBAR

      Configuring NBAR Using the MQC

      Configuring NBAR using protocol-discovery

      Enabling Protocol Discovery

      Capturing and exporting network traffic data

      Configuring NetFlow and NetFlow Data Export

      Information for installing, starting, and configuring the CNS NetFlow Collection Engine

      Cisco CNS NetFlow Collection Engine Documentation

      Standards and RFCs

      Standards/RFCs

      Title

      RFC 5103

      Bidirectional Flow Export Using IP Flow Information Export (IPFIX)

      Technical Assistance

      Description

      Link

      The Cisco Technical Support website contains thousands of pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.

      http:/​/​www.cisco.com/​techsupport

      Feature Information for NetFlow Layer 2 and Security Monitoring Exports

      The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

      Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

      Table 14 Feature Information for NetFlow Layer 2 and Security Monitoring Exports

      Feature Name

      Releases

      Feature Information

      Application-Aware NetFlow

      12.2(18)ZYA2

      The Application-Aware NetFlow feature enables capturing of application information collected by PISA NBAR and exports using NetFlow Version 9.

      The following commands were modified by this feature: clear ip flow stats, ip flow-capture, ip flow-export template options, and show ip flow export.

      NetFlow Layer 2 and Security Monitoring Exports

      12.2(33)SRA

      12.3(14)T

      The NetFlow Layer 2 and Security Monitoring Exports feature enables the capture of values from fields in Layer 2 and Layer 3 of IP traffic for accounting and security analysis.

      The following commands were modified by this feature: ip flow-capture, ip flow-export, and show ip cache verbose flow.

      Support for capturing the value from the fragment offset field of IP headers added to NetFlow Layer 2 and Security Monitoring Exports1

      12.4(2)T

      The fragment-offset keyword for the ip flow-capture command enables capturing the value of the IP fragment offset field from the first fragmented IP datagram in a flow.

      1 This is a minor enhancement. Minor enhancements are not typically listed in Feature Navigator.

      Glossary

      export packet—A type of packet built by a device (for example, a router) with NetFlow services enabled. The packet contains NetFlow statistics. The packet is addressed to another device (for example, the NetFlow Collection Engine). The other device processes the packet (parses, aggregates, and stores information about IP flows).

      flow—A set of packets with the same source IP address, destination IP address, protocol, source/destination ports, type of service, and the same interface on which flow is monitored. Ingress flows are associated with the input interface, and egress flows are associated with the output interface.

      NBAR—A classification engine in the Cisco IOS software that recognizes a wide variety of applications, including web-based and client/server applications.

      NetFlow—Cisco IOS accounting feature that maintains per-flow information.

      NetFlow Aggregation—A NetFlow feature that lets you summarize NetFlow export data on a Cisco IOS router before the data is exported to a NetFlow data collection system such as the NetFlow Collection Engine. This feature lowers bandwidth requirements for NetFlow export data and reduces platform requirements for NetFlow data collection devices.

      NetFlow Collection Engine (formerly NetFlow FlowCollector)—A Cisco application that is used with NetFlow on specific Cisco devices. The NetFlow Collection Engine collects packets from the device that is running NetFlow and decodes, aggregates, and stores them. You can generate reports on various aggregations that can be set up on the NetFlow Collection Engine.

      NetFlow v9—NetFlow export format Version 9. A flexible and extensible means of carrying NetFlow records from a network node to a collector. NetFlow Version 9 has definable record types and is self-describing for easier NetFlow Collection Engine configurations.


      NetFlow Layer 2 and Security Monitoring Exports

      Contents

      NetFlow Layer 2 and Security Monitoring Exports

      The NetFlow Layer 2 and Security Monitoring Exports feature improves your ability to detect and analyze network threats such as denial of service (DoS) attacks by increasing the number of fields from which NetFlow can capture relevant data.

      NetFlow is a Cisco IOS technology that provides statistics on packets flowing through a router. NetFlow is the standard for acquiring IP operational data from IP networks. NetFlow provides network and security monitoring, network planning, traffic analysis, and IP accounting.

      Finding Feature Information

      Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

      Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

      Prerequisites for NetFlow Layer 2 and Security Monitoring Exports

      • Before you configure NetFlow Layer 2 and Security Monitoring Exports, you should understand NetFlow accounting and know how to configure your router to capture IP traffic accounting statistics using NetFlow. See the “Cisco IOS NetFlow Overview” and “Configuring NetFlow and NetFlow Data Export” modules for more details.

      • NetFlow and Cisco Express Forwarding (formerly known as CEF), distributed Cisco Express Forwarding (formerly known as dCEF), or fast switching must be configured on your system.

      • If you want to export the data captured with the NetFlow Layer 2 and Security Monitoring feature, you must configure NetFlow to use the NetFlow Version 9 data export format.

      Information About NetFlow Layer 2 and Security Monitoring Exports

      NetFlow Layer 2 and Security Monitoring

      The Layer 2 and Layer 3 fields supported by the NetFlow Layer 2 and Security Monitoring Exports feature increase the amount of information that can be obtained by NetFlow about the traffic in your network. You can use the network traffic information for applications such as traffic engineering and usage-based billing.

      Layer 3 fields captured by the NetFlow Layer 2 and Security Monitoring Exports feature improve the capabilities of NetFlow for identifying DoS attacks. Layer 2 IP header fields help identify the path that the DoS attack is taking through the network.

      Layer 2 and Layer 3 fields are not key fields. They provide additional information about the traffic in an existing flow. Changes in the values of NetFlow key fields, such as the source IP address, from one packet to the next packet results in the creation of a new flow. For example, if the first packet captured by NetFlow has a source IP address of 10.34.0.2 and the second packet captured has a source IP address of 172.16.213.65, NetFlow will create two separate flows.

      Most DoS attacks consist of an attacker sending the same type of IP datagram repeatedly, in an attempt to overwhelm target systems. In such cases, the incoming traffic often has similar characteristics, such as the same values in each datagram for one or more fields that the NetFlow Layer 2 and Security Monitoring Exports feature can capture.

      The originator of DoS attacks cannot be easily identified because the IP source address of the device sending the traffic is usually forged. However, you can easily trace the traffic back through the network to the router on which it is arriving by using the NetFlow Layer 2 and Security Monitoring Exports feature to capture the MAC address and VLAN-ID fields. If the router on which traffic is arriving supports NetFlow, you can configure the NetFlow Layer 2 and Security Monitoring Exports feature on it to identify the interface on which the traffic is arriving. The figure below shows an example of an attack in progress.

      Figure 1. DoS Attack Arriving over the Internet


      Note


      You can analyze the data captured by NetFlow directly from the router by using the show ip cache verbose flow command or by the Cisco Network Services (CNS) NetFlow Collector Engine.


      Once you have concluded that a DoS attack is taking place by analyzing the Layer 3 fields in the NetFlow flows, you can analyze the Layer 2 fields in the flows to discover the path that the DoS attack is taking through the network.

      An analysis of the data captured by the NetFlow Layer 2 and Security Monitoring Exports feature, for the scenario shown in the above figure, indicates that the DoS attack is arriving on Router C, because the upstream MAC address is from the interface that connects Router C to Switch A. It is also evident that there are no routers between the target host (the e-mail server) and the NetFlow router, because the destination MAC address of the DoS traffic that the NetFlow router is forwarding to the e-mail server is the MAC address of the e-mail server.

      You can learn the MAC address that Host C is using to send traffic to Router C by configuring the NetFlow Layer 2 and Security Monitoring Exports feature on Router C. The source MAC address will be from Host C. The destination MAC address will be for the interface on the NetFlow router.

