Perform Preliminary Checks

After successfully logging into the console, you must perform some preliminary checks to verify the default setup. If any setup issue is detected, take corrective action before making further configurations.


Note

The output of the examples in the procedures is not from the latest software release. The output will change for any explicit references to the current release.

Verify Status of Hardware Components

To verify the status of all the hardware components installed on NCS 1020, perform the following procedure.

Before you begin

Ensure that all the required hardware components are installed on NCS 1020. For installation details, see Cisco Network Convergence System 1020 Hardware Installation Guide.

Procedure

show platform

When you execute this command, the status of Cisco IOS XR is displayed.

Example:

RP/0/RP0/CPU0:ios#show platform

Mon May  6 16:38:13.609 IST

Node              Type                     State                    Config state

--------------------------------------------------------------------------------

0/RP0/CPU0        NCS1010-CTR2-B-K9(Active) IOS XR RUN               NSHUT,NMON

0/FT0             NCS1010-FAN              OPERATIONAL              NSHUT,NMON

0/FT1             NCS1010-FAN              OPERATIONAL              NSHUT,NMON

0/FT4             NCS1020-FAN              OPERATIONAL              NSHUT,NMON

0/FT5             NCS1020-FAN              OPERATIONAL              NSHUT,NMON

0/FT6             NCS1020-FAN              OPERATIONAL              NSHUT,NMON

0/FT7             NCS1020-FAN              OPERATIONAL              NSHUT,NMON

0/0/NXR0          NCS1K-E-OLT-C            OPERATIONAL              NSHUT,NMON

0/1/NXR0          NCS1010-FLR-P            PRESENT                  NSHUT,NMON

0/2/NXR0          NCS1K14-CCMD-16-C        OPERATIONAL              NSHUT,NMON

0/3/NXR0          NCS1K14-CCMD-16-C        OPERATIONAL              NSHUT,NMON

0/4/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/5/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/6/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/7/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/8/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/9/NXR0          NCS1K14-BLANK            PRESENT                  NSHUT,NMON

0/PM0             NCS1K4-AC-PSU-2          OPERATIONAL              NSHUT,NMON

0/PM1             NCS1K4-AC-PSU-2          OPERATIONAL              NSHUT,NMON

Verify that all the components of NCS 1020 are displayed in output. The state must be in the OPERATIONAL state. The various states are:

  • OPERATIONAL—Node is operating normally and is fully functional.

  • POWERED_ON—Power is on and the node is booting up.

  • FAILED—Node is powered on but has encountered an internal failure.

  • PRESENT—Node is in intermediate state in the boot sequence.

  • POWERED_OFF—Power is off and the node cannot be accessed.

  • IOS XR RUN—Node is running IOS XR.

  • OFFLINE—Input power is not connected to the power modules.

Verify Inventory

The show inventory command displays details of the hardware inventory of NCS 1020.

To verify the inventory information for all the physical entities, perform the following procedure.

Procedure

show inventory

Displays the details of the physical entities of NCS 1020 along with the details of SFPs.

Example:

RP/0/RP0/CPU0:ios#show inventory

Mon May  6 16:38:33.857 IST

 

NAME: "Rack 0", DESCR: "NCS 1020 Shelf Assembly"

PID: NCS1020-SA        , VID: V00, SN: FCB2749B0FD

 

NAME: "0/RP0/CPU0", DESCR: "NCS 1010, 1012, 1020 Controller with 9600bps console rate"

PID: NCS1010-CTR2-B-K9 , VID: V00, SN: FCB2748B01S

 

NAME: "0/RP0-PTP0", DESCR: "Cisco Pluggable Optics Module"

PID: ONS-SI-GE-LX      , VID: V01, SN: AGC1703UE1M

 

NAME: "0/RP0-PTP1", DESCR: "Cisco Pluggable Optics Module"

PID: GLC-SX-MMD        , VID: V01, SN: OPM221407E5

 

NAME: "0/RP0-PTP2", DESCR: "Cisco Pluggable Optics Module"

PID: SFP-GE-S          , VID: V01, SN: FNS17040APG

 

NAME: "0/RP0-PTP3", DESCR: "Cisco Pluggable Optics Module"

PID: ONS-SI-GE-LX      , VID: V02, SN: FNS19170MGZ

 

NAME: "0/0/NXR0", DESCR: "NCS 1010 Optical Line Terminal - C-band, enhanced"

PID: NCS1K-E-OLT-C     , VID: V01, SN: FCB2721B1DP

 

NAME: "0/9/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/1/NXR0", DESCR: "Network Convergence System 1010 Passive Filler"

PID: NCS1010-FLR-P     , VID: V01, SN: N/A

 

NAME: "0/2/NXR0", DESCR: "NCS 1014 16 port Colorless Direct attach LC with EDFA C-band"

PID: NCS1K14-CCMD-16-C , VID: V01, SN: FCB2749B06U

 

NAME: "0/3/NXR0", DESCR: "NCS 1014 16 port Colorless Direct attach LC with EDFA C-band"

PID: NCS1K14-CCMD-16-C , VID: V00, SN: FCB2744B0FA

 

NAME: "0/4/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/5/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/6/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/7/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/8/NXR0", DESCR: "Network Convergence System 1014 Filler"

PID: NCS1K14-BLANK     , VID: V01, SN: N/A

 

NAME: "0/FT0", DESCR: "NCS1010 - Shelf Fan"

PID: NCS1010-FAN       , VID: V01, SN: FCB2719B0WP

 

NAME: "0/FT1", DESCR: "NCS1010 - Shelf Fan"

PID: NCS1010-FAN       , VID: V01, SN: FCB2720B2H2

 

NAME: "0/FT4", DESCR: "NCS 1020 FAN Tray"

PID: NCS1020-FAN       , VID: V00, SN: FCB2752B05V

 

NAME: "0/FT5", DESCR: "NCS 1020 FAN Tray"

PID: NCS1020-FAN       , VID: V00, SN: FCB2752B05W

 

NAME: "0/FT6", DESCR: "NCS 1020 FAN Tray"

PID: NCS1020-FAN       , VID: V00, SN: FCB2752B08C

 

NAME: "0/FT7", DESCR: "NCS 1020 FAN Tray"

PID: NCS1020-FAN       , VID: V00, SN: FCB2752B072

 

NAME: "0/PM0", DESCR: "Network Convergence System 1004 AC Power Supply Unit 2.5KW"

PID: NCS1K4-AC-PSU-2   , VID: V01, SN: POG27430N29

 

NAME: "0/PM1", DESCR: "Network Convergence System 1004 AC Power Supply Unit 2.5KW"

PID: NCS1K4-AC-PSU-2   , VID: V01, SN: POG27430N1P

Verify Software Version

NCS 1020 is shipped with the Cisco IOS XR software preinstalled. Verify that the latest version of the software is installed.

