IP Routing: BFD Configuration Guide, Cisco IOS XE 17 (NCS 4200 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 27, 2023

Chapter: Feature History

Feature History

Feature History


Feature	Description
Cisco IOS XE Bengaluru 17.6.1
Micro BFD over LAG Convergence Optimization	Starting with 17.6.x release, the convergence for port-channel failures with Fast Reroute (FRR) is less than 50 milliseconds, when min-links is configured and equal to the total-links available under the port-channel. This feature is supported on the Cisco RSP3 module.
Cisco IOS XE Amsterdam 17.3.1
BFD Dampening	Bidirectional Forwarding Detection (BFD) is a detection protocol that is designed to provide fast forwarding path failure detection for encapsulations, topologies, and routing protocols. BFD provides a consistent failure detection method. BFD detects forwarding path failures at a uniform rate, rather than the variable rates for different routing protocol. BFD detects forwarding path failures at a uniform rate, rather than the variable rates for different routing protocol. This feature is supported on the RSP2 module.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)