      Once you know the MAC address that Host C is using and the interface on Router C on which Host C’s DoS attack is arriving, you can mitigate the attack by reconfiguring Router C to block Host C’s traffic. If Host C is on a dedicated interface, you can disable the interface. If Host C is using an interface that carries traffic from other users, you must configure your firewall to block Host C’s traffic, but still allow the traffic from the other users to flow through Router C.

      Layer 2 Information Capture Using NetFlow Layer 2 and Security Monitoring Exports

      The NetFlow Layer 2 and Security Monitoring Exports feature can capture the values of the MAC address and VLAN ID fields from flows. The two supported VLAN types are 802.1q and the Cisco Inter-Switch Link (ISL) protocol.

      Layer 2 MAC Address Fields

      The Layer 2 fields for which the NetFlow Layer 2 and Security Monitoring Exports feature captures the values are as follows:

      • The source MAC address field from frames that are received by the NetFlow router.

      • The destination MAC address field from frames that are transmitted by the NetFlow router.

      • The VLAN ID field from frames that are received by the NetFlow router.

      • The VLAN ID field from frames that are transmitted by the NetFlow router.

      Figure 2 shows the Ethernet Type II and Ethernet 802.3 frame formats. The destination address field and the source address field in the frame formats are the MAC address values that are captured by NetFlow.

      Figure 2. Ethernet Type II and 802.3 Frame Formats

      Table 1 explains the fields for the Ethernet frame formats.

      Table 1 Ethernet Type II and 802.3 Frame Fields

      Field

      Description

      Preamble

      The entry in the Preamble field is an alternating pattern of 0s and 1s that communicates to receiving stations about an incoming frame. It also provides a means for the receiving stations to synchronize their clocks with the incoming bit stream.

      SOF (Start of frame)

      The SOF field holds an alternating pattern of 0s and 1s, ending with two consecutive 1s, indicating that the next bit is the first bit of the first byte of the destination MAC address.

      Destination Address

      The 48-bit destination address identifies which station on the LAN should receive the frame. The first two bits of the destination MAC address are reserved for the following special functions:

      • The first bit in the destination address field indicates whether the address is an individual address (0) or a group address (1).

      • The second bit indicates whether the destination address is globally administered (0) or locally administered (1).

      The remaining 46 bits form a uniquely assigned value that identifies a single station, a defined group of stations, or all stations on the network.

      Source Address

      The 48-bit source address identifies which station transmitted the frame. The source address is always an individual address, and the leftmost bit in the Source Address field is always 0.

      Type

      or

      Length

      Type—In an Ethernet Type II frame, a part of the frame is used for the Type field. The Type field is used to identify the next layer protocol in the frame.

      Length—In an 802.3 Ethernet frame, a part of the frame is used for the Length field. The Length field is used to indicate the length of the Ethernet frame. The value can be from 46 to 1500 bytes.

      Data

      or

      802.2 header and data

      Ethernet Type II—46 to 1500 bytes of data

      or

      802.3/802.2—8 bytes of header and 38 to 1492 bytes of data.

      FCS (Frame Check Sequence)

      This field contains a 32-bit cyclic redundancy check (CRC) value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS is generated for the destination address, source address, Type, and Data fields of the frame. The FCS does not include the data portion of the frame.

      Layer 2 VLAN ID Fields

      NetFlow can capture the value in the VLAN ID field for 802.1q tagged VLANs and Cisco ISL encapsulated VLANs. This section describes the two types of VLANs, 802.1q and ISL.


      Note


      ISL and 802.1q are commonly called VLAN encapsulation protocols.


      Understanding 802.1q VLANs

      Devices that use 802.1q insert a four-byte tag into the original frame before it is transmitted. Figure 3 shows the format of an 802.1q tagged Ethernet frame.

      Figure 3. 802.1q Tagged Ethernet Type II or 802.3 Frame

      Table 2 describes the fields for 802.1q VLANs.

      Table 2 802.1q VLAN Encapsulation Fields

      Field

      Description

      Destination Address

      The 48-bit destination address identifies which stations on the LAN should receive the frame. The first two bits of the destination MAC address are reserved for the following special functions:

      • The first bit in the destination address field indicates whether the address is an individual address (0) or a group address (1).

      • The second bit indicates whether the destination address is globally administered (0) or locally administered (1).

      The remaining 46 bits form a uniquely assigned value that identifies a single station, a defined group of stations, or all stations on the network.

      Source Address

      The 48-bit source address identifies which station transmitted the frame. The source address is always an individual address, and the leftmost bit in the Source Address field is always 0.

      Type

      or

      Length

      Type—In an Ethernet Type II frame, a part of the frame is used for the Type field. The Type field is used to identify the next layer protocol in the frame.

      Length—In an 802.3 Ethernet frame, a part of the frame is used for the Length field. The Length field is used to indicate the length of the Ethernet frame. The value can be from 46 to 1500 bytes.

      Data

      or

      802.2 header and data

      Ethernet Type II—46 to 1500 bytes of data

      or

      802.3/802.2—8 bytes of header and 38 to 1492 bytes of data.

      FCS (Frame Check Sequence)

      This field contains a 32-bit cyclic redundancy check (CRC) value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS is generated for the destination address, source address, Type, and Data fields of the frame. The FCS does not include the data portion of the frame.

      Tag Protocol ID (TPID)

      This 16-bit field is set to a value of 0x8100 to identify the frame as an IEEE 802.1q tagged frame.

      Priority

      This 3-bit field refers to the 802.1p priority. It is also known as user priority. It indicates the frame priority level used for prioritizing traffic and can represent levels 0–7.

      Tag Control Information

      This 2-byte Tag Control Information field consists of the following two subfields:

      • Canonical Format Indentifier (CFI)—If the value of this 1-bit field is 1, the MAC address is in noncanonical format. If the value of this field is 0, the MAC address is in canonical format.

      • VLAN ID—This 12-bit field uniquely identifies the VLAN to which the frame belongs. It can have a value from 0 to 4095.

      Cisco ISL VLANs

      ISL is a Cisco-proprietary protocol for encapsulating frames on a VLAN trunk. Devices that use ISL add an ISL header to the frame. This process is known as VLAN encapsulation. 802.1Q is the IEEE standard for tagging frames on a VLAN trunk. Figure 4 shows the format of a Cisco ISL-encapsulated Ethernet frame.

      Figure 4. Cisco ISL Tagged Ethernet Frame

      Table 3 describes the fields for 802.1q VLANs.

      Table 3 ISL VLAN Encapsulation

      Field

      Description

      DA (destination address)

      This 40-bit field is a multicast address and is set at 0n01-00-0c-00-00 or 0n03-00-0c-00-00. The receiving host determines that the frame is encapsulated in ISL by reading the 40-bit DA field and matching it with one of the two ISL multicast addresses.

      TYPE

      This 4-bit field indicates the type of frame that is encapsulated and to indicate alternative encapsulations.

      TYPE codes:

      • 0000—Ethernet

      • 0001—Token Ring

      • 0010—FDDI

      • 0011—ATM

      USER

      This 4-bit field is used to extend the meaning of the Frame TYPE field. The default USER field value is 0000. For Ethernet frames, the USER field bits 0 and 1 indicate the priority of the packet as it passes through the switch. Whenever traffic can be handled more quickly, the packets with this bit set should take advantage of the quicker path. However, such paths are not required.

      USER codes:

      • xx00—Normal priority

      • xx01—Priority 1

      • xx10—Priority 2

      • xx11—Highest priority

      SA

      This 48-bit field is the source address field of the ISL packet. It should be set to the 802.3 MAC address of the switch port transmitting the frame. The receiving device can ignore the SA field of the frame.

      LEN

      This 16-bit value field stores the actual packet size of the original packet. The LEN field represents the length of the packet in bytes, excluding the DA, TYPE, USER, SA, LEN, and FCS fields. The total length of the excluded fields is 18 bytes, so the LEN field represents the total length minus 18 bytes.