To verify the version of Cisco IOS XR Software running on NCS 1020, perform the following procedure.

Procedure

show version

Displays the software version and details such as system uptime.

Example:

RP/0/RP0/CPU0:ios#show version

Mon May  6 16:38:47.424 IST

Cisco IOS XR Software, Version 24.2.1.32I LNT

Copyright (c) 2013-2024 by Cisco Systems, Inc.

 

Build Information:

Built By     : cisco

Built On     : Thu Apr 11 02:06:44 UTC 2024

Build Host   : iox-ucs-033

Workspace    : /auto/iox-ucs-033-san1/prod/24.2.1.32I.SIT_IMAGE/ncs1010/ws/

Version      : 24.2.1.32I

Label        : 24.2.1.32I-MSFT_PILOT

 

cisco NCS1010 (C3758R @ 2.40GHz)

cisco NCS1020-SA (C3758R @ 2.40GHz) processor with 32GB of memory

NCS1020_P1B_DT_10 uptime is 4 days, 5 hours, 9 minutes

NCS 1020 Chassis

Verify Firmware Version

The firmware version on various hardware components of NCS 1020 must be compatible with the installed Cisco IOS XR release. Incompatibility may cause NCS 1020 to malfunction.

To verify the firmware version, perform the following procedure.

Procedure

Step 1

show hw-module fpd

Displays the firmware information of various hardware components of NCS 1020.

Example:

RP/0/RP0/CPU0:ios#show hw-module fpd

Mon May  6 16:39:04.587 IST

 

Auto-upgrade:Enabled

Attribute codes: B golden, P protect, S secure, A Anti Theft aware

                                                                         FPD Versions

                                                                        ==============

Location   Card type             HWver FPD device       ATR Status   Running Programd  Reload Loc

-------------------------------------------------------------------------------------------------

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   ADMCONFIG            CURRENT    1.00    1.00       NOT REQ

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   BIOS             S   CURRENT    5.20    5.20         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   BIOS-Golden      BS  CURRENT            1.90         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   CpuFpga          S   CURRENT    1.06    1.06         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   CpuFpgaGolden    BS  CURRENT            1.02         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   SsdMicron5300    S   CURRENT    0.01    0.01         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   TamFw            S   CURRENT    9.07    9.07         0/RP0

0/RP0/CPU0 NCS1010-CTR2-B-K9     0.1   TamFwGolden      BS  CURRENT            9.06         0/RP0

0/PM0      NCS1K4-AC-PSU-2       1.0   PO-PriMCU            CURRENT    1.03    1.03       NOT REQ

0/PM0      NCS1K4-AC-PSU-2       1.0   PO-SecMCU            CURRENT    1.05    1.05       NOT REQ

0/PM1      NCS1K4-AC-PSU-2       1.0   PO-PriMCU            CURRENT    1.03    1.03       NOT REQ

0/PM1      NCS1K4-AC-PSU-2       1.0   PO-SecMCU            CURRENT    1.05    1.05       NOT REQ

0/0/NXR0   NCS1K-E-OLT-C         1.0   OLT              S   CURRENT    3.14    3.14       NOT REQ

0/2/NXR0   NCS1K14-CCMD-16-C     1.0   CpuModFw         S   CURRENT   42.15   42.15       NOT REQ

0/2/NXR0   NCS1K14-CCMD-16-C     1.0   OptModFw         S   CURRENT   20.02   20.02       NOT REQ

0/3/NXR0   NCS1K14-CCMD-16-C     1.0   CpuModFw         S   CURRENT   42.15   42.15       NOT REQ

0/3/NXR0   NCS1K14-CCMD-16-C     1.0   OptModFw         S   CURRENT   20.02   20.02       NOT REQ

0/Rack     NCS1020-SA            0.1   ADMCONFIG            CURRENT    1.00    1.00       NOT REQ

0/Rack     NCS1020-SA            0.1   IoFpgaLow        S   CURRENT    1.08    1.08       NOT REQ

0/Rack     NCS1020-SA            0.1   IoFpgaLowGolden  BS  CURRENT            0.07       NOT REQ

0/Rack     NCS1020-SA            0.1   IoFpgaUp         S   CURRENT    1.08    1.08       NOT REQ

0/Rack     NCS1020-SA            0.1   IoFpgaUpGolden   BS  CURRENT            0.06       NOT REQ

0/Rack     NCS1020-SA            0.1   SsdMicron5400    S   CURRENT    0.02    0.02        0/Rack

Step 2

show fpd package

Displays the FPD image version available with this software release for each hardware component.

Example:

