The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The NCS1K14-2.4T-K9 card is a single slot line card. The card is equipped with six QSFPDD and two CIM-8 ports. This chapter briefs the detail configurations, client and trunk optics, supported OpenConfig models for the NCS1K14-2.4T-K9 card.
The NCS1K14-2.4T-K9 card is a single slot line card. The card is equipped with six QSFPDD and two CIM-8 ports. You can configure six QSFPDD ports as client and two CIM-8 as trunk.
The NCS1K14-2.4T-K9 card supports both transponder (TXP) and muxponder(MXP) configuration and they can coexist on the same line card.
The NCS1K14-2.4T-K9 card supports the following Operational modes, client and trunk optics, and OpenConfig models:
The following table provides information for Operational modes, config in SliceMode, Slice 0 Client, and Slice 1 Client:
|
Operational modes |
Config in SliceMode |
Slice 0 Client |
Slice 1 Client |
|---|---|---|---|
|
400G |
4X100GE |
1 |
4 |
|
600G |
400GE+2x100GE |
1,2 |
4,5 |
|
800G |
2x400GE |
1,2 |
4,5 |
|
1000G |
2x400GE+2x100GE |
1,2,3 |
4,5,6 |
The following table provides information about PIDs, and related interface, transmit power, transmit wavelength, fiber type, fiber connector, and distance support:
|
PID |
Interface |
Transmit power |
Transmit wavelength |
Fiber type |
Fiber connector |
Distance support |
Description |
|---|---|---|---|---|---|---|---|
|
QDD-400G-FR4-S |
400GE |
-7.0 to +6.0 dbm per wavelength |
1310 nm |
Duplex SMF |
Duplex LC connector |
2km |
Only be used as 400GE non-breakout mode |
|
QDD-400G-DR4-S |
400GBASE-DR4 |
-10.1 to +4.0 dbm per wavelength |
1310 nm |
MPO-12 parallel SMF |
12-fiber MPO |
500m |
Can be used as 4x100GE breakout mode |
|
QDD-400G-AOCxM |
400GBASE-AOC |
-10.1 to +4.0 dbm per wavelength |
850 nm |
MMF |
AOC |
1, 2, 3, 5, 7, 10, 15, 20, 25, and 30 meters |
Only be used as 400GE non-breakout mode |
|
QDD-4X100G-LR-S |
10Base-LR |
–8.2 to +0.5 per wavelength |
1310nm |
G.652 micron SMF |
12-fiber MPO |
10km |
Can be used in 4x100GE breakout mode as well as 400GE non-breakout mode. |
 Note |
The transceiver name appears in the new format "Optics rack/slot/instance/port" from release 7.11.1. |
The following table provides information for PIDs, it's related payloads, trunk ports, and inventory details:
|
PID |
Payload |
Trunk Port Number |
Inventory Details |
|---|---|---|---|
|
CIM8-C-K9 |
400G, 600G, 800G, and 1000G |
0, and 7 |
|
The NCS1K14-2.4T-K9 card supports the following OpenConfig models:
|
Model |
Feature |
|---|---|
|
openconfig-platform.yang |
Inventory and LCMode |
|
openconfig-platform-transceiver.yang |
Pluggable Inventory and Operational Data |
|
openconfig-terminal-device.yang |
Logical and Optical Channels – Datapath and OperData |
|
openconfig-interface.yang |
Optical Interface Enable/Disable (shut/no-shut) |
|
openconfig-system.yang ( augumented with openconfig-alarms) |
Alarms |
|
openconfig/gnoi/os.proto |
Software Upgrade |
|
Openconfig/gnoi/diag.proto |
PRBS Testing |
The following table provides standard operational-modes for configuring the baud rate:
|
Mode |
FEC |
Baud-Rate |
Description |
|---|---|---|---|
|
4201 |
SD_15 |
138.000000 |
