About this Manual



Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.


This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.

This section provides the following information:

Revision History

Document Objectives

Audience

Document Organization

Related Documentation

Document Conventions

Obtaining Optical Networking Information

Obtaining Documentation and Submitting a Service Request

Revision History

Date
Notes

March 2007

Revision History Table added for the first time.

Changed fuse rating and power consumption specifications in Appendix A.

September 2007

Updated transmitter and receiver power range for SFP, ONS-SE-4G-SM, in Appendix A.

October 2007

Updated the trunk and client side specifications in Appendix A, Hardware Specifications. Updated receiver power range for SFP, ONS-SE-4G-SM, in Appendix A, Hardware Specifications.

November 2007

Added replacement SFPs for the EOL/EOS SFPs in Chapter 2, CardReference and Appendix A, Hardware Specification.

April 2008

Corrected applicable slot number for the TXP_MR_10E Card in Section 2.9.2 TXP_MR_10E Card.

May 2008

Added power-level LED information for TCC2 and TCC2P cards in Chapter 2, Card Reference.

June 2008

Added a note in the Key Features section of MXP_MR_10DME_C and MXP_MR_10DME_L Cards in Chapter 2, Card Reference.

July 2008

Updated Table B-8 in Appendix B, Administrative and Service States.

Deleted the note in the ONS 15454 ANSI Power and Ground section in
Chapter 1, Shelf Assembly Hardware.

September 2008

Added a note in Card Default Settings and Node Default Settings section of Appendix C, Network Element Defaults.

Updated the Hub Node section in Chapter 3, Node Reference.

October 2008

Added a reference to "CTC Port Numbers and TL1 Aids" section of TL1 Command Guide, in the Power Monitoring sections of the Chapter 2, Card Reference.

December 2008

Added a note in the "Y-Cable Protection" section of Chapter 2, CardReference.

April 2009

Added a note in the section "Automatic Power Reduction" of chapter 4, "Network Reference".

August 2009

Added details on how the throughput of the MXP_MR_10DME_C and MXP_MR_10DME_L cards is affected in Chapter 2, Card Reference.

November 2009

Updated the table "2R and 3R Mode and ITU-T G.709 Compliance by Client Interface" in Chapter , Card Reference.

Updated the table "Card View Tabs and Subtabs" in Chapter, Cisco Transport Controller Operation.

February 2010

Changed the BIEC parameter to BIT-EC in Chapter, "Performance Monitoring".

March 2010

Updated the table "Multimode Fiber SFP Port Cabling Specifications" in the appendix "Hardware Specifications".

April 2010

Updated the section "SNMP Overview" in the chapter "SNMP".

June 2010

Updated the table "ONS 15454 Security Levels—Node View" in the chapter "Security Reference".

November 2010

Updated the section, "SNMP in Multishelf Management" in the chapter, SNMP.

Updated the width of the single slot cards for Control cards and Transponder and Muxponder Cards in the appendix, "Hardware Specifications".

Updated the tables "SFP Specifications" and "Single-Mode Fiber SFP Port Cabling Specifications" in the appendix, "Hardware Specifications".

January 2011

Updated the width of all the cards in the appendix, "Hardware Specifications".

April 2011

Updated the power values in the "Individual Card Power Requirements" table in the appendix, "Hardware Specifications".

May 2011

Updated the section "SFP and XFP Modules" in the chapter "Card Reference".

Removed the sections "SFP Specifications" and "XFP Specifications" and added the section "SFP and XFP Specifications" in the appendix "Hardware Specifications".

June 2011

Updated the section "AIC-I Card" in the chapter "Card Reference".

July 2011

Added a note in the "PC and UNIX Workstation Requirements" section of Chapter, "Cisco Transport Controller Operation".

September 2011

Replaced G.975.1 with G.975.1 I.7 and added a note in the "Enhanced FEC (E-FEC) Feature" section in the chapter, "Card Reference".

Created a "Summary Pane" section in the chapter, "Cisco Transport Controller Operation".

October 2011

Removed the Temperature table and updated the Temperature section with standard operating values. Removed the temperature and humidity values from all the 15454 card specifications.

Updated the figure "Scenario 3: Using Proxy ARP with Static Routing (ANSI and ETSI)" in the chapter "Management Network Connectivity".

December 2011

Updated the power values in the table "Individual Card Power Requirements" in the appendix "Hardware Specifications".

Updated the section "Termination Modes" in the chapter "Card Reference".

April 2012

Upadted the section "SNMP in Multishelf Management" in the chapter "SNMP".

May 2012

Updated the section "Optical Channel Circuits" in the chapter "Network Reference".