      AAAA03(SNAP)

      The AAAA03 Subnetwork Access Protocol (SNAP) field is a 24-bit constant value of 0xAAAA03.

      HSA

      This 24-bit field represents the upper three bytes (the manufacturer’s ID portion) of the SA field. It must contain the value 0x00-00-0C.

      VLAN

      This 15-bit field is the virtual LAN ID of the packet. This value is used to mark frames on different VLANs.

      BPDU

      The bit in the bridge protocol data unit (BPDU) field is set for all BPDU packets that are encapsulated by the ISL frame. The BPDUs are used by the spanning tree algorithm to learn information about the topology of the network. This bit is also set for Cisco Discovery Protocol and VLAN Trunk Protocol (VTP) frames that are encapsulated.

      INDEX

      This 16-bit field indicates the port index of the source of the packet as it exits the switch. It is used for diagnostic purposes only, and may be set to any value by other devices. It is ignored in received packets.

      RES

      This 16-bit field is used when Token Ring or FDDI packets are encapsulated with an ISL frame.

      Encapsulated FRAME

      This field contains the encapsulated Layer 2 frame.

      FCS

      The FCS field consists of 4 bytes. It includes a 32-bit CRC value, which is created by the sending station and is recalculated by the receiving station, to check for damaged frames. The FCS covers the DA, SA, Length/Type, and Data fields. When an ISL header is attached to a Layer 2 frame, a new FCS is calculated over the entire ISL packet and added to the end of the frame.

      Note   

      The addition of the new FCS does not alter the original FCS that is contained within the encapsulated frame.

      Layer 3 Information Capture Using NetFlow Layer 2 and Security Monitoring Exports

      The five fields that the NetFlow Layer 2 and Security Monitoring Exports feature captures from Layer 3 IP traffic in a flow are the following:

      • Internet Control Message Protocol (ICMP) type and code

      • ID field

      • Fragment offset

      • Packet length field

      • Time-to-live field

      Figure 5 shows the fields in an IP packet header.

      Figure 5. IP Packet Header Fields

      Table 4 describes the header fields in Figure 5.

      Table 4 IP Packet Header Fields

      Field

      Description

      Version

      The version of the IP protocol. If this field is set to 4, it is an IPv4 datagram. If this field is set to 6, it is an IPv6 datagram.

      Note   

      IPv4 and IPv6 headers have different structures.

      IHL (Internet Header Length)

      Internet Header Length is the length of the Internet header in 32-bit word format and thus points to the beginning of the data.

      Note   

      The minimum value for the correct header length is 5.

      ToS

      Type of service (ToS) provides an indication of the abstract parameters of the quality of service desired. These parameters are to be used to guide the selection of the actual service parameters when a networking device transmits a datagram through a particular network.

      Total Length

      Total length is the length of the datagram, measured in octets, including Internet header and data.

      Identification (ID)

      The value in the ID field is entered by the sender. All the fragments of an IP datagram have the same value in the ID field. Subsequent IP datagrams from the same sender will have different values in the ID field.

      Frequently, a host receives fragmented IP datagrams from several senders concurrently. Also, frequently a host receives multiple IP datagrams from the same sender concurrently.

      The value in the ID field is used by the destination host to ensure that the fragments of an IP datagram are assigned to the same packet buffer during the IP datagram reassembly process. The unique value in the ID field is used to prevent the receiving host from mixing together IP datagram fragments of different IP datagrams from the same sender during the IP datagram reassembly process.

      Flags

      A sequence of three bits is used to set and track IP datagram fragmentation parameters. The bits are:

      • 001—The IP datagram can be fragmented. More fragments of the current IP datagram are in transit.

      • 000—The IP datagram can be fragmented. This is the last fragment of the current IP datagram.

      • 010—The IP datagram cannot be fragmented. This is the entire IP datagram.

      Fragment Offset

      This field indicates where in the datagram this fragment belongs.

      TTL (Time-to-Live)

      This field indicates the maximum time the datagram is allowed to remain in the Internet system. If this field contains the value 0, then the datagram must be destroyed. This field is modified in Internet header processing. The TTL is measured in units of seconds, but because every module that processes a datagram must decrease the TTL by at least 1 even if it processes the datagram in less than a second, the TTL must be thought of only as an upper bound on the time a datagram can exist. The intention is to discard undeliverable datagrams and bound the maximum datagram lifetime.

      Protocol

      Indicates the type of transport packet included in the data portion of the IP datagram. Common values are:

      • 1—ICMP

      • 6—TCP

      • 17—UDP

      Header checksum

      A checksum on the header only. Because some header fields, such as the TTL field, change every time an IP datagram is forwarded, this value is recomputed and verified at each point that the Internet header is processed.

      Source IP Address

      IP address of the sending station.

      Destination IP Address

      IP address of the destination station.

      Options and Padding

      The options and padding may appear in datagrams. If they do appear, they must be implemented by all IP modules (host and gateways). Options and padding are always implemented in any particular datagram; transmissions are not.

      Figure 6 shows the fields in an ICMP datagram.

      Figure 6. ICMP Datagram

      Table 5 interprets the packet format in the figure seen above. ICMP datagrams are carried in the data area of an IP datagram, after the IP header.

      Table 5 ICMP Packet Format

      Type

      Name

      Codes

      0

      Echo reply

      0—None.

      1

      Unassigned

      2

      Unassigned

      3

      Destination unreachable

      0—Network unreachable.

      1—Host unreachable.

      2—Protocol unreachable.

      3—Port unreachable.

      4—Fragmentation needed and don't fragment (DF) bit set.

      5—Source route failed.

      6—Destination network unknown.

      7—Destination host unknown.

      8—Source host isolated.

      9—Communication with the destination network is administratively prohibited.

      10—Communication with the destination host is administratively prohibited.

      11—Destination network unreachable for ToS.

      12—Destination host unreachable for ToS.

      4

      Source quench

      0—None.

      5

      Redirect

      0—None.

      0—Redirect datagram for the network.

      1—Redirect datagram for the host.

      2—Redirect datagram for the ToS and network.

      3—Redirect datagram for the ToS and host.

      6

      Alternate host address

      0—Alternate address for the host.

      7

      Unassigned

      8

      Echo

      0—None.

      9

      Router advertisement

      0—None.

      10

      Router selection

      0—None.

      11

      Time exceeded

      0—Time to live exceeded in transit.

      12

      Parameter problem

      0—Pointer indicates the error.

      1—Missing a required option.

      2—Inappropriate length.

      13

      Timestamp

      0—None.

      14

      Timestamp reply

      0—None.

      15

      Information request

      0—None.

      16

      Information reply

      0—None.

      17

      Address mask request

      0—None.

      18

      Address mask reply

      0—None.

      19

      Reserved (for security)

      20–29

      Reserved (for robustness experiment)

      30

      Trace route

      31

      Datagram conversion error

      32

      Mobile host redirect

      33

      IPv6 where-are-you

      34

      IPv6 I-am-here

      35

      Mobile registration request

      36

      Mobile registration reply

      37–255

      Reserved

      NBAR Data Export

      Network based application recognition (NBAR) is a classification engine that recognizes and classifies a wide variety of protocols and applications, including web-based and other difficult-to-classify applications and protocols that use dynamic TCP/UDP port assignments.

      When NBAR recognizes and classifies a protocol or application, the network can be configured to apply the appropriate application mapping with that protocol.

      For a Catalyst 6500 series switch equipped with a Supervisor 32/programmable intelligent services accelerator (PISA), the NBAR flow can be exported along with NetFlow export records.

