System Updates

The following topics explain how to update Firepower deployments:

About System Updates

You can use the FMC to upgrade the system software for itself and the devices it manages. You can also update various databases and feeds that provide advanced services.

For FMCs with internet access, the system can often obtain updates directly from Cisco. We recommend you schedule or enable automatic updates whenever possible. Some updates are auto-enabled when you enable the related feature. Other updates you must schedule yourself. After initial setup, we recommend you review all auto-updates and adjust them if necessary.

Table 1. Upgrades and Updates in FMC Deployments

Component

Description

Details

Firepower software

Major software releases contain new features, functionality, and enhancements. They may include infrastructure or architectural changes.

Patches are on-demand updates limited to critical fixes with time urgency.

Hotfixes can address specific customer issues.

Direct Download: Select releases only, usually some time after the release is available for manual download. The length of the delay depends on release type, release adoption, and other factors.

Schedule: Patches only, on System > Tools > Scheduling.

Uninstall: Patches only.

Reimage: Major releases only.

See: Upgrade System Software

Vulnerability database (VDB)

The Cisco vulnerability database (VDB) is a database of known vulnerabilities to which hosts may be susceptible, as well as fingerprints for operating systems, clients, and applications. The system uses the VDB to help determine whether a particular host increases your risk of compromise.

Direct Download: Yes.

Schedule: Yes, on System > Tools > Scheduling.

Uninstall: No.

See: Update the Vulnerability Database (VDB)

Geolocation database (GeoDB)

The Cisco geolocation database (GeoDB) is a database of geographical and connection-related data associated with routable IP addresses.

Direct Download: Yes.

Schedule: Yes, on System > Updates.

Uninstall: No.

See: Update the Geolocation Database

Intrusion rules (SRU)

Intrusion rule updates provide new and updated intrusion rules and preprocessor rules, modified states for existing rules, and modified default intrusion policy settings.

Rule updates may also delete rules, provide new rule categories and default variables, and modify default variable values.

Direct Download: Yes.

Schedule: Yes, on System > Updates.

Uninstall: No.

See: Update Intrusion Rules

Security Intelligence feeds

Security Intelligence feeds are collections of IP addresses, domain names, and URLs that you can use to quickly filter traffic that matches an entry.

Direct Download: Yes.

Schedule: Yes, on Objects > Object Management.

Uninstall: No.

See: List and Feed Updates for Security Intelligence

URL categories and reputations

URL filtering allows you to control access to websites based on the URL’s general classification (category) and risk level (reputation).

Direct Download: Yes.

Schedule: Yes, on System > Integration > Cloud Services or System > Tools > Scheduling, depending on your requirements.

Uninstall: No.

See: Enable URL Filtering Using Category and Reputation

Requirements and Prerequisites for System Updates

Model Support

Any

Supported Domains

Global unless indicated otherwise.

User Roles

Admin

Guidelines and Limitations for System Updates

Before You Update

Before you update any component of your Firepower deployment (including intrusion rules, VDB, or GeoDB) read the release notes or advisory text that accompanies the update. These provide critical and release-specific information, including compatibility, prerequisites, new capabilities, behavior changes, and warnings.

Scheduled Updates

The system schedules tasks — including updates — in UTC. This means that when they occur locally depends on the date and your specific location. Also, because updates are scheduled in UTC, they do not adjust for Daylight Saving Time, summer time, or any such seasonal adjustments that you may observe in your location. If you are affected, scheduled updates occur one hour "later" in the summer than in the winter, according to local time.


Important

We strongly recommend you review scheduled updates to be sure they occur when you intend.

Bandwidth Guidelines

To upgrade a Firepower appliance (or perform a readiness check), the upgrade package must be on the appliance. Firepower upgrade package sizes vary. Make sure you have the bandwidth to perform a large data transfer to your managed devices. See Guidelines for Downloading Data from the Firepower Management Center to Managed Devices (Troubleshooting TechNote).

Update the Vulnerability Database (VDB)

The Cisco vulnerability database (VDB) is a database of known vulnerabilities to which hosts may be susceptible, as well as fingerprints for operating systems, clients, and applications. The system uses the VDB to help determine whether a particular host increases your risk of compromise.

Cisco issues periodic updates to the VDB. The time it takes to update the VDB and its associated mappings on the FMC depends on the number of hosts in your network map. As a rule of thumb, divide the number of hosts by 1000 to determine the approximate number of minutes to perform the update.

