Preface

This guide provides an overview and explains how to configure the various features for the T1 or E1 CEM Interface Module.

This document is applicable for the following interface modules:

Table 1. Supported Interface Module

Interface Module

Part Number

Mode

48-port T1/E1 Interface module

  • NCS4200-48T1E1-CE

T1/E1

1-port OC48/ STM-16 or 4-port OC-12/OC-3 / STM-1/STM-4 + 12-Port T1/E1 + 4-Port T3/E3 CEM Interface Module

  • NCS4200-3GMS

Circuit Emulation (CEM) is a technology that provides a protocol-independent transport over IP/MPLS networks. It enables proprietary or legacy applications to be carried transparently to the destination, similar to a leased line.

Document Organization

Chapter

Description

Overview of the T1/E1 Interface Module

Provides a high-level overview of the interface module. Also provides additional information such as restrictions, benefits etc..

Configuring the T1/E1 Interface Module

Provides information about how to configure the interface module.

Monitoring the Interface Module

Provides information on monitoring features for the interface module.

Troubleshooting the Interface Module

Describes features that you can use to troubleshoot the operation of interface module.

Additional References

Provides information on additonal features, technical details.

Related Documentation

  • Alarm Configuring and Monitoring Guide

  • CEM Generic Guide

  • T3 or E3 CEM Interface Module Configuration Guide