Prepare to Install Cisco NCS 1001

This chapter explains how to prepare for the Cisco NCS 1001 installation.

Review Safety Warnings

Review the safety warnings available at Regulatory Compliance and Safety Information for Cisco NCS 1000 Series.

Unpack and Verify Cisco NCS 1001

Procedure

Step 1

When you receive Cisco NCS 1001 equipment at the installation site, open the top of the box. The Cisco Systems logo is on the side of the box.

Step 2

Remove accessories and foam inserts from the box. The box contains Cisco NCS 1001 and other items needed for installation.

Step 3

To remove the shelf, grasp the side of the shelf and lift the shelf out of the box.

Step 4

Verify that you have all items.

Table 1.

Item Number

Description

502-00195-01

PKG, BAG, PE, A/S, FLAT, 24, 34, 2MIL

53-100688-01

ACCESSORY KIT and SLIDE RAILS

800-46433-03

ASY-TOP, CHASSIS

NCS1K SW OPT 2

Software Options

NCS1K1 SW OPT

Software Download - RTU not included

Step 5

Verify the following:

  • Cisco NCS 1001 is not damaged.

  • The cable connectors, management ports, console ports, and power connectors are not damaged.

  • The SFP cages on the front panel are not damaged.

  • Verify that outstanding scratch, mark, bend, discoloration or deformation has not occurred to NCS 1001.

Step 6

If there is any damage, call your Cisco sales engineer for a replacement.