      The application-aware NetFlow feature integrates NBAR with NetFlow to provide the ability to export application information collected by NBAR using NetFlow. The application IDs created for the NetFlow Version 9 attribute export application names along with the standard attributes such as IP address and TCP/UDP port information. The NetFlow collector collects these flows based on the source IP address and ID. The source ID refers to the unique identification for flows exported from a particular device.

      The NBAR data exported to the NetFlow collector contains application mapping information. Using the NetFlow Data export options, the table containing the application IDs mapped to their application names is exported to the NetFlow collector. The mapping table is sent using the ip flow-export template options nbar command. By default, the mapping information is refreshed every 30 minutes. You can configure the refresh interval by using the ip flow-export template options timeout-rate command.

      NetFlow export uses several aging mechanisms to manage the NetFlow cache. However, the NBAR data export intervals do not use NetFlow aging parameters.

      Benefits of NBAR NetFlow Integration

      NBAR enables network administrators to track a variety of protocols and the amount of traffic generated by each protocol. NBAR also allows network administrators to organize traffic into classes. These classes can then be used to provide different levels of service for network traffic, thereby allowing better network management by providing the appropriate level of network resources for network traffic.

      How to Configure NetFlow Layer 2 and Security Monitoring Exports

      Configuring NetFlow Layer 2 and Security Monitoring Exports

      Before You Begin

      Cisco Express Forwarding (formerly known as CEF), distributed Cisco Express Forwarding (formerly known as dCEF), or fast switching for IP must be configured on your system before you configure the NetFlow Layer 2 and Security Monitoring Exports feature.

      The task in the "Verifying NetFlow Layer 2 and Security Monitoring Exports" section uses the show ip cache verbose flow command to display the values of the fields; the NetFlow Layer 2 and Security Monitoring Exports feature is configured to capture the values of these fields. In order to display the values of the fields, your router must forward the IP traffic that meets the criteria for these fields. For example, if you configure the ip flow-capture ip-id command, your router must be forwarding IP datagrams to capture the IP ID values from the IP datagrams in the flow.

      Depending on the release that your router supports, you can capture the values of the Layer 3 IP fragment offset field from the IP headers in your IP traffic using the ip flow-capture fragment-offset command.

      SUMMARY STEPS

        1.    enable

        2.    configure terminal

        3.    ip flow-capture fragment-offset

        4.    ip flow-capture icmp

        5.    ip flow-capture ip-id

        6.    ip flow-capture mac-addresses

        7.    ip flow-capture packet-length

        8.    ip flow-capture ttl

        9.    ip flow-capture vlan-id

        10.    interface type [number | slot / port]

        11.    Enter one of the following commands:

        • ip flow ingress
        • ip flow egress

        12.    exit


      DETAILED STEPS
         Command or ActionPurpose
        Step 1 enable


        Example:
        Device> enable
         

        Enables privileged EXEC mode.

        • Enter your password if prompted.

         
        Step 2 configure terminal


        Example:
        Device# configure terminal
         

        Enters global configuration mode.

         
        Step 3 ip flow-capture fragment-offset


        Example:
        Device(config)# ip flow-capture fragment-offset
         

        (Optional) Enables the software to capture the value of the IP fragment offset field from the first fragmented IP datagram in a flow.

         
        Step 4 ip flow-capture icmp


        Example:
        Device(config)# ip flow-capture icmp
         

        (Optional) Enables the software to capture the value of the ICMP type and code fields from ICMP datagrams in a flow.

         
        Step 5 ip flow-capture ip-id


        Example:
        Device(config)# ip flow-capture ip-id
         

        (Optional) Enables the software to capture the value of the IP ID field from the first IP datagram in a flow.

         
        Step 6 ip flow-capture mac-addresses


        Example:
        Device(config)# ip flow-capture mac-addresses
         

        (Optional) Enables the software to capture the values of the source and destination MAC addresses from the traffic in a flow.

         
        Step 7 ip flow-capture packet-length


        Example:
        Device(config)# ip flow-capture packet-length
         

        (Optional) Enables the software to capture the minimum and maximum values of the packet length field from IP datagrams in a flow.

         
        Step 8 ip flow-capture ttl


        Example:
        Device(config)# ip flow-capture ttl
         

        (Optional) Enables the software to capture the minimum and maximum values of the time-to-live (TTL) field from IP datagrams in a flow.

         
        Step 9 ip flow-capture vlan-id


        Example:
        Device(config)# ip flow-capture vlan-id
         

        (Optional) Enables the software to capture the 802.1q or ISL VLAN-ID field from VLAN encapsulated frames in a flow that is received or transmitted on trunk ports.

         
        Step 10 interface type [number | slot / port]


        Example:
        Device(config)# interface ethernet 0/0
         

        Enters interface configuration mode for the type of interface specified in the command.

         
        Step 11 Enter one of the following commands:
        • ip flow ingress
        • ip flow egress


        Example:
        Device(config-if)# ip flow ingress
        or
        Device(config-if)# ip flow egress
         

        Enables ingress NetFlow data collection on the interface.

        or

        Enables egress NetFlow data collection on the interface.

         
        Step 12 exit


        Example:
        Device(config-if)# exit
         

        Exits interface configuration mode.

         

        Verifying NetFlow Layer 2 and Security Monitoring Exports

        Perform this task to verify the configuration of NetFlow Layer 2 and Security Monitoring Exports.

        Restrictions

        The Verifying NetFlow Layer 2 and Security Monitoring Exports task uses the show ip cache verbose flow command. The following restrictions apply to using the show ip cache verbose flow command.

        Displaying Detailed NetFlow Cache Information on Platforms Running Distributed Cisco Express Forwarding

        On platforms running distributed Cisco Express Forwarding (formerly known as dCEF), NetFlow cache information is maintained on each line card or Versatile Interface Processor (VIP). If you want to use the show ip cache verbose flow command to display this information on a distributed platform, you must enter the command at a line card prompt.

        Cisco 7500 Series Platform

        To display detailed NetFlow cache information on a Cisco 7500 series router that is running distributed Cisco Express Forwarding (formerly known as dCEF), enter the following sequence of commands:

        Device# if-con
         
        slot-number
        LC-
        slot-number
        # show ip cache verbose flow
         
        

        Depending on your release, you can retrieve detailed NetFlow cache information. Enter the following command to display detailed NetFlow cache information:

        Device# execute-on 
        slot-number 
        show ip cache verbose flow
         
         

        Cisco 12000 Series Platform

        To display detailed NetFlow cache information on a Cisco 12000 series router, enter the following sequence of commands:

        Device# attach
        slot-number
        LC-
        slot-number
        # show ip cache verbose flow
         
        

        Depending on your release, you can retrieve detailed NetFlow cache information. Enter the following command to display detailed NetFlow cache information:

        Device# execute-on slot-number show ip cache verbose flow
         
        

        The following sample output shows values from the Layer 2 and Layer 3 fields in the flows captured by the NetFlow Layer 2 and Security Monitoring Exports feature.

        Device# show ip cache verbose flow
        
        IP packet size distribution (25229 total packets):
           1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
           .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
            512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
           .000 .000 .000 .206 .793 .000 .000 .000 .000 .000 .000
        IP Flow Switching Cache, 278544 bytes
          6 active, 4090 inactive, 17 added
          505 ager polls, 0 flow alloc failures
          Active flows timeout in 1 minutes
          Inactive flows timeout in 10 seconds
        IP Sub Flow Cache, 25736 bytes
          12 active, 1012 inactive, 39 added, 17 added to flow
          0 alloc failures, 0 force free
          1 chunk, 1 chunk added
          last clearing of statistics never
        Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
        --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
        TCP-Telnet           1      0.0       362   940      2.7      60.2       0.0
        TCP-FTP              1      0.0       362   840      2.7      60.2       0.0
        TCP-FTPD             1      0.0       362   840      2.7      60.1       0.1
        TCP-SMTP             1      0.0       361  1040      2.7      60.0       0.1
        UDP-other            5      0.0         1    66      0.0       1.0      10.6
        ICMP                 2      0.0      8829  1378    135.8      60.7       0.0
        Total:              11      0.0      1737  1343    147.0      33.4       4.8
        SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
        Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
        Et0/0.1        10.251.138.218  Et1/0.1        172.16.10.2     06 80  00      65 
        0015 /0  0                     0015 /0  0     10.0.0.0               840    10.8
        MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
        Min plen:      840                            Max plen:       840
        Min TTL:        59                            Max TTL:         59
        IP id:           0

        Configuring NBAR Support for NetFlow Exports

        Perform this task to export NBAR data to the Cisco NetFlow Collector Software.