SoftDecision_FEC15:Baud_138.00000000 |
|
4202 |
SD_15 |
139.000000 |
SoftDecision_FEC15:Baud_139.00000000 |
|
4203 |
SD_15 |
140.000000 |
SoftDecision_FEC15:Baud_140.00000000 |
|
4204 |
SD_15 |
141.000000 |
SoftDecision_FEC15:Baud_141.00000000 |
|
4205 |
SD_15 |
142.000000 |
SoftDecision_FEC15:Baud_142.00000000 |
|
4206 |
SD_15 |
100.000000 |
SoftDecision_FEC15:Baud_100.00000000 |
|
4207 |
SD_15 |
80.000000 |
SoftDecision_FEC15:Baud_80.00000000 |
|
4208 |
SD_15 |
88.000000 |
SoftDecision_FEC15:Baud_88.00000000 |
|
4209 |
SD_15 |
98.000000 |
SoftDecision_FEC15:Baud_98.00000000 |
|
4210 |
SD_15 |
108.000000 |
SoftDecision_FEC15:Baud_108.00000000 |
|
4211 |
SD_15 |
118.000000 |
SoftDecision_FEC15:Baud_118.00000000 |
|
4212 |
SD_15 |
128.000000 |
SoftDecision_FEC15:Baud_128.00000000 |
|
4213 |
SD_15 |
110.000000 |
SoftDecision_FEC15:Baud_110.00000000 |
|
4214 |
SD_15 |
111.000000 |
SoftDecision_FEC15:Baud_111.00000000 |
|
4215 |
SD_15 |
112.000000 |
SoftDecision_FEC15:Baud_112.00000000 |
|
4216 |
SD_15 |
113.000000 |
SoftDecision_FEC15:Baud_113.00000000 |
|
4217 |
SD_15 |
114.000000 |
SoftDecision_FEC15:Baud_114.00000000 |
|
4218 |
SD_15 |
115.000000 |
SoftDecision_FEC15:Baud_115.00000000 |
You can use the extended terminal-device baud rate to set a new baud rate value compared to the value provided in the Standard Operational Mode table.
Note |
The Optical Channel name appears in the new format "OpticalChannel rack/slot/instance/port" from release 7.11.1. |
----------------------------------
Edit config baud-rate
----------------------------------
<edit-config>
<target>
<candidate/>
</target>
<config>
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OpticalChannel0/0/0/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<extended xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-openconfig-terminal-device-ext">
<config>
<baud-rate>15.1234567</baud-rate>
</config>
</extended>
</optical-channel>
</component>
</components>
</config>
</edit-config>Note |
If both the operating mode and extended baud rate exist, the line card employs the extended baud rate value. |
The extended transceiver model provides you with the Forward Error Correction (FEC) information for individual physical-channels.
Sample Configuration:
"Optics0/1/0/8": {
"openconfig-platform-transceiver:transceiver": {
"physical-channels": {
"channel": {
"1": {
"state": {
"index": 1,
"input-power": {
"avg": 1.64,
"instant": 1.6,
"interval": 10000000000,
"max": 1.72,
"max-time": 1649788692425519767,
"min": 1.59,
"min-time": 1649788694425593293
},
"laser-bias-current": {
"avg": 800,
"instant": 800,
"interval": 10000000000,
"max": 800,
"max-time": 1649788690426089532,
"min": 800,
"min-time": 1649788690426089532
},
"output-frequency": 228849200,
"output-power": {
"avg": 1.62,
"instant": 1.61,
"interval": 10000000000,
"max": 1.62,
"max-time": 1649788690426089532,
"min": 1.62,
"min-time": 1649788690426089532
}
},
"extended": {
"state": {
index: 1
"fec-mode": "openconfig-platform-types:FEC_ENABLED",
"fec-uncorrectable-words": 0,
“fec-corrected-words”:0
}
}
}
}
}
}
}
The following table explains the different commands that are used for 100G and 400GE client ports.
