LISP Show Commands

show adjacency (IP Routing LISP)

To display information about adjacency table, use the show adjacency command in user EXEC or privileged EXEC mode.

show adjacency {connid-mgr | LISP interface-number ip-address connectionid xkeys ip-address [vrf vrf-name]dport port-number} [detail | summary]

Syntax Description

connid-mgr

Displays information about connection IDs that are currently being managed by infrastructure.

LISP interface-number ip-address

Interface and IP address, optionally, VRF, of LISP for which connection ID is displayed.

connectionid xkeys ip-address [vrf vrf-name ]

Displays information about connection ID and extended keys.

dport port-number

Displays information about destination port.

detail

Displays detailed adjacency information.

summary

Displays a summary of adjacency information.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Fuji 16.9.1

This command was introduced.

Usage Guidelines

You can view adjacencies with the assigned managed connection id, or their extended keys using this command.

Examples

The following is a sample output from the show adjacency command displaying the connection ID. 

Device# show adjacency LISP0 172.16.1.21 connectionid 2130706434 detail
Protocol Interface                 Address
IP       LISP0                     172.16.1.21(6)
                                   connectionid 2130706434
                                   src 172.16.0.2  vrf 0
                                   dst port 1027

The following is a sample output from the show adjacency command displaying the extended keys.

Device# show adjacency LISP0 172.16.1.21 connectionid xkeys 172.16.0.2 dport 1027 detail
Protocol Interface                 Address
IP       LISP0                     172.16.1.21(6)
                                   connectionid 2130706434
                                   src 172.16.0.2  vrf 0
                                   dst port 1027

show ip lisp


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp service ipv4/ipv6 or show lisp instance-id [0-16777200] ipv4/ipv6.

To display the IPv4 Locator ID Separation Protocol (LISP) configuration status, use the show ip lisp command in privileged EXEC mode.

show ip lisp [router-lisp-id]

Syntax Description

router-lisp-id

(Optional) Router LISP instantiation ID. Valid values are 0 to 15.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB

This command was introduced.

15.1(1)XB1

This command was modified.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

15.1(1)XB2

This command was modified.

Cisco IOS XE Release 2.5.1XB

This command was modified.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M and modified to include the locator-table keyword.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S and modified to include the locator-table keyword.

Usage Guidelines

When used without the optional router LISP ID value, the show ip lisp command displays the IPv4 LISP configuration status for the local device for the default router LISP instantiation. When the router-lisp-id argument is used, the command displays the IPv4 LISP configuration status for the specified router LISP instantiation.

Examples

The following sample output from the show ip lisp command displays information about the current IPv4 LISP configuration status. The output varies, depending on the LISP features configured. 


Router# show ip lisp

Instance ID:                   0
  Ingress Tunnel Router (ITR):   enabled
  Egress Tunnel Router (ETR):    enabled
  Proxy-ITR Router (PITR):       disabled
  Proxy-ETR Router (PETR):       disabled
  Map Server (MS):               disabled
  Map Resolver (MR):             disabled
  Map-Request source:            10.0.2.1
  ITR Map-Resolver:              10.0.100.2
  ETR Map-Server(s):             10.0.100.2 (00:00:37)
  ITR Solicit Map Request (SMR): accept and process
     Max SMRs per map-cache entry:    8 more specifics
     Multiple SMR suppression time:   60 secs
  ETR accept mapping data:         disabled, verify disabled
  ETR map-cache TTL:             1d00h
  Locator Status Algorithms:
     RLOC-probe algorithm:       disabled
  Static mappings configured:    0
  Map-cache size/limit:          1/1000
  Map-cache activity check period: 60 secs
  Map-database size:             1
  Persistent map-cache:          interval 00:10:00
     Earliest next store:        00:05:28
     Location: flash:LISP-MapCache-IPv4-00000000-00030
Router#

The table below describes the significant fields shown in the display.

Table 1. show ip lisp Field Descriptions

Field

Description

Ingress Tunnel Router (ITR)

Indicates whether the router is configured as an ITR. See the ipv4 itr command.

Egress Tunnel Router (ETR)

Indicates whether the router is configured as an ETR. See the ipv4 etr command.

Proxy-ITR (PITR)

Indicates whether the router is configured as a PITR. See the ipv4 proxy-itr command.

Proxy-ETR (PETR)

Indicates whether the router is configured as a PETR. See the ipv4 proxy-etr command.