        Before You Begin

        You must enable NetFlow Version 9 and NBAR before you configure NBAR data export.

        You must add and configure the following fields to the Cisco NetFlow Collector Software to identify the flow exported by the NBAR data export feature:

        • app_id field as an integer with Numeric ID of 95.

        • app_name field as a UTF-8 String with Numeric ID of 96.

        • sub_app_id field as an integer with Numeric ID of 97.

        • biflowDirection field as an integer with Numeric ID of 239.


        Note


        The biflowDirection field provides information about the host that initiates the session. The size of this field is one byte. RFC 5103 provides details for using this field.



        Note


        NBAR support can be configured only with the NetFlow Version 9 format. If you try to configure NBAR data export with other versions, the following error message appears:

        1d00h: %FLOW : Export version 9 not enabled
        

        NBAR data export does not use NetFlow aging parameters.


        SUMMARY STEPS

          1.    enable

          2.    configure terminal

          3.    ip flow-export version 9

          4.    ip flow-capture nbar

          5.    ip flow-export template options nbar

          6.    exit

          7.    show ip flow export nbar

          8.    clear ip flow stats nbar


        DETAILED STEPS
           Command or ActionPurpose
          Step 1 enable


          Example:
          Router> enable
           

          Enables privileged EXEC mode.

          • Enter your password if prompted.

           
          Step 2 configure terminal


          Example:
          Router# configure terminal
           

          Enters global configuration mode.

           
          Step 3 ip flow-export version 9


          Example:
          Router(config)# ip flow-capture version 9
           

          Enables the Version 9 format to export NetFlow cache entries.

           
          Step 4 ip flow-capture nbar


          Example:
          Router(config)# ip flow-capture nbar
           

          Enables you to capture the NBAR data in NetFlow export records.

           
          Step 5 ip flow-export template options nbar


          Example:
          Router(config)# ip flow-export template options nbar
           

          Exports application mapping information to the Cisco NetFlow Collector Software.

           
          Step 6 exit


          Example:
          Router(config)# exit
           

          Exits global configuration mode.

           
          Step 7 show ip flow export nbar


          Example:
          Router# show ip flow export nbar
           

          (Optional) Displays NBAR export records.

           
          Step 8 clear ip flow stats nbar


          Example:
          Router# clear ip flow stats nbar
           

          (Optional) Clears NetFlow accounting statistics for NBAR.

           

          Configuration Examples for NetFlow Layer 2 and Security Monitoring Exports

          Example: Configuring NetFlow Layer 2 and Security Monitoring Exports

          The following example shows how to configure the NetFlow Layer 2 and Security Monitoring Exports feature:

          Router> enable
          Router# configure terminal
          Router(config)# ip flow-capture fragment-offset
          Router(config)# ip flow-capture icmp
          Router(config)# ip flow-capture ip-id
          Router(config)# ip flow-capture mac-addresses
          Router(config)# ip flow-capture packet-length
          Router(config)# ip flow-capture ttl
          Router(config)# ip flow-capture vlan-id
          Router(config)# interface ethernet 0/0
          Router(config-if)# ip flow ingress
          or
          Router(config-if)# ip flow egress
          Router(config-if)# exit

          Example: Analyzing a Simulated FTP Attack

          The following example shows how to use the NetFlow Layer 2 and Security Monitoring Exports feature to find out whether your network is being attacked by a host that is sending fake FTP traffic in an attempt to overwhelm the FTP server. This attack might cause end users to see a degradation in the ability of the FTP server to accept new connections or to service existing connections.

          Figure 7 shows a network in which Host A is sending fake FTP packets to the FTP server.

          This example also shows you how to use the Layer 2 data, captured by the NetFlow Layer 2 and Security Monitoring Exports feature, to learn where the traffic is originating and what path it is taking through the network.

          Figure 7. Test Network


          Tip


          Track the MAC addresses and IP addresses of the devices in your network. You can use them to analyze attacks and resolve problems.



          Note


          This example does not include the ip flow-capture icmp command, which captures the value of the ICMP type and code fields.


          R2

          !
          hostname R2
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc02
           ip address 172.16.1.2 255.255.255.0
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc03
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 5
           ip address 172.16.6.1 255.255.255.0
          !
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !

          R3

          !
          hostname R3
          !
          ip flow-capture fragment-offset
          ip flow-capture packet-length
          ip flow-capture ttl
          ip flow-capture vlan-id
          ip flow-capture ip-id
          ip flow-capture mac-addresses
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc04
           no ip address
          !
          interface Ethernet0/0.1
           encapsulation dot1Q 5
           ip address 172.16.6.2 255.255.255.0
           ip accounting output-packets
           ip flow ingress
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc05
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 6
           ip address 172.16.7.1 255.255.255.0
           ip accounting output-packets
           ip flow egress
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !

          R4

          !
          hostname R4
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc07
           ip address 172.16.10.1 255.255.255.0
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc06
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 6
           ip address 172.16.7.2 255.255.255.0
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !
          

          The show ip cache verbose flow command displays the NetFlow flows that have been captured from the FTP traffic that Host A is sending.

          The fields that have values captured by the ip flow-capture command are shown in Table 6. The fields and values are used to analyze the traffic for this example. The other fields captured by the show ip cache verbose flow command are explained in subsequent tables (Table 7 to Table 9).

          R3# show ip cache verbose flow
           
          IP packet size distribution (3596 total packets):
             1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
             .000 .003 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
              512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
             .000 .000 .000 .995 .000 .000 .000 .000 .000 .000 .000
          

          The preceding output shows the percentage distribution of packets by size. In this display, 99.5 percent of the packets fall in the 1024-byte size range, and 0.3 percent fall in the 64-byte range.

          The rest of the output of the show ip cache verbose flow command is as follows:

          IP Flow Switching Cache, 278544 bytes
            5 active, 4091 inactive, 25 added
            719 ager polls, 0 flow alloc failures
            Active flows timeout in 1 minutes
            Inactive flows timeout in 10 seconds
          IP Sub Flow Cache, 25736 bytes
            10 active, 1014 inactive, 64 added, 25 added to flow
            0 alloc failures, 0 force free
            1 chunk, 1 chunk added
            last clearing of statistics never
          Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
          --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
          TCP-FTP              5      0.0       429   840      6.6      58.1       1.8
          Total:               5      0.0       129   835      6.6      17.6       7.9
          SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
          Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
          Et0/0.1        10.132.221.111  Et1/0.1        172.16.10.2     06 80  00     198 
          0015 /0  0                     0015 /0  0     0.0.0.0               840    41.2
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      840                            Max plen:       840
          Min TTL:        59                            Max TTL:         59
          IP id:           0 
          Et0/0.1        10.251.138.218  Et1/0.1        172.16.10.2     06 80  00     198 
          0015 /0  0                     0015 /0  0     0.0.0.0               840    41.2
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      840                            Max plen:       840
          Min TTL:        59                            Max TTL:         59
          IP id:           0
          Et0/0.1        10.10.12.1      Et1/0.1        172.16.10.2     06 80  00     203 
          0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      840                            Max plen:       840
          Min TTL:        59                            Max TTL:         59
          IP id:           0
          Et0/0.1        10.231.185.254  Et1/0.1        172.16.10.2     06 80  00     203 
          0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      840                            Max plen:       840
          Min TTL:        59                            Max TTL:         59
          IP id:           0
          Et0/0.1        10.71.200.138   Et1/0.1        172.16.10.2     06 80  00     203 
          0015 /0  0                     0015 /0  0     0.0.0.0               840    42.2
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      840                            Max plen:       840
          Min TTL:        59                            Max TTL:         59
          IP id:           0
          R3#
          

          Table 6 describes the significant fields shown in the NetFlow cache section of the output.