RP/0/RP0/CPU0:ios#show fpd package 
Wed Apr 24 15:59:13.897 IST

=============================== ================================================
                                        Field Programmable Device Package
                                ================================================
                                               Req     SW      Min Req   Min Req
Card Type            FPD Description           Reload  Ver     SW Ver  Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
NCS1010-CTR2-B-K9    ADMCONFIG                  NO      1.00      1.00      0.1  
                     BIOS                       YES     5.20      5.20      0.0  
                     BIOS-Golden                YES     5.10      0.01      0.0  
                     CpuFpga                    YES     1.06      1.06      0.0  
                     CpuFpgaGolden              YES     1.02      0.01      0.0  
                     SsdIntelS4510              YES    11.32     11.32      0.0  
                     SsdMicron5300              YES     0.01      0.01      0.0  
                     SsdMicron5400              YES     0.02      0.02      0.0  
                     TamFw                      YES     9.07      9.07      0.0  
                     TamFwGolden                YES     9.06      0.01      0.0  
--------------------------------------------------------------------------------
NCS1010-CTR2-K9      ADMCONFIG                  NO      1.00      1.00      0.1  
                     BIOS                       YES     5.20      5.20      0.0  
                     BIOS-Golden                YES     5.10      0.01      0.0  
                     CpuFpga                    YES     1.06      1.06      0.0  
                     CpuFpgaGolden              YES     1.02      0.01      0.0  
                     SsdIntelS4510              YES    11.32     11.32      0.0  
                     SsdMicron5300              YES     0.01      0.01      0.0  
                     SsdMicron5400              YES     0.02      0.02      0.0  
                     TamFw                      YES     9.07      9.07      0.0  
                     TamFwGolden                YES     9.06      0.01      0.0  
--------------------------------------------------------------------------------
NCS1020-SA           ADMCONFIG                  NO      1.00      1.00      0.0  
                     IoFpgaLow                  NO      1.08      1.08      0.0  
                     IoFpgaLowGolden            NO      0.07      0.01      0.0  
                     IoFpgaUp                   NO      1.08      1.08      0.0  
                     IoFpgaUpGolden             NO      0.06      0.01      0.0  
                     SsdIntelSC2KB              YES     1.20      1.20      0.0  
                     SsdMicron5400              YES     0.02      0.02      0.0  
--------------------------------------------------------------------------------
NCS1K-E-ILA-2R-C     ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
                     Raman-2                    NO      3.14      3.14      0.1  
                     Raman-2                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-E-ILA-R-C      ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-E-ILA-R-C-2    ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
                     Raman-2                    NO      3.14      3.14      0.1  
                     Raman-2                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-E-OLT-C        OLT                        NO      3.14      3.14      0.1  
                     OLT                        NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-E-OLT-L        OLT                        NO      3.12      3.12      0.1  
--------------------------------------------------------------------------------
NCS1K-E-OLT-R-C      OLT                        NO      3.14      3.14      0.1  
                     OLT                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-ILA-2R-C       ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
                     Raman-2                    NO      3.14      3.14      0.1  
                     Raman-2                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-ILA-C          ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-ILA-L          ILA                        NO      3.12      3.12      0.1  
--------------------------------------------------------------------------------
NCS1K-ILA-R-C        ILA                        NO      3.14      3.14      0.1  
                     ILA                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-OLT-C          OLT                        NO      3.14      3.14      0.1  
                     OLT                        NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K-OLT-L          OLT                        NO      3.12      3.12      0.1  
--------------------------------------------------------------------------------
NCS1K-OLT-R-C        OLT                        NO      3.14      3.14      0.1  
                     OLT                        NO      0.28      0.28     99.1  
                     Raman-1                    NO      3.14      3.14      0.1  
                     Raman-1                    NO      0.28      0.28     99.1  
--------------------------------------------------------------------------------
NCS1K14-CCMD-16-C    CpuModFw                   NO     42.14     42.14      0.0  
                     OptModFw                   NO     20.02     20.02      0.0  
--------------------------------------------------------------------------------
NCS1K14-CCMD-16-L    CpuModFw                   NO     42.14     42.14      0.0  
                     OptModFw                   NO     20.02     20.02      0.0  
--------------------------------------------------------------------------------
NCS1K4-AC-PSU-2      PO-PriMCU                  NO      1.03      1.03      0.1  
                     PO-SecMCU                  NO      1.05      1.05      0.1

Verify Management Interface Status

To verify the management interface status, perform the following procedure.

Procedure

Step 1

show interfaces MgmtEth 0/RP0/CPU0/0

Displays the management interface configuration.

Example:

RP/0/RP0/CPU0:ios#show interfaces MgmtEth 0/RP0/CPU0/0
Wed May 25 11:49:18.118 UTC
MgmtEth0/RP0/CPU0/0 is up, line protocol is up 
  Interface state transitions: 1
  Hardware is Management Ethernet, address is 38fd.f866.0964 (bia 38fd.f866.0964)
  Internet address is 10.33.0.61/16
  MTU 1514 bytes, BW 1000000 Kbit (Max: 1000000 Kbit)
     reliability 255/255, txload 0/255, rxload 0/255
  Encapsulation ARPA,
  Full-duplex, 1000Mb/s, CX, link type is autonegotiation
  loopback not set,
  Last link flapped 15:05:21
  ARP type ARPA, ARP timeout 04:00:00
  Last input never, output 00:00:00
  Last clearing of "show interface" counters never
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     53138 packets input, 6636701 bytes, 0 total input drops
     0 drops for unrecognized upper-level protocol
     Received 12145 broadcast packets, 40082 multicast packets
              0 runts, 0 giants, 0 throttles, 0 parity
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     217288 packets output, 60964220 bytes, 0 total output drops
     Output 1 broadcast packets, 15 multicast packets
     0 output errors, 0 underruns, 0 applique, 0 resets
     0 output buffer failures, 0 output buffers swapped out
     1 carrier transitions

Step 2

show interfaces summary and show interfaces brief

Verifies the management interface status.

Example:

RP/0/RP0/CPU0:ios#show interfaces summary
Wed May 25 11:50:02.558 UTC
Interface Type          Total    UP       Down     Admin Down
--------------          -----    --       ----     ----------   
ALL TYPES                9        5         0          4       
--------------         
IFT_GETHERNET           1        1          0          0       
IFT_LOOPBACK            2        2          0          0       
IFT_ETHERNET            3        1          0          2       
IFT_NULL                1        1          0          0       
IFT_PTP_ETHERNET        2        0          0          2

Example:

RP/0/RP0/CPU0:ios#show interfaces brief
Wed May 25 11:50:28.438 UTC

               Intf     Intf        LineP              Encap         MTU        BW
               Name    State       State               Type        (byte)    (Kbps)
--------------------------------------------------------------------------------------------------------
                Lo0       up          up              Loopback       1500          0
                Lo3       up          up              Loopback       1500          0
                Nu0       up          up               Null           1500          0
          Gi0/0/0/0       up          up               ARPA           1514    1000000
         Mg0/RP0/CPU0/0    up          up               ARPA          1514    1000000
        Mg0/RP0/CPU0/1    admin-down  admin-down        ARPA  1514    1000000
        Mg0/RP0/CPU0/2    admin-down  admin-down        ARPA  1514    1000000
        PT0/RP0/CPU0/0    admin-down  admin-down        ARPA  1514    1000000
        PT0/RP0/CPU0/1    admin-down  admin-down        ARPA  1514    1000000

Example:

RP/0/RP0/CPU0:ios#show ipv4 interfaces brief
Tue Jul 12 07:32:42.390 UTC

Interface                      IP-Address      Status          Protocol Vrf-Name
Loopback0                      10.3.3.21        Up              Up       default 
Loopback3                      10.1.1.2        Up              Up       default 
GigabitEthernet0/0/0/0         10.7.1.20        Up              Up       default 
MgmtEth0/RP0/CPU0/0            10.4.33.63       Up              Up       default 
PTP0/RP0/CPU0/0                unassigned      Shutdown        Down     default 
MgmtEth0/RP0/CPU0/1            unassigned      Down            Down     default 
PTP0/RP0/CPU0/1                unassigned      Shutdown        Down     default 
MgmtEth0/RP0/CPU0/2            unassigned      Down            Down     default

Verify Alarms

You can view the alarm information using the show alarms command.