June 2012

Updated the section "Generic Threshold and Performance Monitoring MIBs" in the chapter "SNMP".

Document Part Number revisioned to OL-9219-02 and a full length book-PDF was generated.

August 2012

Updated the power values in the table "Individual Card Power Requirements" in the appendix "Hardware Specifications".

October 2012

Added a caution to the section, "IP Addressing with Secure Mode Enabled" in the chapter, "Management Network Connectivity".

December 2012

Renamed chapter "Management Network Connectivity" to "Manage Network Connectivity".

April 2013

Updated the section "External Firewalls" in the chapter "Manage Network Connectivity".

June 2013

Updated the section "Adminstrative States" in the chapter "Administrative and Service States".


Document Objectives

This document explains installation, turn up, provisioning, and maintenance for Cisco ONS 15454 dense wavelength division (DWDM) systems. Use this document in conjunction with the appropriate publications listed in the Related Documentation section.

Audience

To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.

Document Organization

The Cisco ONS 15454 DWDM Reference Manual is organized into the following chapters:

Chapter 1 "Shelf Assembly Hardware" includes descriptions of the rack, backplane, FMECs, ferrites, power and ground, fan-tray assembly, air filter, card slots, cables, cable connectors, and cable routing.

Chapter 2 "Card Reference" provides descriptions of the common control, transponder/muxponder, and DWDM cards as well as small-form factor pluggables (SFPs).

Chapter 3 "Node Reference" explains the ONS 15454DWDM node types that are available for the ONS 15454. The chapter also explains the DWDM automatic power control, ROADM power equalization, span loss verification, and automatic node setup functions.

Chapter 4 "Network Reference" explains the ONS 15454 DWDM network applications and topologies.

Chapter 5 "Cisco Transport Controller Operation" includes information about CTC installation, the CTC window, computer requirements, software versions, and database reset and revert.

Chapter 6 "Security Reference" describes user security, security privileges and policies, the audit trail, and RADIUS authentication.

Chapter 7 "Timing Reference" describes node and network timing.

Chapter 8 "Manage Network Connectivity" includes Open System Interconnection (OSI) protocol suites, IP addressing scenarios, and information about provisionable patchcords, open GNE, and external firewalls.

Chapter 9 "Alarm and TCA Monitoring and Management" describes CTC alarm management and threshold crossing alerts (TCAs).

Chapter 10 "Performance Monitoring" lists the PM paramters for all DWDM, TXP, and MXP cards.

Chapter 11 "SNMP" describes simple network management protocol (SNMP) as it applies to the ONS 15454.

"Hardware Specifications" contains hardware and software specifications for the ONS 15454 ANSI and ETSI shelf assemblies and cards.

"Administrative and Service States" describes the state model for Cisco ONS 15454 DWDM cards, optical payload ports, out-of-band optical supervision channel (OSC) ports, optical channel network connections (OCHNC), and transponder/muxponder cards and ports.

"Network Element Defaults" describes and lists card, node, and CTC level network element (NE) defaults. To edit, import, or export NE defaults, refer to the "Maintain the Node" chapter in the Cisco ONS 15454 DWDM Procedure Guide.

Related Documentation

Use the Cisco ONS 15454 DWDM Reference Manual in conjunction with the following referenced publications:

Cisco ONS 15454 DWDM Procedure Guide, Release 7.0.1

Cisco ONS 15454 DWDM Troubleshooting Guide, Release 7.0.1

Cisco ONS SONET TL1 Command Guide, Release 7.0.1

Cisco ONS SONET TL1 Reference Guide, Release 7.0

Cisco ONS 15454 SDH TL1 Command Guide, Release 7.0.1

Cisco ONS 15454 SDH TL1 Reference Guide, Release 7.0

Release Notes for Cisco ONS 15454 Release 7.0.1

Release Notes for Cisco ONS 15454 SDH Release 7.0.1

Cisco Metroplanner DWDM Operations Guide, Release 7.0

For an update on End-of-Life and End-of-Sale notices, refer to http://cisco.com/en/US/products/hw/optical/ps2006/prod_eol_notices_list.html.

Document Conventions

This publication uses the following conventions:

Convention
Application

boldface

Commands and keywords in body text.

italic

Command input that is supplied by the user.

[     ]

Keywords or arguments that appear within square brackets are optional.

{ x | x | x }

A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.

Ctrl

The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information that the user must enter.

<     >

Command parameters that must be replaced by module-specific codes.



Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.



Caution Means reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.


Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

 



Obtaining Optical Networking Information

This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.

Where to Find Safety and Warning Information

For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.

Cisco Optical Networking Product Documentation CD-ROM

Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional

information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.