Map Server (MS)

Indicates whether the router is configured as a map server. See the ipv4 map-server command.

Map Resolver (MR)

Indicates whether the router is configured as a map resolver. See the ipv4 map-resolver command. .

Map-Request source

Identifies the IPv4 address used as the source in Map Request messages.

ITR Map-Resolver

Identifies the configured ITR map resolver. See the ipv4 map-resolver command.

ETR Map-Server(s)

Identifies the configured ETR map servers. See the ipv4 map-server command.

ITR Solicit Map Request (SMR)

Indicates whether SMRs are accepted and processed. See the ipv4 solicit-map-request ) command.

ETR accept mapping data

Indicates whether the ETR is configured to cache the mapping data contained in a map request. See the ipv4 etr accept-map-request-mapping command.

ETR map-cache TTL

Identifies the current ETR map cache time-to-live (TTL) value. See the ipv4 etr map-cache-ttl command.

Locator Status Algorithms

Indicates whether the locator reachability algorithm routing locator (RLOC) probing is enabled. See the loc-reach-algorithm command.

Static mappings configured

Indicates the number of static cache-map entries configured. See the map-cache command.

Map-cache size/limit

Indicates the number of entries currently in the map cache and indicates the limit value. See the ipv4 map-cache-limit command.

Map-cache activity check period

Indicates how often the control plane checks the map cache for outbound usage activity.

Map-database size

Indicates the number of entries currently in the map database. See the database-mapping .

Persistent map-cache

Indicates the persistent map-cache timer interval, next use, and storage location. See the ipv4 map-cache-persistent command.

ITR use proxy ETR RLOC configuration

Indicates that the router uses PETR services, and lists the PETR locator. See the ipv4 use-petr command.

The following sample output from the show ip lisp command displays information about the current IPv4 LISP configuration status when a LISP instantiation has been created using the router lisp id command and the locator-table command. Below, the results shown are based on router lisp 6 and locator-table vrf Cust-1. (Other output varies depending on the LISP features configured.) 


Router# show ip lisp 6 

Information applicable to all EID instances:
Router-lisp ID:              6
Locator table:               vrf Cust-1
Ingress Tunnel Router (ITR): enabled
Egress Tunnel Router (ETR):  enabled
---<more>---

Related Commands

Command

Description

database-mapping

Configure an IPv4 or IPv6 EID-to-RLOC mapping relationship and its associated traffic policy for LISP.

eid-table

Configures a LISP instance ID for association with a VRF table or default table through which the EID address space is reachable.

ip lisp source-locator

Configures a source locator to be used for an IPv4 LISP-encapsulated packets.

ipv4 etr

Configures the router to act as an IPv4 LISP ETR.

ipv4 etr accept-map-request-mapping

Configures an ETR to cache IPv4 mapping data contained in a map-request message.

ipv4 etr map-cache-ttl

Configures the TTL value inserted into LISP IPv4 map-reply messages.

ipv4 etr map-server

Configures the IPv4 or IPv6 locator address of the LISP map server to be used by the ETR when registering for IPv4 EIDs.

ipv4 itr

Configures the router to act as an IPv4 LISP ITR.

ipv4 itr map-resolver

Configures the IPv4 locator address of the LISP map resolver to be used by the ITR when sending map requests for IPv4 EID-to-RLOC mapping resolution.

ipv4 map-cache-limit

Configures the maximum number of IPv4 LISP map-cache entries allowed to be stored by the router.

ipv4 map-cache-persistent

Configures how often, in minutes, that an ITR should save its dynamically learned map-cache entries to a file in flash.

ipv4 map-resolver

Configures a router to act as an IPv4 LISP map resolver.

ipv4 map-server

Configures a router to act as an IPv4 LISP map server.

ipv4 solicit-map-request ignore

Configures an ITR to ignore an IPv4 Map Request message that has the solicit-map-request (SMR) bit set.

ipv4 proxy-etr

Configures the router to act as an IPv4 LISP PETR.

ipv4 proxy-itr

Configures the router to act as an IPv4 LISP PITR.

ipv4 use-petr

Configures a router to use a LISP PETR.

locator-table

Configure the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

map-cache

Configures a static IPv4 or IPv6 EID-to-RLOC mapping relationship and its associated traffic policy, or statically configures the packet handling behavior associated with a specified destination IPv4 or IPv6 EID prefix.

router lisp

Enters LISP configuration mode and configures LISP commands on a router.

show ip lisp locator-table

Displays the IPv4 LISP ETR configured local IPv4 EID prefixes and associated locator sets.

show ip lisp database


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 database.