Procedure

show alarms [ brief [ card | rack | system ] [ location location ] [ active | history ] | detail [ card | rack | system ] [ location location ] [ active | clients | history | stats ] ]

Displays alarms in brief or detail.

Example:

RP/0/RP0/CPU0:ios#show alarms brief system active
 
Thu Apr 28 06:16:50.524 UTC

------------------------------------------------------------------------------------
Active Alarms 
------------------------------------------------------------------------------------
Location        Severity     Group            Set Time                   Description
------------------------------------------------------------------------------------
0/RP0/CPU0      Major        Ethernet         04/28/2022 06:03:39 UTC    RP-SW: SPI flash config is incorrect
0/PM0           Major        Environ          04/28/2022 06:03:50 UTC    Power Module Error (PM_VIN_VOLT_OOR)
0/PM0           Major        Environ          04/28/2022 06:03:50 UTC    Power Module Output Disabled (PM_OUTPUT_DISABLED)
0               Major        Environ          04/28/2022 06:03:50 UTC    Power Group redundancy lost
0/PM0           Major        FPD_Infra        04/28/2022 06:04:08 UTC    One Or More FPDs Need Upgrade Or Not In Current State
0/PM1           Major        FPD_Infra        04/28/2022 06:04:09 UTC    One Or More FPDs Need Upgrade Or Not In Current State
0/0             Minor        Environ          04/28/2022 06:04:10 UTC    ILAC_CT_1: Invalid sensor read error.
0/0             Minor        Environ          04/28/2022 06:04:10 UTC    ILAC_CT_2: Invalid sensor read error.
0/0             Minor        Environ          04/28/2022 06:04:10 UTC    ILAC_CT_3: Invalid sensor read error.
0/0             Minor        Environ          04/28/2022 06:04:10 UTC    ILAC_CT_4: Invalid sensor read error.
0/0             Major        Controller       04/28/2022 06:05:12 UTC    Osc0/0/0/0 - Provisioning Failed     
0/0             Major        Controller       04/28/2022 06:05:12 UTC    Osc0/0/0/2 - Provisioning Failed     
0/0             Major        Controller       04/28/2022 06:05:12 UTC    Ots0/0/0/0 - Provisioning Failed     
0/0             Major        Controller       04/28/2022 06:05:12 UTC    Ots0/0/0/2 - Provisioning Failed

Note

 
In the maintenance mode, all the alarms are moved from active to suppressed and the show alarms command does not display the alarms details.

Verify Environmental Parameters

The show environment command displays the environmental parameters of NCS 1020.

To verify that the environmental parameters are as expected, perform the following procedure.

Procedure

show environment [ all | current | fan | power | voltages[ location | location ] | temperature[ location | location ] ]

Displays the environmental parameters of NCS 1020.

Example:

The following example shows a sample output of the show environment command with the fan keyword. 

RP/0/RP0/CPU0:ios#show environment fan

Mon Apr 29 11:34:01.781 IST

===========================================================================

                                              Fan speed (rpm)

Location      FRU Type                        FAN_0    FAN_1   FAN_2  

---------------------------------------------------------------------------

 

0/FT0        NCS1010-FAN                        7860    7860    7860  

0/FT1        NCS1010-FAN                        7800    7740    7740  

0/FT4        NCS1020-FAN                        7740    7740  

0/FT5        NCS1020-FAN                        7740    7740  

0/FT6        NCS1020-FAN                        3960    3960  

0/FT7        NCS1020-FAN                        4020    3960  

0/PM0        NCS1K4-AC-PSU-2                    5632    5504  

0/PM1        NCS1K4-AC-PSU-2                    5536    5568

The following example shows a sample output of the show environment command with the temperatures keyword for 0/RP0 location. 

RP/0/RP0/CPU0:ios#show environment temperature location 0/RP0

Mon Apr 29 11:41:39.134 IST

=============================================================================================================

Location  TEMPERATURE                          Value     Crit    Major    Minor    Minor    Major    Crit

          Sensor                             (deg C)     (Lo)     (Lo)     (Lo)     (Hi)     (Hi)    (Hi)

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_TEMP_PCB                            22      -10       -5        0       80       85       90

          RP_TEMP_HOT_SPOT                       26      -10       -5        0       80       85       90

          RP_TEMP_LTM4638_0                      41      -10       -5        0       85       90       95

          RP_TEMP_LTM4644_0                      29      -10       -5        0       85       90       95

          RP_TEMP_LTM4644_1                      32      -10       -5        0       85       90       95

          TEMP_CPU_DIE                           29      -10       -5        0       80       85       90

          TEMP_DDR_DIMM                          25      -10       -5        0       80       85       90

          TEMP_CPU_SSD                           28      -10       -5        0       70       75       80

          TEMP_CHASSIS_SSD                       24      -10       -5        0       70       75       80

The following example shows a sample output of the show environment command with the temperatures keyword for 0/0/NXR0 location. 

RP/0/RP0/CPU0:ios#show environment temperature location 0/0/NXR0

Mon Apr 29 11:41:39.134 IST

=============================================================================================================

Location  TEMPERATURE                          Value     Crit    Major    Minor    Minor    Major    Crit

          Sensor                             (deg C)     (Lo)     (Lo)     (Lo)     (Hi)     (Hi)    (Hi)

-------------------------------------------------------------------------------------------------------------

0/0/NXR0  

          OLTC_LT_P0_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P0_iEDFA1                      25       17       18       19       31       32       33

          OLTC_LT_P0_iEDFA2                      25       17       18       19       31       32       33

          OLTC_LT_P2_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P3_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P0_eEDFA0                      24       17       18       19       31       32       33

          OLTC_CT_1                              23      -11       -8       -6       76       78       81

          OLTC_LT_P0_eEDFA1                      24       17       18       19       31       32       33

          OLTC_CT_2                              20      -11       -8       -6       71       74       76

          OLTC_CT_3                              22      -11       -8       -6       71       74       76

          OLTC_CT_4                              23      -11       -8       -6       71       74       76

          OLTC_FT_P0_iEDFA0                      59       54       56       57       63       65       66

          OLTC_FT_P2_iEDFA0                      59       54       56       57       63       65       66

          OLTC_FT_P3_iEDFA0                      59       54       56       57       63       65       66

          OLTC_FT_P0_eEDFA0                      59       54       56       57       63       65       66

The following example shows a sample output of the show environment command with the power keyword. 