If the FMC has internet access, we recommend you schedule tasks to perform automatic recurring VDB update downloads and installations.


Caution

Updating the VDB immediately restarts the Snort process on all managed devices. Additionally, the first deploy after installing the VDB might cause a Snort restart depending on the VDB content. Snort restarts cause an interruption in traffic inspection and, depending on how the managed device handles traffic, possibly interrupts traffic flow. For more information, see Snort® Restart Traffic Behavior.

Manually Update the VDB

To update the VDB, the VDB update package must be on the FMC.

Before you begin

  • Download the update from https://www.cisco.com/go/firepower-software.


    Note

    Beginning with VDB Release 343, all application detector information is available through Cisco Secure Firewall Application Detectors. This site includes a searchable database of application detectors. The Release Notes provide information on changes for a particular VDB release.

  • Consider the update's effect on traffic flow and inspection due to Snort restarts. We recommend performing updates in a maintenance window.

Procedure

Step 1

Choose System > Updates, then click Product Updates.

Step 2

Choose how you want to upload the VDB update to the FMC.

  • Download directly from Cisco.com: Click Download Updates. If it can access the Cisco Support & Download site, the Firepower Management Center downloads the latest VDB. Note that the Firepower Management Center also downloads a package for each patch and hotfix (but not major release) associated with the version your appliances are currently running.
  • Upload manually: Click Upload Update, then Choose File. Browse to the update you downloaded earlier, and click Upload.
VDB updates appear on the same page as Firepower software upgrade and uninstaller packages.

Step 3

Install the update.

  1. Click Install next to the Vulnerability and Fingerprint Database update.

  2. Choose the Firepower Management Center.

  3. Click Install.

Step 4

(Optional) Monitor update progress in the Message Center.

Do not perform tasks related to mapped vulnerabilities until the update completes. Even if the Message Center shows no progress for several minutes or indicates that the update has failed, do not restart the update. Instead, contact Cisco TAC.

After the update completes and Snort restarts, the system uses the new vulnerability information. However, you must deploy before updated application detectors and operating system fingerprints can take effect.

Step 5

Verify update success.

Choose Help > About to view the current VDB version.

What to do next

Deploy configuration changes; see Deploy Configuration Changes.

Update the Geolocation Database

The geolocation database (GeoDB) is a database that you can leverage to view and filter traffic based on geographical location.

The system comes with an initial GeoDB that maps IP addresses to countries/continents, so that information should always be available. If you update the GeoDB, the system also downloads contextual data. This contextual data includes additional location details, as well as connection information such as ISP, connection type, proxy type, domain name, and so on. We issue periodic updates to the GeoDB. You must regularly update the GeoDB to have accurate geolocation information.

The time needed to update the GeoDB depends on your appliance, but can take up to 45 minutes depending on the size of the update—for example, if this is the first time you are downloading the full GeoDB. Although a GeoDB update does not interrupt any other system functions (including the ongoing collection of geolocation information), the update does consume system resources while it completes. Consider this when planning your updates.

The GeoDB update overrides any previous versions of the GeoDB and is effective immediately. When you update the GeoDB, the FMC automatically updates the related data on its managed devices. It may take a few minutes for a GeoDB update to take effect throughout your deployment. You do not need to re-deploy after you update.

The System > Updates > Geolocation Updates page and the Help > About page both list the current version.


Note

In May 2022 we split the GeoDB into two packages: a country code package that maps IP addresses to countries/continents, and an IP package that contains contextual data. The new country code package has the same file name as the old all-in-one package. This allows FMCs running Version 7.1 and earlier to continue to obtain GeoDB updates. However, because this package now contains only country code mappings, the contextual data is no longer updated and will grow stale. To obtain fresh data, upgrade or reimage to Version 7.2+ and update the GeoDB. Note that this split does not affect geolocation rules or traffic handling in any way—those rules rely only on the data in the country code package.

Manually Update the GeoDB (Internet Connection)

You can import a new GeoDB update by automatically connecting to the Support Site only if the appliance has Internet access.

Procedure

Step 1

Choose System > Updates.

Step 2

Click Geolocation Updates.

Step 3

Choose Download and install geolocation update from the Support Site.

Step 4

Click Import.

The system queues a Geolocation Update task, which checks for the latest updates on the Cisco Support Site (http://www.cisco.com/cisco/web/support/index.html).

Step 5

Optionally, monitor the task status; see Viewing Task Messages.

Step 6

After the update finishes, return to the Geolocation Updates page or choose Help > About to confirm that the GeoDB build number matches the update you installed.