          Table 6 Field Descriptions in the NetFlow Cache Section of the Output

          Field

          Description

          bytes

          Number of bytes of memory used by the NetFlow cache.

          active

          Number of active flows in the NetFlow cache at the time this command was entered.

          inactive

          Number of flow buffers that are allocated in the NetFlow cache but that were not assigned to a specific flow at the time this command was entered.

          added

          Number of flows created since the start of the summary period.

          ager polls

          Number of times the NetFlow code caused entries to expire (used by Cisco Customer Support Engineers (CSEs) for diagnostic purposes).

          flow alloc failures

          Number of times the NetFlow code tried to allocate a flow but could not.

          last clearing of statistics

          The period of time that has passed since the clear ip flow stats command was last executed. The standard time output format of hours, minutes, and seconds (hh:mm:ss) is used for a period of time less than 24 hours. This time output format changes to hours and days after the time exceeds 24 hours.

          Table 7 describes the significant fields shown in the activity by the protocol section of the output.

          Table 7 Field Descriptions in the Activity by Protocol Section of the Output

          Field

          Description

          Protocol

          IP protocol and the well-known port number. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

          Note   

          Only a small subset of all protocols is displayed.

          Total Flows

          Number of flows for this protocol since the last time statistics were cleared.

          Flows/Sec

          Average number of flows for this protocol per second, which is equal to the total flows divided by the number of seconds for this summary period.

          Packets/Flow

          Average number of packets for the flows for this protocol, which is equal to the total packets for this protocol divided by the number of flows for this protocol for this summary period.

          Bytes/Pkt

          Average number of bytes for the packets for this protocol, which is equal to the total bytes for this protocol divided by the total number of packets for this protocol for this summary period.

          Packets/Sec

          Average number of packets for this protocol per second, which is equal to the total packets for this protocol divided by the total number of seconds for this summary period.

          Active(Sec)/Flow

          Number of seconds between the first and the last packet of an expired flow divided by the number of total flows for this protocol, for this summary period.

          Idle(Sec)/Flow

          Number of seconds observed from the last packet in each nonexpired flow for this protocol until the time at which the show ip cache verbose flow command was entered divided by the total number of flows for this protocol, for this summary period.

          Table 8 describes the significant fields in the NetFlow record section of the output.

          Table 8 Field Descriptions in the NetFlow Record Section of the Output

          Field

          Description

          SrcIf

          Interface on which the packet was received.

          Port Msk AS

          Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. This is always set to 0 in Multiprotocol Label Switching (MPLS) flows.

          SrcIPaddress

          The source IP address of the traffic in the five flows. The traffic is using five different IP source addresses. They are:

          • 10.132.221.111

          • 10.251.138.218

          • 10.10.12.1

          • 10.231.185.254

          • 10.71.200.138

          DstIf

          Interface from which the packet was sent.

          Note   

          If an asterisk (*) immediately follows the DstIf field, the flow being shown is an egress flow.

          Port Msk AS

          Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. The value of this field is always set to 0 in MPLS flows.

          DstIPaddress

          The destination IP address of the traffic.

          Note   

          172.17.10.2 is the IP address of the FTP server.

          NextHop

          The Border Gateway Protocol (BGP) next-hop address. This is always set to 0 in MPLS flows.

          Pr

          IP protocol “well-known” port number, displayed in hexadecimal format. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

          ToS

          Type of service, displayed in hexadecimal format.

          B/Pk

          Average number of bytes observed in the packets seen for this flow.

          Flgs

          TCP flag, shown in hexadecimal format. This value is the result of bitwise OR of the TCP flags from all packets in the flow.

          Pkts

          Number of packets in this flow.

          Active

          Time the flow has been active.

          Table 9 describes the fields and values for the NetFlow Traffic Classification and Identification fields for the NetFlow record lines section of the output.

          Table 9 NetFlow Traffic Classification and Identification Fields in the NetFlow Record lines section of the Output

          Field

          Description

          MAC

          The source and destination MAC addresses from the traffic, read from left to right in the output.

          • The traffic is received from MAC address aaaa.bbbb.cc03.

          Note   

          This MAC address is interface 1/0.1 on router R2.

          • The traffic is transmitted to MAC address aaaa.bbbb.cc06.

          Note   

          This MAC address is interface 1/0.1 on router R4.

          VLAN id

          The source and destination VLAN IDs, read from left to right in the output.

          • The traffic is received from VLAN 5.

          • The traffic is transmitted to VLAN 6.

          Min plen

          The minimum packet length for packets captured in the five flows.

          The current value is 840.

          Max plen

          The maximum packet length for packets captured in the five flows.

          The current value is 840.

          Min TTL

          The minimum time to live (TTL) for packets captured in the five flows.

          The current value is 59.

          Max TTL

          The maximum TTL for packets captured in the five flows.

          The current value is 59.

          IP ID

          The IP identifier field for the traffic in the five flows.

          The current value is 0.

          The fact that the Layer 3 TTL, identifier, and packet length fields in the five flows have the same values indicates that this traffic is a DoS attack. If this data had been captured from real traffic, the values would normally be different. The fact that all five of these flows have a TTL value of 59 indicates that this traffic is originating from points that are at the same distance from R3. Real user traffic would normally be arriving from different distances; therefore, the TTL values would be different.

          If this traffic is identified as a DoS attack (based on the data captured in the Layer 3 fields), you can use the Layer 2 information in the flows to identify the path the traffic is taking through the network. In this example, the traffic is being sent to R3 on VLAN 5, by R2. You can demonstrate that R2 is transmitting the traffic over interface 1/0.1 because the source MAC address (aaaa.bbbb.cc03) belongs to 1/0.1 on R2. You can identify that R3 is transmitting the traffic using VLAN 6 on interface 1/0.1 to interface 1/0.1 on R4 because the destination MAC address (aaaa.bbbb.cc06) belongs to interface 1/0.1 on R4.

          You can use this information to mitigate this attack. One possible way to mitigate this attack is to configure an extended IP access list that blocks FTP traffic from any host with a source address that is on the 10.0.0.0 network. Another possible solution is to configure a default route for the 10.0.0.0 network that points to the null interface on the router.


          Caution


          Each of these solutions blocks traffic from legitimate hosts on the 10.0.0.0 network. Therefore these solutions should be used only while you identify the point of origin of the attack and decide how to stop it.


          Example: Analyzing a Simulated ICMP Ping Attack

          The following example shows how to use the NetFlow Layer 2 and Security Monitoring Exports feature to learn that your network is being attacked by ICMP traffic. It uses the network shown in Figure 7. Host A is sending very large ICMP ping packets to the FTP server.

          R2

          !
          hostname R2
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc02
           ip address 172.16.1.2 255.255.255.0
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc03
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 5
           ip address 172.16.6.1 255.255.255.0
          !
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !

          R3

          !
          hostname R3
          !
          ip flow-capture fragment-offset
          ip flow-capture packet-length
          ip flow-capture ttl
          ip flow-capture vlan-id
          ip flow-capture icmp
          ip flow-capture ip-id
          ip flow-capture mac-addresses
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc04
           no ip address
          !
          interface Ethernet0/0.1
           encapsulation dot1Q 5
           ip address 172.16.6.2 255.255.255.0
           ip accounting output-packets
           ip flow ingress
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc05
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 6
           ip address 172.16.7.1 255.255.255.0
           ip accounting output-packets
           ip flow egress
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !

          R4

          !
          hostname R4
          !
          interface Ethernet0/0
           mac-address aaaa.bbbb.cc07
           ip address 172.16.10.1 255.255.255.0
          !
          interface Ethernet1/0
           mac-address aaaa.bbbb.cc06
           no ip address
          !
          interface Ethernet1/0.1
           encapsulation dot1Q 6
           ip address 172.16.7.2 255.255.255.0
          !
          router rip
           version 2
           network 172.16.0.0
           no auto-summary
          !
          

          The show ip cache verbose flow command displays the NetFlow flows that have been captured from the ICMP traffic that Host A is sending.

          The fields that have their values captured by the ip flow-capture command are explained in Table 10. The fields and values are used to analyze the traffic for this example. The other fields captured by the show ip cache verbose flow command are explained in the subsequent tables (Table 11 to Table 13).

          R3# show ip cache verbose flow
          
          IP packet size distribution (5344 total packets):
             1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
             .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
              512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
             .000 .000 .000 .166 .832 .000 .000 .000 .000 .000 .000
          

          The preceding output shows the percentage distribution of packets by size. In this display, 16.6 percent of the packets fall in the 1024-byte size range and 83.2 percent fall in the 1536-byte range.

          The rest of the output of the show ip cache verbose flow command is as follows:

          IP Flow Switching Cache, 278544 bytes
            3 active, 4093 inactive, 7 added
            91 ager polls, 0 flow alloc failures
            Active flows timeout in 1 minutes
            Inactive flows timeout in 10 seconds
          IP Sub Flow Cache, 25736 bytes
            7 active, 1017 inactive, 17 added, 7 added to flow
            0 alloc failures, 0 force free
            1 chunk, 0 chunks added
            last clearing of statistics 00:01:13
          Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
          --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
          ICMP                 2      0.0      1500  1378     42.8      11.4      10.9
          Total:               2      0.0       600  1378     42.9      11.5      10.8
          SrcIf          SrcIPaddress    DstIf          DstIPaddress    Pr TOS Flgs  Pkts
          Port Msk AS                    Port Msk AS    NextHop              B/Pk  Active
          Et0/0.1        10.106.1.1      Et1/0.1        172.16.10.2     01 00  10     391 
          0000 /0  0                     0800 /0  0     0.0.0.0              1500     8.6
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      1500                            Max plen:       1500
          Min TTL:         59                            Max TTL:          59
          ICMP type:       8                            ICMP code:        0
          IP id:       13499
          Et0/0.1        10.106.1.1      Et1/0.1        172.16.10.2     01 00  00    1950 
          0000 /0  0                     0000 /0  0     0.0.0.0              1354     8.6
          MAC: (VLAN id) aaaa.bbbb.cc03  (005)          aaaa.bbbb.cc06  (006)
          Min plen:      772                            Max plen:       1500
          Min TTL:         59                           Max TTL:          59
          ICMP type:       0                            ICMP code:        0
          IP id:       13499                            FO:            185
          R3#
          

          For field descriptions of the NetFlow Cache output, see Table 10.

          Table 10 Field Descriptions in the NetFlow Cache Section of the Output

          Field

          Description

          bytes

          Number of bytes of memory used by the NetFlow cache.

          active

          Number of active flows in the NetFlow cache at the time this command was entered.

          inactive

          Number of flow buffers that are allocated in the NetFlow cache but that were not assigned to a specific flow at the time this command was entered.

          added

          Number of flows created since the start of the summary period.

          ager polls

          Number of times the NetFlow code caused entries to expire (used by Cisco Customer Support Engineers (CSEs) for diagnostic purposes).

          flow alloc failures

          Number of times the NetFlow code tried to but was not able to allocate flows.

          last clearing of statistics

          The period of time that has passed since the clear ip flow stats command was last executed. The standard time output format of hours, minutes, and seconds (hh:mm:ss) is used for a period of time less than 24 hours. The time output format changes to hours and days after the time exceeds 24 hours.

          For field descriptions of the Activity by Protocol lines section of the output, see Table 11.

          Table 11 Field Descriptions in the Activity by Protocol lines section of the Output

          Field

          Description

          Protocol

          IP protocol and the well-known port number. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

          Note   

          Only a small subset of all protocols is displayed.

          Total Flows

          Number of flows for this protocol since the last time statistics were cleared.

          Flows/Sec

          Average number of flows for this protocol per second, which is equal to the total flows divided by the number of seconds for this summary period.

          Packets/Flow

          Average number of packets for the flows for this protocol, which is equal to the total packets for this protocol divided by the number of flows for this protocol for this summary period.

          Bytes/Pkt

          Average number of bytes for the packets for this protocol, which is equal to the total bytes for this protocol divided by the total number of packets for this protocol for this summary period.

          Packets/Sec

          Average number of packets for this protocol per second, which is equal to the total packets for this protocol divided by the total number of seconds for this summary period.

          Active(Sec)/Flow

          Number of seconds between the first and the last packet of an expired flow divided by the number of total flows for this protocol, for this summary period.

          Idle(Sec)/Flow

          Number of seconds observed from the last packet in each nonexpired flow for this protocol until the time at which the show ip cache verbose flow command was entered, divided by the total number of flows for this protocol, for this summary period.

          For field descriptions of the NetFlow Record lines section of the output, see Table 12.

          Table 12 Field Descriptions in the NetFlow Record lines section of the Output

          Field

          Description

          SrcIf

          Interface on which the packet was received.

          Port Msk AS

          Source port number (displayed in hexadecimal format), IP address mask, and autonomous system number. The value of this field is always set to 0 in MPLS flows.

          SrcIPaddress

          IP address of the device that transmitted the packet. The sending host is using 10.106.1.1 as the source IP address.

          DstIf

          Interface from which the packet was sent.

          Note   

          If an asterisk (*) immediately follows the DstIf field, the flow being shown is an egress flow.

          Port Msk AS

          Destination port number (displayed in hexadecimal format), IP address mask, and autonomous system. This is always set to 0 in MPLS flows.

          DstIPaddress

          IP address of the destination device.

          NextHop

          The BGP next-hop address. This is always set to 0 in MPLS flows.

          Pr

          IP protocol “well-known” port number, displayed in hexadecimal format. (Refer to http:/​/​www.iana.org, Protocol Assignment Number Services, for the latest RFC values.)

          ToS

          Type of service, displayed in hexadecimal format.

          B/Pk

          Average number of bytes observed for the packets seen for this flow.

          Flgs

          TCP flag, shown in hexadecimal format. This value is the result of bitwise OR of the TCP flags from all packets in the flow.

          Pkts

          Number of packets in this flow.

          Active

          Time the flow has been active.

          For field descriptions of the NetFlow Traffic Classification and Identification fields, see Table 13.

          Table 13 NetFlow Traffic Classification and Identification

          Field

          Description

          MAC

          The source and destination MAC addresses from the traffic, read from left to right in the output.

          • The traffic is received from MAC address aaaa.bbbb.cc03.

          Note   

          This MAC address is interface 1/0.1 on router R2.

          • The traffic is transmitted to MAC address aaaa.bbbb.cc06.

          Note   

          This MAC address is interface 1/0.1 on router R4.

          VLAN id

          The source and destination VLAN IDs, read from left to right in the output.