RP/0/RP0/CPU0:ios#show environment power

Mon Apr 29 11:36:36.442 IST

================================================================================

CHASSIS LEVEL POWER INFO: 0

================================================================================

   Total output power capacity (Group 0 + Group 1) :    2500W +     2500W

   Total output power required                     :    1189W

   Total power input                               :     278W

   Total power output                              :     204W

 

Power Group 0:

================================================================================

   Power       Supply         ------Input----   ------Output---     Status

   Module      Type            Volts     Amps    Volts     Amps   

================================================================================

   0/PM0       NCS1K4-AC-PSU-2 232.0     0.6     12.1      9.5      OK

 

Total of Group 0:              139W/0.6A         114W/9.5A

 

Power Group 1:

================================================================================

   Power       Supply         ------Input----   ------Output---     Status

   Module      Type            Volts     Amps    Volts     Amps   

================================================================================

   0/PM1       NCS1K4-AC-PSU-2 231.8     0.6     12.1      7.5      OK

 

Total of Group 1:              139W/0.6A         90W/7.5A

 

================================================================================

   Location     Card Type               Power       Power        Status

                                        Allocated   Used

                                        Watts       Watts

================================================================================

   0/RP0/CPU0   NCS1010-CTR2-B-K9       70          16           ON

   0/FT0        NCS1010-FAN             110         9            ON

   0/FT1        NCS1010-FAN             110         9            ON

   0/FT2        -                       110         0            RESERVED

   0/FT3        -                       110         0            RESERVED

   0/FT4        NCS1020-FAN             73          6            ON

   0/FT5        NCS1020-FAN             73          6            ON

   0/FT6        NCS1020-FAN             73          3            ON

   0/FT7        NCS1020-FAN             73          1            ON

   0/0/NXR0     NCS1K-E-OLT-C           142         73           ON

   0/2/NXR0     NCS1K14-CCMD-16-C       100         17           ON

   0/3/NXR0     NCS1K14-CCMD-16-C       100         21           ON

   0/Rack       NCS1020-SA              45          18           ON

The following example shows a sample output of the show environment command with the voltages keyword. 

RP/0/RP0/CPU0:ios#show environment voltage location 0/RP0        

Mon Apr 29 11:40:53.949 IST

=============================================================================================================

Location  VOLTAGE                             Value      Crit    Minor    Minor     Crit

          Sensor                              (mV)       (Lo)    (Lo)     (Hi)      (Hi)

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_ADM1266_12V0                     12035    10800    11280    12720    13200

          RP_ADM1266_3V3_STANDBY               3314     3070     3200     3400     3530

          RP_ADM1266_5V0                       4993     4650     4850     5150     5350

          RP_ADM1266_3V3                       3325     3070     3200     3400     3530

          RP_ADM1266_2V5_PLL                   2522     2330     2430     2580     2680

          RP_ADM1266_2V5_FPGA                  2494     2330     2430     2580     2680

          RP_ADM1266_1V2_FPGA                  1204     1120     1160     1240     1280

          RP_ADM1266_3V3_CPU                   3336     3070     3200     3400     3530

          RP_ADM1266_2V5_CPU                   2509     2330     2430     2580     2680

          RP_ADM1266_1V8_CPU                   1803     1670     1750     1850     1930

          RP_ADM1266_1V24_VCCREF               1238     1150     1200     1280     1330

          RP_ADM1266_1V05_CPU                  1050      980     1020     1080     1120

          RP_ADM1266_1V2_DDR_VDDQ              1199     1120     1160     1240     1280

          RP_ADM1266_1V0_VCC_RAM               1106      650      700     1250     1300

          RP_ADM1266_1V0_VNN                    918      550      600     1250     1300

          RP_ADM1266_1V0_VCCP                  1153      450      500     1250     1300

          RP_ADM1266_0V6_DDR_VTT                602      560      580      620      640

The following example shows a sample output of the show environment command with the current keyword. 

RP/0/RP0/CPU0:ios#show environment current

Mon Apr 29 11:33:28.410 IST

=============================================================================================================

Location  CURRENT                              Value   

          Sensor                               (mA)   

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_CURRMON_LTM4638_0                  387