Manually Update the GeoDB (No Internet Connection)

Use this procedure to perform an on-demand update of the GeoDB if the FMC does not have internet access.

Procedure

Step 1

Download the GeoDB from the Cisco Support & Download site: https://www.cisco.com/go/firepower-software.

Select or search for your model (or choose any model—you use the same GeoDB for all FMCs), then browse to the Coverage and Content Updates page.

Make sure you download the country code package: Cisco_GEODB_Update-date-build. The IP package is for Version 7.2+.

Step 2

Choose System > Updates > Geolocation Updates.

Step 3

Under One-Time Geolocation Update, choose Upload and install geolocation update.

Step 4

Click Choose File, then browse to the country code package you downloaded earlier.

Step 5

Click Import.

You can monitor update progress in the Message Center.

Step 6

Verify update success.

The Geolocation Updates page and the Help > About page both list the current version.

Schedule GeoDB Updates

If the Firepower Management Center has internet access, we recommend you schedule weekly GeoDB updates.

Before you begin

Make sure the FMC can access the internet.

Procedure

Step 1

Choose System > Updates, then click Geolocation Updates.

Step 2

Under Recurring Geolocation Updates, check Enable Recurring Weekly Updates...

Step 3

Specify the Update Start Time.

Step 4

Click Save.

Update Intrusion Rules

As new vulnerabilities become known, the Cisco Talos Intelligence Group (Talos) releases intrusion rule updates that you can import onto your Firepower Management Center, and then implement by deploying the changed configuration to your managed devices. These updates affect intrusion rules, preprocessor rules, and the policies that use the rules.

Intrusion rule updates are cumulative, and Cisco recommends you always import the latest update. You cannot import an intrusion rule update that either matches or predates the version of the currently installed rules.

An intrusion rule update may provide the following:

  • New and modified rules and rule states—Rule updates provide new and updated intrusion and preprocessor rules. For new rules, the rule state may be different in each system-provided intrusion policy. For example, a new rule may be enabled in the Security over Connectivity intrusion policy and disabled in the Connectivity over Security intrusion policy. Rule updates may also change the default state of existing rules, or delete existing rules entirely.

  • New rule categories—Rule updates may include new rule categories, which are always added.

  • Modified preprocessor and advanced settings—Rule updates may change the advanced settings in the system-provided intrusion policies and the preprocessor settings in system-provided network analysis policies. They can also update default values for the advanced preprocessing and performance options in your access control policies.

  • New and modified variables—Rule updates may modify default values for existing default variables, but do not override your changes. New variables are always added.

In a multidomain deployment, you can import local intrusion rules in any domain, but you can import intrusion rule updates from Talos in the Global domain only.


Caution
The first deploy after importing an intrusion rule update restarts the Snort process, which interrupts traffic inspection. Whether traffic drops during the interruption or passes without further inspection depends on how the target device handles traffic. For more information, see Snort® Restart Traffic Behavior.

Understanding When Intrusion Rule Updates Modify Policies

Intrusion rule updates can affect both system-provided and custom network analysis policies, as well as all access control policies:

  • system provided—Changes to system-provided network analysis and intrusion policies, as well as any changes to advanced access control settings, automatically take effect when you re-deploy the policies after the update.

  • custom—Because every custom network analysis and intrusion policy uses a system-provided policy as its base, or as the eventual base in a policy chain, rule updates can affect custom network analysis and intrusion policies. However, you can prevent rule updates from automatically making those changes. This allows you to update system-provided base policies manually, on a schedule independent of rule update imports. Regardless of your choice (implemented on a per-custom-policy basis), updates to system-provided policies do not override any settings you customized.

Note that importing a rule update discards all cached changes to network analysis and intrusion policies. For your convenience, the Rule Updates page lists policies with cached changes and the users who made those changes.

Deploying Intrusion Rule Updates

For changes made by an intrusion rule update to take effect, you must redeploy configurations. When importing a rule update, you can configure the system to automatically redeploy to affected devices. This approach is especially useful if you allow the intrusion rule update to modify system-provided base intrusion policies.

Recurring Intrusion Rule Updates

You can import rule updates on a daily, weekly, or monthly basis, using the Rule Updates page.

If your deployment includes a high availability pair of Firepower Management Centers, import the update on the primary only. The secondary Firepower Management Center receives the rule update as part of the regular synchronization process.

Applicable subtasks in the intrusion rule update import occur in the following order: download, install, base policy update, and configuration deploy. When one subtask completes, the next subtask begins.

