Cisco IOS IP Switching Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 28, 2007

Chapter: Introduction

Introduction

This document describes the commands used to configure IP switching features such as Cisco Express Forwarding, Distributed Cisco Express Forwarding, and Fast Switching in Cisco IOS software.

Note Prior to Cisco IOS Release 12.3(14)T, the commands for configuring IP switching features were presented in the Cisco IOS Switching Services Command Reference.

Refer to the configuration guide indicated here for configuration guidelines:


For Information About Configuring This Cisco IOS Feature...	Refer to the Following Cisco IOS Configuration Guide...
IP switching features	Cisco IOS IP Switching Configuration Guide.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)