          RP_CURRMON_LTM4644_0                  171

          RP_CURRMON_LTM4644_1                  320

          RP_JMAC_1V0_VCCP_IMON                 125

          RP_JMAC_1V0_VNN_IMON                  125

          RP_JMAC_1V0_VCC_RAM_IMON                0

          RP_JMAC_1V2_DDR_VDDQ_IMON             156

0/2/NXR0  

          IMON_OPTM                            1167

          IMON_CTLPL                            521

0/3/NXR0  

          IMON_OPTM                            1242

          IMON_CTLPL                            525

0/Rack    

          SA_U_INA230_3V3_IMON                 2740

          SA_U_INA230_1V0_XGE_CORE_IMON        3295

          SA_U_INA230_1V0_POLLUX10_CORE         979

          SA_U_ADM1275_12V_EITU_IMON           1528

          SA_U_ADM1275_12V_CPU0_IMON           1398

          SA_U_ADM1275_12V_MOD0_IMON           5886

          SA_U_ADM1275_12V_MOD1_IMON             18

          SA_U_ADM1275_12V_MOD2_IMON             18

          SA_U_ADM1275_12V_LC2_IMON            1629

          SA_U_ADM1275_12V_LC3_IMON            1716

          SA_U_ADM1275_12V_LC4_IMON               6

          SA_U_ADM1275_12V_LC5_IMON              18

          SA_L_INA230_1V0_PROPUS10_CORE         942

          SA_L_INA230_5V_USB_IMON_A              99

          SA_L_INA230_5V_USB_IMON_B              97

          SA_L_ADM1275_12V_CPU1_IMON             13

          SA_L_ADM1275_12V_MOD3_IMON             51

          SA_L_ADM1275_12V_MOD4_IMON             18

          SA_L_ADM1275_12V_MOD5_IMON             18

          SA_L_ADM1275_12V_FAN0_IMON            799

          SA_L_ADM1275_12V_FAN1_IMON            762

          SA_L_ADM1275_12V_FAN2_IMON             43

          SA_L_ADM1275_12V_FAN3_IMON             18

          SA_L_ADM1275_12V_LC6_IMON               6

          SA_L_ADM1275_12V_LC7_IMON              30

          SA_L_ADM1275_12V_LC8_IMON               6

          SA_L_ADM1275_12V_LC9_IMON              30

          SA_L_ADM1275_12V_FAN4_0_IMON          294

          SA_L_ADM1275_12V_FAN4_1_IMON          288

          SA_L_ADM1275_12V_FAN5_0_IMON          319

          SA_L_ADM1275_12V_FAN5_1_IMON          362

          SA_L_ADM1275_12V_FAN6_0_IMON           96

          SA_L_ADM1275_12V_FAN6_1_IMON          114

          SA_L_ADM1275_12V_FAN7_0_IMON          145

          SA_L_ADM1275_12V_FAN7_1_IMON          127

The following example shows a sample output of the show environment command with the all keyword. 

RP/0/RP0/CPU0:ios#show environment all

Mon Apr 29 11:32:46.987 IST

=============================================================================================================

Location  TEMPERATURE                          Value     Crit    Major    Minor    Minor    Major    Crit

          Sensor                             (deg C)     (Lo)     (Lo)     (Lo)     (Hi)     (Hi)    (Hi)

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_TEMP_PCB                            22      -10       -5        0       80       85       90

          RP_TEMP_HOT_SPOT                       27      -10       -5        0       80       85       90

          RP_TEMP_LTM4638_0                      42      -10       -5        0       85       90       95

          RP_TEMP_LTM4644_0                      30      -10       -5        0       85       90       95

          RP_TEMP_LTM4644_1                      32      -10       -5        0       85       90       95

          TEMP_CPU_DIE                           29      -10       -5        0       80       85       90

          TEMP_DDR_DIMM                          25      -10       -5        0       80       85       90

          TEMP_CPU_SSD                           29      -10       -5        0       70       75       80

          TEMP_CHASSIS_SSD                       24      -10       -5        0       70       75       80

0/0/NXR0  

          OLTC_LT_P0_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P0_iEDFA1                      25       17       18       19       31       32       33

          OLTC_LT_P0_iEDFA2                      25       17       18       19       31       32       33

          OLTC_LT_P2_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P3_iEDFA0                      25       17       18       19       31       32       33

          OLTC_LT_P0_eEDFA0                      24       17       18       19       31       32       33

          OLTC_CT_1                              23      -11       -8       -6       76       78       81

          OLTC_LT_P0_eEDFA1                      24       17       18       19       31       32       33

          OLTC_CT_2                              20      -11       -8       -6       71       74       76

          OLTC_CT_3                              23      -11       -8       -6       71       74       76

          OLTC_CT_4                              23      -11       -8       -6       71       74       76

          OLTC_FT_P0_iEDFA0                      59       54       56       57       63       65       66

          OLTC_FT_P2_iEDFA0                      60       54       56       57       63       65       66

          OLTC_FT_P3_iEDFA0                      60       54       56       57       63       65       66

          OLTC_FT_P0_eEDFA0                      59       54       56       57       63       65       66

0/2/NXR0  

          TEMP_DX_PCB                            24      -10       -5        0       95      100      105

          TEMP_DX_ZYNQ                           27      -10       -5        0       95      100      105

0/3/NXR0  

          TEMP_DX_PCB                            23      -10       -5        0       95      100      105

          TEMP_DX_ZYNQ                           27      -10       -5        0       95      100      105

0/PM0     

          Air Inlet Temperature                  22      -10       -5        0       62       67       72

          Air Outlet Temperature                 24      -10       -5        0       82       87       92

          Oring MOSFET                           29      -10       -5        0       77       82       87

0/PM1     

          Air Inlet Temperature                  24      -10       -5        0       62       67       72

          Air Outlet Temperature                 25      -10       -5        0       82       87       92

          Oring MOSFET                           30      -10       -5        0       77       82       87

0/Rack    

          SA_U_TMP421_EITU_PCB_HOTSPOT0          28      -10       -5        0       80       85       90

          SA_U_TMP421_EITU_PCB_HOTSPOT1          37      -10       -5        0       80       85       90

          SA_U_TMP421_EITU_PCB_HOTSPOT2          30      -10       -5        0       80       85       90

          SA_U_TMP421_EITU_PCB_HOTSPOT3          34      -10       -5        0       80       85       90

          SA_L_TMP421_CHASSIS_INLET0             20      -10       -5        0       45       55       60

          SA_L_TMP421_CHASSIS_EXHAUST0           22      -10       -5        0       75       85       90

          SA_L_TMP421_CHASSIS_EXHAUST1           24      -10       -5        0       75       85       90

          SA_L_TMP421_CHASSIS_EXHAUST2           22      -10       -5        0       75       85       90

          SA_L_TMP421_CHASSIS_EXHAUST3           21      -10       -5        0       75       85       90

          SA_L_TMP421_CHASSIS_EXHAUST4           23      -10       -5        0       75       85       90

          SA_L_TMP421_CHASSIS_EXHAUST5           22      -10       -5        0       75       85       90

=============================================================================================================

Location  VOLTAGE                             Value      Crit    Minor    Minor     Crit

          Sensor                              (mV)       (Lo)    (Lo)     (Hi)      (Hi)

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_ADM1266_12V0                     12035    10800    11280    12720    13200