To display Locator/ID Separation Protocol (LISP) Egress Tunnel Router (ETR) configured local IPv4 EID prefixes and associated locator sets, use the show ip lisp database command in privileged EXEC mode.

show ip lisp database [ EID-prefix]

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used on LISP ETR devices to display the configured local IPv4 EID prefixes and associated locator sets.

Examples

The following sample output from the show ip lisp database command displays the configured IPv4 EID-prefix blocks and associated locator sets. The output of this command shows the configured IPv4 endpoint identifier-to-routing locator (EID-to-RLOC) database mappings. 


Router# show running-config
.
.
.
!
database-mapping 172.16.21.0/24 192.168.156.222 priority 1 weight 100

Router# show ip lisp database

LISP ETR IPv4 Mapping Database

EID-prefix: 172.16.21.0/28
  192.168.156.222, priority: 1, weight: 100, state: up, local

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

show lisp instance-id ipv4 database

To display the Locator ID Separation Protocol (LISP) Egress Tunnel Router (ETR) configured local IPv4 EID prefixes and associated locator sets, use the show lisp instance-id [0-16777200] ipv4 database command in the privileged EXEC mode.

show lisp instance-id [0-16777200 ipv4 database

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used on LISP ETR devices to display the configured local IPv4 EID prefixes and associated locator sets.

Examples

The following sample output from the show ip lisp instance-id [0-16777200] ipv4 database command displays the configured IPv4 EID-prefix blocks and associated locator sets. The output of this command shows the configured IPv4 endpoint identifier-to-routing locator (EID-to-RLOC) database mappings. 


Router# show running-config
.
.
.
!
database-mapping 172.16.21.0/24 192.168.156.222 priority 1 weight 100

Router# show lisp instance-id 0 ipv4 database

LISP ETR IPv4 Mapping Database

EID-prefix: 172.16.21.0/28
  192.168.156.222, priority: 1, weight: 100, state: up, local

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

show ip lisp forwarding


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 forwarding.

To display Locator/ID Separation Protocol (LISP) IPv4 EID-prefix information, use the show ip lisp forwarding command in privileged EXEC mode.

show ip lisp forwarding {eid {local | remote [ eid-profix | detail] } | state}

Syntax Description

eid

Displays information related to EID prefixes (local or remote)

local

Displays locally configured EID prefixes.

remote

Displays forwarding action and locator status bits for dynamically learned EID-prefix blocks, and the number of packets and total bytes encapsulated

eid-prefix

(Optional) The specific remote EID prefix for which associated detailed information is displayed.

detail

(Optional) Displays detailed information associated with each remote EID prefix.

state

Displays information about the LISP module forwarding state

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB

This command was introduced.

15.1(1)XB1

This command was modified.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display information for either local or remote IPv4 EID prefixes. Local IPv4 EID prefixes are those for which the router is authoritative and added via the database-mapping command. Remote IPv4 EID prefixes are for remote sites and learned dynamically through map-reply information or via map-request messages when the ipv4 etr accept-map-request-mapping command is configured.

Examples

The following sample output from the show ip lisp forwarding eid local command displays local IPv4 EID-prefix information. 


Router# show ip lisp forwarding eid local

Prefix
192.168.1.0/24
192.168.100.0/24

The following sample output from the show ip lisp forwarding eid remote command displays summary remote IPv4 EID prefix information when the keyword detail is not used. The display shows EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv4 EID prefix. 


Router# show ip lisp forwarding eid remote

Prefix                 Fwd action  Locator status bits
0.0.0.0/0              signal      0x00000000
  packets/bytes       1/86
192.168.2.0/24         encap       0x00000003
  packets/bytes       4/344
192.168.3.0/24         encap       0x00000003
  packets/bytes       5/430

The following sample output from the show ip lisp forwarding eid remote detail command displays detailed remote IPv4 EID-prefix information by adding the detail keyword. The display shows EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv4 EID-prefix. 