At the scheduled time, the system installs the rule update and deploys the changed configuration as you specified in the previous step. You can log off or use the web interface to perform other tasks before or during the import. When accessed during an import, the Rule Update Log displays a Red Status (red status icon), and you can view messages as they occur in the Rule Update Log detailed view. Depending on the rule update size and content, several minutes may pass before status messages appear.

As a part of initial configuration the FMC configures a daily automatic intrusion rule update from the Cisco support site. (The FMC deploys automatic intrusion rule updates to affected managed devices when it next deploys affected policies.) You can observe the status of this update using the web interface Message Center. If configuring the update fails and your FMC has internet access, we recommend you configure regular intrusion rule updates as described in Schedule Intrusion Rule Updates.

Importing Local Intrusion Rules

A local intrusion rule is a custom standard text rule that you import from a local machine as a plain text file with ASCII or UTF-8 encoding. You can create local rules using the instructions in the Snort users manual, which is available at http://www.snort.org.

In a multidomain deployment, you can import local intrusion rules in any domain. You can view local intrusion rules imported in the current domain and ancestor domains.

Update Intrusion Rules One-Time Manually


Caution
The first deploy after importing an intrusion rule update restarts the Snort process, which interrupts traffic inspection. Whether traffic drops during the interruption or passes without further inspection depends on how the target device handles traffic. For more information, see Snort® Restart Traffic Behavior.

Procedure

Step 1

Manually download the update from the Cisco Support Site (http://www.cisco.com/cisco/web/support/index.html).

Step 2

Choose System > Updates, then click Rule Updates.

Step 3

If you want to move all user-defined rules that you have created or imported to the deleted folder, you must click Delete All Local Rules in the toolbar, then click OK.

Step 4

Choose Rule Update or text rule file to upload and install and click Browse to navigate to and choose the rule update file.

Step 5

If you want to automatically re-deploy policies to your managed devices after the update completes, choose Reapply all policies after the rule update import completes.

Step 6

Click Import. The system installs the rule update and displays the Rule Update Log detailed view.

Note

 

Contact Support if you receive an error message while installing the rule update.

Update Intrusion Rules One-Time Automatically

To import a new intrusion rule update automatically, your appliance must have Internet access to connect to the Support Site.


Caution

The first deploy after importing an intrusion rule update restarts the Snort process, which interrupts traffic inspection. Whether traffic drops during the interruption or passes without further inspection depends on how the target device handles traffic. For more information, see Snort® Restart Traffic Behavior.

Before you begin

Procedure

Step 1

Choose System > Updates.

Tip

 

You can also click Import Rules on the Rule Editor page, which you access by choosing Policies > Intrusion > Intrusion Rules.

Step 2

Click Rule Updates.

Step 3

If you want to move all user-defined rules that you have created or imported to the deleted folder, click Delete All Local Rules in the toolbar, then click OK.

Step 4

Choose Download new Rule Update from the Support Site.

Step 5

If you want to automatically re-deploy the changed configuration to managed devices after the update completes, check the Reapply all policies after the rule update import completes check box.

Step 6

Click Import.

The system installs the rule update and displays the Rule Update Log detailed view.

Caution

 

Contact Support if you receive an error message while installing the rule update.

Schedule Intrusion Rule Updates


Caution

The first deploy after importing an intrusion rule update restarts the Snort process, which interrupts traffic inspection. Whether traffic drops during the interruption or passes without further inspection depends on how the target device handles traffic. For more information, see Snort® Restart Traffic Behavior.

Procedure

Step 1

Choose System > Updates.

Tip

 

You can also click Import Rules on the Rule Editor page, which you access by choosing Policies > Intrusion > Intrusion Rules.

Step 2

Click Rule Updates.

Step 3

If you want to move all user-defined rules that you have created or imported to the deleted folder, click Delete All Local Rules in the toolbar, then click OK.

Step 4

Check Enable Recurring Rule Update Imports from the Support Site check box.

Import status messages appear beneath the Recurring Rule Update Imports section heading.

Step 5

In the Import Frequency field, specify:

  • The frequency of the update (Daily, Weekly, or Monthly)
  • The day of the week or month you want the update to occur
  • The time you want the update to start

Step 6

If you want to automatically re-deploy the changed configuration to your managed devices after the update completes, check the Deploy updated policies to targeted devices after rule update completes check box.

Step 7

Click Save.

Caution

 

Contact Support if you receive an error message while installing the intrusion rule update.