          RP_ADM1266_3V3_STANDBY               3314     3070     3200     3400     3530

          RP_ADM1266_5V0                       4993     4650     4850     5150     5350

          RP_ADM1266_3V3                       3325     3070     3200     3400     3530

          RP_ADM1266_2V5_PLL                   2522     2330     2430     2580     2680

          RP_ADM1266_2V5_FPGA                  2494     2330     2430     2580     2680

          RP_ADM1266_1V2_FPGA                  1204     1120     1160     1240     1280

          RP_ADM1266_3V3_CPU                   3336     3070     3200     3400     3530

          RP_ADM1266_2V5_CPU                   2509     2330     2430     2580     2680

          RP_ADM1266_1V8_CPU                   1803     1670     1750     1850     1930

          RP_ADM1266_1V24_VCCREF               1238     1150     1200     1280     1330

          RP_ADM1266_1V05_CPU                  1050      980     1020     1080     1120

          RP_ADM1266_1V2_DDR_VDDQ              1199     1120     1160     1240     1280

          RP_ADM1266_1V0_VCC_RAM               1103      650      700     1250     1300

          RP_ADM1266_1V0_VNN                    918      550      600     1250     1300

          RP_ADM1266_1V0_VCCP                  1154      450      500     1250     1300

          RP_ADM1266_0V6_DDR_VTT                598      560      580      620      640

0/2/NXR0  

          VIN_5_0V                             5023     4500     4750     5250     5500

          VAUX_3_3V_ST                         3317     3053     3135     3465     3548

          VIN_12_0V                           12066    10800    11400    12600    13200

          VMON_3_3V                            3298     3135     3201     3399     3465

          VMON_1_8V_MGT                        1796     1710     1746     1854     1890

          VMON_1_8V                            1799     1710     1746     1854     1890

          VMON_1_2V                            1200     1140     1164     1236     1260

          VMON_2_5V                            2489     2357     2425     2575     2625

          VMON_0_85V_MGT                        852      808      825      876      893

          VMON_0_85V                            849      808      825      876      893

0/3/NXR0  

          VIN_5_0V                             5003     4500     4750     5250     5500

          VAUX_3_3V_ST                         3313     3053     3135     3465     3548

          VIN_12_0V                           12051    10800    11400    12600    13200

          VMON_3_3V                            3292     3135     3201     3399     3465

          VMON_1_8V_MGT                        1799     1710     1746     1854     1890

          VMON_1_8V                            1796     1710     1746     1854     1890

          VMON_1_2V                            1202     1140     1164     1236     1260

          VMON_2_5V                            2500     2357     2425     2575     2625

          VMON_0_85V_MGT                        853      808      825      876      893

          VMON_0_85V                            849      808      825      876      893

0/Rack    

          SA_U_ADM1266_12V_BUS_EITU           12042    10800    11280    12720    13200

          SA_U_ADM1266_2V5                     2498     2325     2400     2600     2675

          SA_U_ADM1266_3V3                     3308     3069     3168     3432     3531

          SA_U_ADM1266_3V3_STANDBY             3297     3069     3168     3432     3531

          SA_U_ADM1266_1V2_PROPUS10_FPGA       1203     1116     1152     1248     1284

          SA_U_ADM1266_1V0_PROPUS10_FPGA       1008      930      960     1040     1070

          SA_U_ADM1266_5V0_USB_A               5085     4650     4800     5200     5350

          SA_U_ADM1266_5V0_USB_B               5070     4650     4800     5200     5350

          SA_U_ADM1275_12V_EITU               12048    10800    11280    12720    13200

          SA_U_ADM1275_12V_CPU0               12027    10800    11280    12720    13200

          SA_U_ADM1275_12V_MOD0               12048    10800    11280    12720    13200

          SA_U_ADM1266_5V0                     4998     4650     4800     5200     5350

          SA_U_ADM1275_12V_MOD1                   -    10800    11280    12720    13200

          SA_U_ADM1275_12V_MOD2                   -    10800    11280    12720    13200

          SA_U_ADM1275_12V_LC2                12042    10800    11280    12720    13200

          SA_U_ADM1275_12V_LC3                12037    10800    11280    12720    13200

          SA_U_ADM1275_12V_LC4                    -    10800    11280    12720    13200

          SA_U_ADM1275_12V_LC5                    -    10800    11280    12720    13200

          SA_U_ADM1266_1V8_ZARLINK_DPLL        1799     1674     1728     1872     1926

          SA_U_ADM1266_1V0_PHY                 1009      930      960     1040     1070

          SA_L_ADM1275_12V_CPU1                   -    10800    11280    12720    13200

          SA_L_ADM1275_12V_MOD3                   -    10800    11280    12720    13200

          SA_L_ADM1275_12V_MOD4                   -    10800    11280    12720    13200

          SA_L_ADM1275_12V_MOD5                   -    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN0               12027    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN1               12032    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN2                   -    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN3                   -    10800    11280    12720    13200

          SA_U_ADM1266_1V0_ALDRIN_CORE          983      910      930     1070     1090

          SA_L_ADM1275_12V_LC6                    -    10800    11280    12720    13200

          SA_L_ADM1275_12V_LC7                    -    10800    11280    12720    13200

          SA_L_ADM1275_12V_LC8                    -    10800    11280    12720    13200

          SA_L_ADM1275_12V_LC9                    -    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN4_0             12027    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN4_1             12037    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN5_0             12058    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN5_1             12017    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN6_0             12058    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN6_1             12037    10800    11280    12720    13200

          SA_U_ADM1266_1V0_ALDRIN_SERDES       1008      930      960     1040     1070

          SA_L_ADM1275_12V_FAN7_0             12032    10800    11280    12720    13200

          SA_L_ADM1275_12V_FAN7_1             12058    10800    11280    12720    13200

          SA_U_ADM1266_1V0_POLLUX10_FPGA       1006      930      960     1040     1070

          SA_U_ADM1266_1V2_POLLUX10_FPGA       1203     1116     1152     1248     1284

          SA_U_ADM1266_1V8                     1806     1674     1728     1872     1926

=============================================================================================================

Location  CURRENT                              Value   

          Sensor                               (mA)   

-------------------------------------------------------------------------------------------------------------