Router# show ip lisp forwarding eid remote detail

Prefix                 Fwd action  Locator status bits
0.0.0.0/0              signal      0x00000000
  packets/bytes       1/86
  path list 060A4690, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14)
  1 path
    path 060A4DF0, path list 060A4690, share 1/1, type attached prefix, for IPv4
    attached to LISP0, adjacency glean for LISP0
  1 output chain
  chain[0]:  glean for LISP0
192.168.2.0/24         encap       0x00000003
  packets/bytes      19/1634
  path list 06BFA2B8, flags 0x49, 5 locks, per-destination
  ifnums:
   LISP0(14): 10.0.0.6
  1 path
    path 06E8C8C0, path list 06BFA2B8, share 100/100, type attached nexthop, for IPv4
    nexthop 10.0.0.6 LISP0, adjacency IP midchain out of LISP0, addr 10.0.0.6 073747B8
  1 output chain
Prefix                 Fwd action  Locator status bits
  chain[0]:  IP midchain out of LISP0, addr 10.0.0.6 073747B8 IP adj out of Ethernet0/0, addr 10.0.0.2 0620D8A8
192.168.3.0/24         encap       0x00000003

The following sample output from the show ip lisp forwarding state command displays detailed information about the state of the LISP process forwarding state. ( IPv4 and IPv6 information is presented). 


Router# show ip lisp forwarding state

LISP forwarding state for EID table IPv4:Default
  EID VRF                    Default (0x0)
    IPv4
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv4:Default
      ALT table              <null>
      Locator status bits    0x00000001
    IPv6
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv6:Default
      ALT table              <null>
      Locator status bits    0x00000001
    RLOC transport VRF       Default (0x0)
      IPv4 RLOC table        IPv4:Default
      IPv6 RLOC table        IPv6:Default
    LISP virtual interface   LISP0

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

ipv4 etr accept-map- request-mapping

Configures an ETR to cache IPv4 mapping data contained in a map-request message.

show ip lisp map-cache

Displays the current dynamic and static IPv4 EID-to-RLOC map-cache entries.

show ip lisp instance-id ipv4 forwarding

To display Locator/ID Separation Protocol (LISP) IPv4 EID-prefix information, use the show lisp instance-id [0-16777200] ipv4 forwarding command in privileged EXEC mode.

show lisp instance-id [0-16777200] ipv4 forwarding

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display information for either local or remote IPv4 EID prefixes. Local IPv4 EID prefixes are those for which the router is authoritative and added via the database-mapping command. Remote IPv4 EID prefixes are for remote sites and learned dynamically through map-reply information or via map-request messages when the ipv4 etr accept-map-request-mapping command is configured.

Examples

The following sample output from the show lisp forwarding instance-id [0-16777200] ipv4 forwarding eid local command displays local IPv4 EID-prefix information. 


Router# show lisp instance-id 0 ipv4 forwarding eid local

Prefix
192.168.1.0/24
192.168.100.0/24

The following sample output from the show lisp instance-id [0-16777200] ipv4 forwarding eid remote command displays summary remote IPv4 EID prefix information when the keyword detail is not used. The display shows EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv4 EID prefix. 


Router# show lisp instance-id 0 ipv4 forwarding eid remote

Prefix                 Fwd action  Locator status bits
0.0.0.0/0              signal      0x00000000
  packets/bytes       1/86
192.168.2.0/24         encap       0x00000003
  packets/bytes       4/344
192.168.3.0/24         encap       0x00000003
  packets/bytes       5/430

The following sample output from the show lisp instance-id [0-16777200] ipv4forwarding eid remote detail command displays detailed remote IPv4 EID-prefix information by adding the detail keyword. The display shows EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv4 EID-prefix. 


Router# show lisp instance-id 0 ipv4 forwarding eid remote detail

Prefix                 Fwd action  Locator status bits
0.0.0.0/0              signal      0x00000000
  packets/bytes       1/86
  path list 060A4690, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14)
  1 path
    path 060A4DF0, path list 060A4690, share 1/1, type attached prefix, for IPv4
    attached to LISP0, adjacency glean for LISP0
  1 output chain
  chain[0]:  glean for LISP0
192.168.2.0/24         encap       0x00000003
  packets/bytes      19/1634
  path list 06BFA2B8, flags 0x49, 5 locks, per-destination
  ifnums:
   LISP0(14): 10.0.0.6
  1 path
    path 06E8C8C0, path list 06BFA2B8, share 100/100, type attached nexthop, for IPv4
    nexthop 10.0.0.6 LISP0, adjacency IP midchain out of LISP0, addr 10.0.0.6 073747B8
  1 output chain
Prefix                 Fwd action  Locator status bits
  chain[0]:  IP midchain out of LISP0, addr 10.0.0.6 073747B8 IP adj out of Ethernet0/0, addr 10.0.0.2 0620D8A8
192.168.3.0/24         encap       0x00000003

The following sample output from the show lisp instance-id [0-16777200] ipv4 forwarding state command displays detailed information about the state of the LISP process forwarding state. ( IPv4 and IPv6 information is presented). 