The status message under the Recurring Rule Update Imports section heading changes to indicate that the rule update has not yet run.

Best Practices for Importing Local Intrusion Rules

Observe the following guidelines when importing a local rule file:

  • The rules importer requires that all custom rules are imported in a plain text file encoded in ASCII or UTF-8.

  • The text file name can include alphanumeric characters, spaces, and no special characters other than underscore (_), period (.), and dash (-).

  • The system imports local rules preceded with a single pound character (#), but they are flagged as deleted.

  • The system imports local rules preceded with a single pound character (#), and does not import local rules preceded with two pound characters (##).

  • Rules cannot contain any escape characters.

  • You do not have to specify a Generator ID (GID) when importing a local rule. If you do, specify only GID 1 for a standard text rule.

  • When importing a rule for the first time, do not specify a Snort ID (SID) or revision number. This avoids collisions with SIDs of other rules, including deleted rules. The system will automatically assign the rule the next available custom rule SID of 1000000 or greater, and a revision number of 1.

    If you must import rules with SIDs, the SIDs must be unique numbers between 1,000,000 and 9,999,999.

    In a multidomain deployment, the system assigns SIDs to imported rules from a shared pool used by all domains on the Firepower Management Center. If multiple administrators are importing local rules at the same time, SIDs within an individual domain might appear to be non-sequential, because the system assigned the intervening numbers in the sequence to another domain.

  • When importing an updated version of a local rule you have previously imported, or when reinstating a local rule you have deleted, you must include the SID assigned by the system and a revision number greater than the current revision number. You can determine the revision number for a current or deleted rule by editing the rule.


    Note
    The system automatically increments the revision number when you delete a local rule; this is a device that allows you to reinstate local rules. All deleted local rules are moved from the local rule category to the deleted rule category.

  • Import local rules on the primary Firepower Management Center in a high availability pair to avoid SID numbering issues.

  • The import fails if a rule contains any of the following: .

    • A SID greater than 2147483647.

    • A list of source or destination ports that is longer than 64 characters.

  • Policy validation fails if you enable an imported local rule that uses the deprecated threshold keyword in combination with the intrusion event thresholding feature in an intrusion policy.

  • All imported local rules are automatically saved in the local rule category.

  • The system always sets local rules that you import to the disabled rule state. You must manually set the state of local rules before you can use them in your intrusion policy.

Import Local Intrusion Rules

  • Make sure your local rule file follows the guidelines described in Best Practices for Importing Local Intrusion Rules.

  • Make sure your process for importing local intrusion rules complies with your security policies.

  • Consider the import's effect on traffic flow and inspection due to bandwidth constraints and Snort restarts. We recommend scheduling rule updates during maintenance windows.

  • You can perform this task in any domain.

Use this procedure to import local intrusion rules. Imported intrusion rules appear in the local rule category in a disabled state.

Procedure

Step 1

Choose System > Updates, then click Rule Updates.

Step 2

(Optional) Delete existing local rules.

Click Delete All Local Rules, then confirm that you want to move all created and imported intrusion rules to the deleted folder.

Step 3

Under One-Time Rule Update/Rules Import, choose Rule update or text rule file to upload and install, then click Choose File and browse to your local rule file.

Step 4

Click Import.

Step 5

Monitor import progress in the Message Center.

To display the Message Center, click System Status on the menu bar. Even if the Message Center shows no progress for several minutes or indicates that the import has failed, do not restart the import. Instead, contact Cisco TAC.

What to do next

Rule Update Log

The Firepower Management Center generates a record for each rule update and local rule file that you import.

Each record includes a time stamp, the name of the user who imported the file, and a status icon indicating whether the import succeeded or failed. You can maintain a list of all rule updates and local rule files that you import, delete any record from the list, and access detailed records for all imported rules and rule update components.

The Rule Update Import Log detailed view lists a detailed record for each object imported in a rule update or local rule file. You can also create a custom workflow or report from the records listed that includes only the information that matches your specific needs.

Intrusion Rule Update Log Table

Table 2. Intrusion Rule Update Log Fields

Field

Description

Summary

The name of the import file. If the import fails, a brief statement of the reason for the failure appears under the file name.

Time

The time and date that the import started.

User ID

The user name of the user that triggered the import.

Status

Whether the import:

  • Succeeded (succeeded icon)

  • failed or is currently in progress  Red Status (red status icon)

The red status icon indicating an unsuccessful or incomplete import appears on the Rule Update Log page during the import and is replaced by the green icon only when the import has successfully completed.