|
Client Port |
Logical Channel |
Trunk ODU |
Coherent DSP |
Optical Channel |
|---|---|---|---|---|
|
100G |
|
|
|
|
|
400GE |
|
|
|
|
Note |
Trunk payload rate determines the Trib rate. |
{
"openconfig-terminal-device:terminal-device": {
"logical-channels": {
"channel": [
{
"index": 101,
"config": {
"index": 101,
"rate-class": "openconfig-transport-types:TRIB_RATE_400G",
"admin-state": "ENABLED",
"description": "Client Logical Channel",
"trib-protocol": "openconfig-transport-types:PROT_400GE",
"logical-channel-type": "openconfig-transport-types:PROT_ETHERNET"
},
"ingress": {
"config": {
"transceiver": "Optics0/1/0/1"
}
},
"logical-channel-assignments": {
"assignment": [
{
"index": 1,
"config": {
"index": 1,
"allocation": "400",
"assignment-type": "LOGICAL_CHANNEL",
"description": "logical to logical assignemnt",
"logical-channel": 111
}
}
]
}
},
{
"index": 111,
"config": {
"index": 111,
"rate-class": "openconfig-transport-types:TRIB_RATE_400G",
"admin-state": "ENABLED",
"description": "Trunk-side-ODU",
"trib-protocol": "openconfig-transport-types:PROT_ODUFLEX_CBR",
"logical-channel-type": "openconfig-transport-types:PROT_OTN"
},
"logical-channel-assignments": {
"assignment": [
{
"index": 1,
"config": {
"index": 1,
"allocation": "400",
"assignment-type": "LOGICAL_CHANNEL",
"description": "logical to Logical",
"logical-channel": 30000
}
}
]
}
},
{
"index": 201,
"config": {
"index": 201,
"rate-class": "openconfig-transport-types:TRIB_RATE_400G",
"admin-state": "ENABLED",
"description": "Client Logical Channel",
"trib-protocol": "openconfig-transport-types:PROT_400GE",
"logical-channel-type": "openconfig-transport-types:PROT_ETHERNET"
},
"ingress": {
"config": {
"transceiver": "Optics0/1/0/2"
}
},
"logical-channel-assignments": {
"assignment": [
{
"index": 1,
"config": {
"index": 1,
"allocation": "400",
"assignment-type": "LOGICAL_CHANNEL",
"description": "logical to logical assignemnt",
"logical-channel": 211
}
}
]
}
},
{
"index": 211,
"config": {
"index": 211,
"rate-class": "openconfig-transport-types:TRIB_RATE_400G",
"admin-state": "ENABLED",
"description": "Trunk-side-ODU",
"trib-protocol": "openconfig-transport-types:PROT_ODUFLEX_CBR",
"logical-channel-type": "openconfig-transport-types:PROT_OTN"
},
"logical-channel-assignments": {
"assignment": [
{
"index": 1,
"config": {
"index": 1,
"allocation": "400",
"assignment-type": "LOGICAL_CHANNEL",
"description": "logical to Logical",
"logical-channel": 30000
}
}
]
}
},
{
"index": 30000,
"config": {
"index": 30000,
"admin-state": "ENABLED",
"description": "Coherent DSP",
"logical-channel-type": "openconfig-transport-types:PROT_OTN"
},
"logical-channel-assignments": {
"assignment": [
{
"index": 1,
"config": {
"index": 1,
"allocation": "800",
"assignment-type": "OPTICAL_CHANNEL",
"description": "logical to optical",
"optical-channel": "OpticalChannel0/1/0/0"
}
}
]
}
}
]
}
},
"openconfig-platform:components": {
"component": [
{
"name": "OpticalChannel0/1/0/0",
"openconfig-terminal-device:optical-channel": {
"config": {
"line-port": "Optics0/1/0/0"
}
}
}
]
},
"openconfig-interfaces:interfaces": {
"interface": [
{
"name": "Optics0/1/0/0",
"config": {
"name": "Optics0/1/0/0",
"type": "iana-if-type:opticalChannel",
"description": "T0",
"enabled": "true"
}
}
]
}
}
Feedback