Router# show lisp instance-id 0 ipv4 forwarding state

LISP forwarding state for EID table IPv4:Default
  EID VRF                    Default (0x0)
    IPv4
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv4:Default
      ALT table              <null>
      Locator status bits    0x00000001
    IPv6
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv6:Default
      ALT table              <null>
      Locator status bits    0x00000001
    RLOC transport VRF       Default (0x0)
      IPv4 RLOC table        IPv4:Default
      IPv6 RLOC table        IPv6:Default
    LISP virtual interface   LISP0

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

ipv4 etr accept-map- request-mapping

Configures an ETR to cache IPv4 mapping data contained in a map-request message.

show ip lisp map-cache

Displays the current dynamic and static IPv4 EID-to-RLOC map-cache entries.

show ip lisp instance-id


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 alt.

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show ip lisp instance-id command in privileged EXEC mode.

show ip lisp instance-id iid alt negative-prefix EID-prefix

Syntax Description

iid

EID instance-id.

EID-prefix

IPv4 EID address covered by negative ALT prefix.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB3

This command was introduced.

2.5.1XC

This command was integrated into Cisco IOS XE Release 2.5.1XC.

Usage Guidelines

This command is only used on LISP Map-Server (MS) devices to display the negative prefix hole in the LISP ALT for an EID within a specified instance-id.

Examples

The following sample output from the show ip lisp instance-id command for the instance-id 123 and EID 172.16.0.1. 


Router# show ip lisp instance-id 123 alt negative-prefix 172.16.0.1
Negative mapping system prefix 128.0.0.0/2
Router#

Related Commands

Command

Description

eid-prefix (LISP site)

Configures the EID-prefix associated with a LISP site on a Map-Server as part of the LISP Site configuration process.

show lisp instance-id ipv4 alt

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show lisp instance-id [0-16777200] ipv4 alt command in privileged EXEC mode.

show lisp instance-id [0-16777200] ipv4 alt

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is only used on LISP Map-Server (MS) devices to display the negative prefix hole in the LISP ALT for an EID within a specified instance-id.

Examples

The following sample output from the show lisp instance-id ipv4 alt command for the instance-id 123 and EID 172.16.0.1. 


Router# show lisp instance-id 123 ipv4 alt negative-prefix 172.16.0.1
Negative mapping system prefix 128.0.0.0/2
Router#

Related Commands

Command

Description

eid-prefix (LISP site)

Configures the EID-prefix associated with a LISP site on a Map-Server as part of the LISP Site configuration process.

show ip lisp locator-table


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp locator table.

To display Locator/ID Separation Protocol (LISP) IPv4 configurations associated with a specific locator table, use the show ip lisp locator-table command in privileged EXEC mode.

show ip lisp locator-table {default | vrf vrf-name}

Syntax Description

default

Displays IPv4 LISP information and configuration status related to the default table.

vrf vrf-name

Displays IPv4 LISP information and configuration status related to the specified virtual routing and forwarding (VRF) table.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB6

This command was introduced.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S.

Usage Guidelines

The locator-table command creates an association between a LISP instantiation and a virtual routing and forwarding (VRF) table through which the routing locator address space is reachable. The show ip lisp locator-table command displays the IPv4 LISP configuration status for a specific locator table. A locator table can be the default, meaning the global routing table, or id can be a specific VRF.