Tip

You can view import details as they appear while an intrusion rule update import is in progress.

Viewing the Intrusion Rule Update Log

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

Procedure

Step 1

Choose System > Updates.

Tip

 

You can also click Import Rules on the intrusion rules editor page (Objects > Intrusion Rules).

Step 2

Click Rule Updates.

Step 3

Click Rule Update Log.

Step 4

You have two options:

  • View — To view details for each object imported in a rule update or local rule file, click View (view button) next to the file you want to view; see Viewing Details of the Intrusion Rule Update Import Log.
  • Delete — To delete an import file record from the import log, including detailed records for all objects included with the file, click Delete (delete icon) next to the import file name.

    Note

     

    Deleting the file from the log does not delete any object imported in the import file, but only deletes the import log records.

Fields in an Intrusion Rule Update Log


Tip
You search the entire Rule Update Import Log database even when you initiate a search by clicking Search on the toolbar from the Rule Update Import Log detailed view with only the records for a single import file displayed. Make sure you set your time constraints to include all objects you want to include in the search.
Table 3. Rule Update Import Log Detailed View Fields
Field Description

Action

An indication that one of the following has occurred for the object type:

  • new (for a rule, this is the first time the rule has been stored on this appliance)

  • changed (for a rule update component or rule, the rule update component has been modified, or the rule has a higher revision number and the same GID and SID)

  • collision (for a rule update component or rule, import was skipped because its revision conflicts with an existing component or rule on the appliance)

  • deleted (for rules, the rule has been deleted from the rule update)

  • enabled (for a rule update edit, a preprocessor, rule, or other feature has been enabled in a default policy provided with the system)

  • disabled (for rules, the rule has been disabled in a default policy provided with the system)

  • drop (for rules, the rule has been set to Drop and Generate Events in a default policy provided with the system)

  • error (for a rule update or local rule file, the import failed)

  • apply (the Reapply all policies after the rule update import completes option was enabled for the import)

Default Action

The default action defined by the rule update. When the imported object type is rule, the default action is Pass, Alert, or Drop. For all other imported object types, there is no default action.

Details

A string unique to the component or rule. For rules, the GID, SID, and previous revision number for a changed rule, displayed as previously (GID:SID:Rev). This field is blank for a rule that has not changed.

Domain

The domain whose intrusion policies can use the updated rule. Intrusion policies in descendant domains can also use the rule. This field is only present in a multidomain deployment.

GID

The generator ID for a rule. For example, 1 (standard text rule) or 3 (shared object rule).

Name

The name of the imported object, which for rules corresponds to the rule Message field, and for rule update components is the component name.

Policy

For imported rules, this field displays All. This means that the rule was imported successfully, and can be enabled in all appropriate default intrusion policies. For other types of imported objects, this field is blank.

Rev

The revision number for a rule.

Rule Update

The rule update file name.

SID

The SID for a rule.

Time

The time and date the import began.

Type

The type of imported object, which can be one of the following:

  • rule update component (an imported component such as a rule pack or policy pack)

  • rule (for rules, a new or updated rule; note that in Version 5.0.1 this value replaced the update value, which is deprecated)

  • policy apply (the Reapply all policies after the rule update import completes option was enabled for the import)

Count

The count (1) for each record. The Count field appears in a table view when the table is constrained, and the Rule Update Log detailed view is constrained by default to rule update records. This field is not searchable.

Viewing Details of the Intrusion Rule Update Import Log

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

Procedure

Step 1

Choose System > Updates.

Tip

 

You can also click Import Rules on the Rule Editor page, which you access by choosing Policies > Intrusion > Intrusion Rules.

Step 2

Click Rule Updates.

Step 3

Click Rule Update Log.

Step 4

Click View (view button) next to the file whose detailed records you want to view.

Step 5

You can take any of the following actions:

  • Bookmark—To bookmark the current page, click Bookmark This Page.

  • Edit Search—To open a search page prepopulated with the current single constraint, choose Edit Search or Save Search next to Search Constraints.

  • Manage bookmarks—To navigate to the bookmark management page, click Report Designer.

  • Report—To generate a report based on the data in the current view, click Report Designer.

  • Search—To search the entire Rule Update Import Log database for rule update import records, click Search.

  • Sort—To sort and constain records on the current workflow page, see Using Drill-Down Pages for more information.

  • Switch workflows—To temporarily use a different workflow, click (switch workflows).