Implementing Host Services and Applications

Cisco IOS XR software Host Services and Applications features on the router are used primarily for checking network connectivity and the route a packet follows to reach a destination, mapping a hostname to an IP address or an IP address to a hostname, and transferring files between routers and UNIX workstations.

Prerequisites for implementing Host Services and Applications

Ensure to install the relevant optional RPM package before using the host services or applications.

HTTP Client Application

HTTP Client allows files to be transferred from http server to another device over a network using HTTP protocol. You can configure http client and various parameters associated with it by using the http client command.

Configure HTTP Client

HTTP Client application is available by default. You can configure http client settings or view and modify the existing settings. To configure the settings, use the http client command in XR config mode. 

Router #configure
Router(config)#http client ?
connection          Configure HTTP Client connection
response            How long HTTP Client waits for a response from the server
                    for a request message before giving up
secure-verify-host  Verify that if server certificate is for the server it is known as
secure-verify-peer  Verify authenticity of the peer's certificate
source-interface    Specify interface for source address
ssl                 SSL configuration to be used for HTTPS requests
tcp-window-scale    Set tcp window-scale factor for High Latency links
version             HTTP Version to be used in HTTP requests
vrf                 Name of vrf
Table 1. Commands used to configure HTTP Client settings

Features

Description
connection Configure HTTP Client connection by using either retry or timeout options.
response How long HTTP Client waits for a response from the server for a request message before giving up.
secure-verify-host Verify host in peer's certificate. To disable verifying this, you can use the command http client secure-verify-host disable
secure-verify-peer Verify authenticity of the peer's certificate.
source-interface Specifies the interface for source address for all outgoing HTTP connections. You can enter either an ipv4 or ipv6 address or both.
ssl version SSL version (configuration) to be used for HTTPS requests.
tcp-window-scale scale Set tcp window-scale factor for high latency links.
version version

HTTP version to be used in HTTP requests.

  • 1.0 - HTTP1.0 will be used for all HTTP requests.

  • 1.1 - HTTP1.1 will be used for all HTTP requests.

  • default libcurl - will use HTTP version automatically.
vrf name Name of vrf.

Examples

Example 1: This example shows how to set the tcp window-scale to 8. 

Router(config)#http client tcp-window-scale 8

Example 2: This example shows how to set the HTTP version to 1.0. 

Router(config)#http client version 1.0

Note

HTTP Client uses libcurl version 7.30