Examples

The following shows sample output from the show ip lisp locator-table command for the vrf Cust-1: 


Router# show ip lisp locator-table Cust-1  

Information applicable to all EID instances:
  Router-lisp ID:                   1
  Locator table:                    vrf Cust-1
  Ingress Tunnel Router (ITR):      disabled
  Egress Tunnel Router (ETR):       disabled
  Proxy-ITR Router (PITR):          enabled RLOCs: 10.100.8.2
  Proxy-ETR Router (PETR):          enabled
  Map Server (MS):                  disabled
  Map Resolver (MR):                disabled
  Delegated Database Tree (DDT):    disabled
  ITR Map-Resolver(s):              10.100.1.2
  ITR Solicit Map Request (SMR):    accept and process
    Max SMRs per map-cache entry:   8 more specifics
    Multiple SMR suppression time:  20 secs
  ETR accept mapping data:          disabled, verify disabled
  ETR map-cache TTL:                1d00h
  Locator Status Algorithms:
    RLOC-probe algorithm:           disabled
    LSB reports:                    process
  Map-cache limit:                  1000
  Map-cache activity check period:  60 secs
  Persistent map-cache:             disabled
Router#

Related Commands

Command

Description

locator-table

Configures the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

show ip lisp map-cache


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 map-cache.

To display the current dynamic and static IPv4 endpoint identifier-to-routing locator (EID-to-RLOC) map-cache entries, use the show ip lisp map-cache command in privileged EXEC mode.

show ip lisp map-cache [destination-EID | destination-EID-prefix/ prefix-length | eid-table {default | vrfname | detail}]

Syntax Description

destination-EID

(Optional) Destination EID for which to display mapping.

destination-EID-prefix/prefix-length

(Optional) Destination EID prefix for which to display mapping.

eid-table

(Optional) Specifies an EID table for which to display mapping.

default

(Optional) Displays detailed information for the default virtual routing and forwarding (VRF).

vrf name

(Optional) Displays detailed information for the identified VRF.

detail

(Optional) Displays detailed EID-to-RLOC cache mapping information

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB

This command was introduced.

15.1(1)XB1

This command was modified.

Cisco IOS XE2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display the current dynamic and static IPv4 EID-to-RLOC map-cache entries. When no IPv4 EID or IPv4 EID prefix is specified, summary information is listed for all current dynamic and static IPv4 EID-to-RLOC map-cache entries. When an IPv4 EID or IPv4 EID prefix is included, information is listed for the longest-match lookup in the cache. When the detail option is used, detailed (rather than summary) information related to all current dynamic and static IPv4 EID-to-RLOC map-cache entries is displayed.

Examples

The following sample output from the show ip lisp map-cache command (without the use of an IPv4 EID or IPv4 EID prefix) displays a summary list of current dynamic and static IPv4 EID-to-RLOC map-cache entries. The display shows IPv4 EID prefix and associated information. 


Router# show ip lisp map-cache

LISP IPv4 Mapping Cache, 2 entries
0.0.0.0/0, uptime: 00:00:17, expires: never, via static
  Negative cache entry, action: send-map-request
192.168.2.0/24, uptime: 00:00:02, expires: 23:59:54, via map-reply, complete
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:02  up           1/100
  10.1.0.6  00:00:02  admin-down 255/0

The following sample output from the show ip lisp map-cache detail command displays a detailed list of current dynamic and static IPv4 EID-to-RLOC map-cache entries. 


Router# show ip lisp map-cache detail

LISP IPv4 Mapping Cache, 2 entries

0.0.0.0/0, uptime: 00:00:41, expires: never, via static
  State: send-map-request, last modified: 00:00:41, map-source: local
  Idle, Packets out: 0
  Negative cache entry, action: send-map-request
192.168.2.0/24, uptime: 00:00:26, expires: 23:59:31, via map-reply, complete
  State: complete, last modified: 00:00:26, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:26  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never
  10.1.0.6  00:00:26  admin-down 255/0
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

The following sample output from the show ip lisp map-cache command with a specific IPv4 EID prefix displays detailed information associated with that IPv4 EID-prefix entry. 