          • The traffic is received from VLAN 5.

          • The traffic is transmitted to VLAN 6.

          Min plen

          The minimum packet length for the packets captured in the two flows.

          The current value for the first flow is 1500.

          The current value for the second flow is 772.

          Max plen

          The maximum packet length for the packets captured in the two flows.

          The current value for the first flow is 1500.

          The current value for the second flow is 1500.

          Min TTL

          The minimum time to live (TTL) for the packets captured in the two flows.

          The current value is 59.

          Max TTL

          The maximum TTL for the packets captured in the two flows.

          The current value is 59.

          IP

          The IP identifier field for the traffic in the flows. The current value is 13499 for the two flows.

          ICMP type

          The Internet Control Message Protocol (ICMP) type field from the ICMP datagram captured in the first flow.

          The value is 8.

          ICMP code

          The ICMP code field from the ICMP datagram captured in the second flow.

          The value is 0.

          FO

          This is the value of the fragment offset field from the first fragmented datagram in the second flow.

          The value is 185.

          Two ICMP flows are shown in the output. They are from the same ICMP datagram because they have the same IP ID field value of 13499. When two ICMP flows have the same IP ID value, the ICMP datagram being analyzed has been fragmented. The first flow has the ICMP type field set to 8, which indicates that this is an ICMP echo request (ping) datagram. The value of 185 in the fragment offset (FO) field in the second flow shows where this fragment will be placed in the memory buffer of the FTP server as the server reassembles the ICMP datagram. The value of 185 applies only to the first fragment of this datagram. The subsequent values will be greater because they include the previous fragments.

          The value of 0 in the ICMP type field of the second flow does not mean that this flow is an ICMP echo reply as Table 13 shows. In this case, the ICMP type field value is set to 0 because the ICMP headers for fragments of ICMP datagrams do not have the type and code fields. The default value of 0 is inserted instead.


          Note


          If this data were captured from a real ICMP attack, it would probably have more than one flow.


          Although you cannot learn the original size of the ICMP datagram from the information shown by the show ip cache verbose flow command, the fact that the datagram was large enough to be fragmented in transit is a good indication that this is not a normal ICMP datagram. Notice the values in the minimum packet length and maximum packet length fields for both flows. The values for both fields are set to 1500 for the first flow. The value for the minimum packet length is set to 772 and the value for the maximum packet length is set to 1500 for the second flow.

          If this traffic is identified as a DoS attack based on the data captured in the Layer 3 fields, you can use the Layer 2 information in the flows to identify the path that the traffic is taking through the network. In this example, the traffic is being sent to R3 on VLAN 5, by R2. Here, R2 is transmitting the traffic over interface 1/0.1 because the source MAC address (aaaa.bbb.cc03) belongs to 1/0.1 on R2. It is evident that R3 is transmitting the traffic using VLAN 6 on interface 1/0.1 to interface 1/0.1 on R4, because the destination MAC address (aaaa.bbbb.cc06) belongs to interface 1/0.1 on R4.

          You can use this information to mitigate the attack. One possible way to mitigate this attack is by configuring an extended IP access list that blocks ICMP traffic from any host with a source address that is on the 10.0.0.0 network. Another possible solution is to configure a default route for the 10.0.0.0 network that points to the null interface on the router.


          Caution


          Each of these solutions blocks traffic from legitimate hosts on the 10.0.0.0 network. Therefore, these solutions should be used only while you identify the point of origin of the attack and decide how to stop it.


          Example: Configuring NBAR Support for NetFlow Exports

          The following example shows how to configure NBAR support for NetFlow exports:

          Device(config)# ip flow-export version 9
          Device(config)# ip flow-capture nbar
          Device(config)# ip flow-export template options nbar
          Device(config)# exit
          

          The following is sample output from the show ip flow export nbar command:

          Device# show ip flow export nbar
          
          Nbar netflow is enabled
          10 nbar flows exported 
          0 nbar flows failed to export due to lack of internal buffers
          

          The following example shows how to clear NBAR data from NetFlow accounting statistics:

          Device# clear ip flow stats nbar
          
          

          Additional References

          Related Documents

          Related Topic

          Document Title

          Cisco IOS master command list, all releases

          Cisco IOS Master Command List, All Releases

          NetFlow commands

          Cisco IOS NetFlow Command Reference

          Overview of NetFlow

          Cisco IOS NetFlow Overview

          Overview of NBAR

          Classifying Network Traffic Using NBAR

          Configuring NBAR

          Configuring NBAR Using the MQC

          Configuring NBAR using protocol-discovery

          Enabling Protocol Discovery

          Capturing and exporting network traffic data

          Configuring NetFlow and NetFlow Data Export

          Information for installing, starting, and configuring the CNS NetFlow Collection Engine

          Cisco CNS NetFlow Collection Engine Documentation

          Standards and RFCs

          Technical Assistance

          Description

          Link

          The Cisco Technical Support website contains thousands of pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.

          http:/​/​www.cisco.com/​techsupport

          Feature Information for NetFlow Layer 2 and Security Monitoring Exports

          The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

          Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

          Table 14 Feature Information for NetFlow Layer 2 and Security Monitoring Exports

          Feature Name

          Releases

          Feature Information

          Application-Aware NetFlow

          12.2(18)ZYA2

          The Application-Aware NetFlow feature enables capturing of application information collected by PISA NBAR and exports using NetFlow Version 9.

          The following commands were modified by this feature: clear ip flow stats, ip flow-capture, ip flow-export template options, and show ip flow export.

          NetFlow Layer 2 and Security Monitoring Exports

          12.2(33)SRA

          12.3(14)T

          The NetFlow Layer 2 and Security Monitoring Exports feature enables the capture of values from fields in Layer 2 and Layer 3 of IP traffic for accounting and security analysis.

          The following commands were modified by this feature: ip flow-capture, ip flow-export, and show ip cache verbose flow.

          Support for capturing the value from the fragment offset field of IP headers added to NetFlow Layer 2 and Security Monitoring Exports1

          12.4(2)T

          The fragment-offset keyword for the ip flow-capture command enables capturing the value of the IP fragment offset field from the first fragmented IP datagram in a flow.

          1 This is a minor enhancement. Minor enhancements are not typically listed in Feature Navigator.

          Glossary

          export packet—A type of packet built by a device (for example, a router) with NetFlow services enabled. The packet contains NetFlow statistics. The packet is addressed to another device (for example, the NetFlow Collection Engine). The other device processes the packet (parses, aggregates, and stores information about IP flows).

          flow—A set of packets with the same source IP address, destination IP address, protocol, source/destination ports, type of service, and the same interface on which flow is monitored. Ingress flows are associated with the input interface, and egress flows are associated with the output interface.

          NBAR—A classification engine in the Cisco IOS software that recognizes a wide variety of applications, including web-based and client/server applications.

          NetFlow—Cisco IOS accounting feature that maintains per-flow information.

          NetFlow Aggregation—A NetFlow feature that lets you summarize NetFlow export data on a Cisco IOS router before the data is exported to a NetFlow data collection system such as the NetFlow Collection Engine. This feature lowers bandwidth requirements for NetFlow export data and reduces platform requirements for NetFlow data collection devices.

          NetFlow Collection Engine (formerly NetFlow FlowCollector)—A Cisco application that is used with NetFlow on specific Cisco devices. The NetFlow Collection Engine collects packets from the device that is running NetFlow and decodes, aggregates, and stores them. You can generate reports on various aggregations that can be set up on the NetFlow Collection Engine.

          NetFlow v9—NetFlow export format Version 9. A flexible and extensible means of carrying NetFlow records from a network node to a collector. NetFlow Version 9 has definable record types and is self-describing for easier NetFlow Collection Engine configurations.