0/RP0/CPU0

          RP_CURRMON_LTM4638_0                  387

          RP_CURRMON_LTM4644_0                  171

          RP_CURRMON_LTM4644_1                  320

          RP_JMAC_1V0_VCCP_IMON                 187

          RP_JMAC_1V0_VNN_IMON                  125

          RP_JMAC_1V0_VCC_RAM_IMON                0

          RP_JMAC_1V2_DDR_VDDQ_IMON             156

0/2/NXR0  

          IMON_OPTM                            1209

          IMON_CTLPL                            521

0/3/NXR0  

          IMON_OPTM                            1234

          IMON_CTLPL                            525

0/Rack    

          SA_U_INA230_3V3_IMON                 2680

          SA_U_INA230_1V0_XGE_CORE_IMON        3295

          SA_U_INA230_1V0_POLLUX10_CORE         979

          SA_U_ADM1275_12V_EITU_IMON           1528

          SA_U_ADM1275_12V_CPU0_IMON           1417

          SA_U_ADM1275_12V_MOD0_IMON           6773

          SA_U_ADM1275_12V_MOD1_IMON             43

          SA_U_ADM1275_12V_MOD2_IMON             55

          SA_U_ADM1275_12V_LC2_IMON            1666

          SA_U_ADM1275_12V_LC3_IMON            1679

          SA_U_ADM1275_12V_LC4_IMON              43

          SA_U_ADM1275_12V_LC5_IMON              43

          SA_L_INA230_1V0_PROPUS10_CORE         942

          SA_L_INA230_5V_USB_IMON_A              99

          SA_L_INA230_5V_USB_IMON_B              97

          SA_L_ADM1275_12V_CPU1_IMON             13

          SA_L_ADM1275_12V_MOD3_IMON            113

          SA_L_ADM1275_12V_MOD4_IMON             30

          SA_L_ADM1275_12V_MOD5_IMON             18

          SA_L_ADM1275_12V_FAN0_IMON            836

          SA_L_ADM1275_12V_FAN1_IMON            836

          SA_L_ADM1275_12V_FAN2_IMON             43

          SA_L_ADM1275_12V_FAN3_IMON             55

          SA_L_ADM1275_12V_LC6_IMON              43

          SA_L_ADM1275_12V_LC7_IMON              18

          SA_L_ADM1275_12V_LC8_IMON               6

          SA_L_ADM1275_12V_LC9_IMON              80

          SA_L_ADM1275_12V_FAN4_0_IMON          281

          SA_L_ADM1275_12V_FAN4_1_IMON          281

          SA_L_ADM1275_12V_FAN5_0_IMON          263

          SA_L_ADM1275_12V_FAN5_1_IMON          331

          SA_L_ADM1275_12V_FAN6_0_IMON          114

          SA_L_ADM1275_12V_FAN6_1_IMON          114

          SA_L_ADM1275_12V_FAN7_0_IMON          120

          SA_L_ADM1275_12V_FAN7_1_IMON           52

===========================================================================

                                              Fan speed (rpm)

Location      FRU Type                        FAN_0    FAN_1   FAN_2  

---------------------------------------------------------------------------

 

0/FT0        NCS1010-FAN                        7860    7920    7860  

0/FT1        NCS1010-FAN                        7800    7740    7800  

0/FT4        NCS1020-FAN                        7800    7740  

0/FT5        NCS1020-FAN                        7800    7740  

0/FT6        NCS1020-FAN                        3960    3960  

0/FT7        NCS1020-FAN                        4020    3960  

0/PM0        NCS1K4-AC-PSU-2                    5504    5504  

0/PM1        NCS1K4-AC-PSU-2                    5536    5600  

================================================================================

Location     Altitude Value (Meters)    Source        

--------------------------------------------------------------------------------

0                   0                    config

 

================================================================================

CHASSIS LEVEL POWER INFO: 0

================================================================================

   Total output power capacity (Group 0 + Group 1) :    2500W +     2500W

   Total output power required                     :    1189W

   Total power input                               :     278W

   Total power output                              :     206W

 

Power Group 0:

================================================================================

   Power       Supply         ------Input----   ------Output---     Status

   Module      Type            Volts     Amps    Volts     Amps   

================================================================================

   0/PM0       NCS1K4-AC-PSU-2 232.0     0.6     12.1      9.6      OK

 

Total of Group 0:              139W/0.6A         116W/9.6A

 

Power Group 1:

================================================================================

   Power       Supply         ------Input----   ------Output---     Status

   Module      Type            Volts     Amps    Volts     Amps   

================================================================================

   0/PM1       NCS1K4-AC-PSU-2 231.8     0.6     12.1      7.5      OK

 

Total of Group 1:              139W/0.6A         90W/7.5A

 

================================================================================

   Location     Card Type               Power       Power        Status

                                        Allocated   Used

                                        Watts       Watts

================================================================================

   0/RP0/CPU0   NCS1010-CTR2-B-K9       70          17           ON

   0/FT0        NCS1010-FAN             110         10           ON

   0/FT1        NCS1010-FAN             110         10           ON

   0/FT2        -                       110         0            RESERVED

   0/FT3        -                       110         0            RESERVED

   0/FT4        NCS1020-FAN             73          6            ON

   0/FT5        NCS1020-FAN             73          7            ON

   0/FT6        NCS1020-FAN             73          2            ON

   0/FT7        NCS1020-FAN             73          2            ON

   0/0/NXR0     NCS1K-E-OLT-C           142         81           ON

   0/2/NXR0     NCS1K14-CCMD-16-C       100         20           ON

   0/3/NXR0     NCS1K14-CCMD-16-C       100         20           ON

   0/Rack       NCS1020-SA              45          18           ON

Environment parameter anomalies are logged in the syslog. As a result, if an environment parameter that is displayed in the show environment command output is not as expected, check the syslog using the show logging and show alarms brief system active command. The syslog provides details on any logged problems.

Verify Context

The show context command displays core dump context information of NCS 1020. Core dump is a result of abnormal exit of any process running in the system.

Procedure

show context

Displays the core dump context information of NCS 1020.

Example:

RP/0/RP0/CPU0:ios# show context
Mon Sep 27 17:21:59.219 UTC

node: node0_RP0_CPU0
----------------------------------------------------------------
No context

The command output is empty during system upgrade.

Verify Core Files

Use the run command to go to the hard disk location and check for the core dumps of NCS 1020.

Procedure

run

Example:

RP/0/RP0/CPU0:ios# run
Mon Sep 27 17:29:11.163 UTC
[xr-vm_node0_RP0_CPU0:~]$cd /misc/disk1/
[xr-vm_node0_RP0_CPU0:/misc/disk1]$ls -ltr *.gz

Verify Memory Information

You can view the memory information using the show watchdog memory-state command.

Procedure

show watchdog memory-state location all

Displays memory snapshot in brief.

Example:

RP/0/RP0/CPU0:ios#show watchdog memory-state location all
Thu Jun 16 08:36:44.436 UTC
---- node0_RP0_CPU0 ----
Memory information:
    Physical Memory     : 31935.167 MB
    Free Memory         : 29236.0   MB
    Memory State        :   Normal