Router# show ip lisp map-cache 192.168.2.0/24

LISP IPv4 Mapping Cache, 2 entries

192.168.2.0/24, uptime: 00:01:01, expires: 23:58:56, via map-reply, complete
  State: complete, last modified: 00:01:01, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:01:01  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never
  10.1.0.6  00:01:01  admin-down 255/0
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

Related Commands

Command

Description

show ip lisp forwarding

Displays LISP local or remote IPv4 EID-prefix information.

show lisp instance-id ipv4 map-cache

To display the current dynamic and static IPv4 endpoint identifier-to-routing locator (EID-to-RLOC) map-cache entries, use the show lisp instance-id ipv4 map-cache command in privileged EXEC mode.

show lisp instance-id ipv4 map-cache [ destination-EID | destination-EID-prefix / prefix-length | eid-table { default | vrf name | detail } ]

Syntax Description

destination-EID

(Optional) Destination EID for which to display mapping.

destination-EID-prefix/prefix-length

(Optional) Destination EID prefix for which to display mapping.

eid-table

(Optional) Specifies an EID table for which to display mapping.

default

(Optional) Displays detailed information for the default virtual routing and forwarding (VRF).

vrf name

(Optional) Displays detailed information for the identified VRF.

detail

(Optional) Displays detailed EID-to-RLOC cache mapping information

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display the current dynamic and static IPv4 EID-to-RLOC map-cache entries. When no IPv4 EID or IPv4 EID prefix is specified, summary information is listed for all current dynamic and static IPv4 EID-to-RLOC map-cache entries. When an IPv4 EID or IPv4 EID prefix is included, information is listed for the longest-match lookup in the cache. When the detail option is used, detailed (rather than summary) information related to all current dynamic and static IPv4 EID-to-RLOC map-cache entries is displayed.

Examples

The following sample output from the show lisp instance-id ipv4 map-cache command (without the use of an IPv4 EID or IPv4 EID prefix) displays a summary list of current dynamic and static IPv4 EID-to-RLOC map-cache entries. The display shows IPv4 EID prefix and associated information. 


Router# show lisp instance-id ipv4 map-cache

LISP IPv4 Mapping Cache, 2 entries
0.0.0.0/0, uptime: 00:00:17, expires: never, via static
  Negative cache entry, action: send-map-request
192.168.2.0/24, uptime: 00:00:02, expires: 23:59:54, via map-reply, complete
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:02  up           1/100
  10.1.0.6  00:00:02  admin-down 255/0

The following sample output from the show lisp instance-id ipv4 map-cache detail command displays a detailed list of current dynamic and static IPv4 EID-to-RLOC map-cache entries. 


Router# show lisp instance-id ipv4 map-cache detail

LISP IPv4 Mapping Cache, 2 entries

0.0.0.0/0, uptime: 00:00:41, expires: never, via static
  State: send-map-request, last modified: 00:00:41, map-source: local
  Idle, Packets out: 0
  Negative cache entry, action: send-map-request
192.168.2.0/24, uptime: 00:00:26, expires: 23:59:31, via map-reply, complete
  State: complete, last modified: 00:00:26, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:26  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never
  10.1.0.6  00:00:26  admin-down 255/0
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

The following sample output from the show lisp instance-id ipv4 map-cache command with a specific IPv4 EID prefix displays detailed information associated with that IPv4 EID-prefix entry. 


Router# show lisp instance-id ipv4 map-cache 192.168.2.0/24

LISP IPv4 Mapping Cache, 2 entries

192.168.2.0/24, uptime: 00:01:01, expires: 23:58:56, via map-reply, complete
  State: complete, last modified: 00:01:01, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:01:01  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never
  10.1.0.6  00:01:01  admin-down 255/0
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

Related Commands

Command

Description

show ip lisp forwarding

Displays LISP local or remote IPv4 EID-prefix information.

show ip lisp route-import database


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 route-import database.

To display the current IPv4 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define local endpoint identifier (EID) database entries, use the show ip lisp route-import database command in privileged EXEC mode.

show ip lisp [ router-lisp-id ] [ instance-id iid ] route-import database [ ipv4-address | ipv4-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520
instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv4-address

(Optional) IPv4 address to longest-match against imported routes.

ipv4-prefix

(Optional) IPv4 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

15.4(2)T

This command was introduced.

3.12.0S

This command was integrated into Cisco IOS XE Release 3.12.0S.

Usage Guidelines

When the optional router-lisp-id argument is used, the show ip lisp route-import database command displays the IPv4 LISP configuration status for the specified router LISP instantiation. When used without the optional argument, the command displays the IPv4 LISP configuration status for the local device for the default router LISP ID.

When the optional instance-id i-id keyword and argument pair is used, the show ip lisp route-import database command displays the IPv4 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv4 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv4-address argument, the show ip lisp route-import database command displays the IPv4 LISP configuration status for the local device for the IPv4 address to longest match against imported routes. When used with the optional ipv4-prefix argument, the command displays the IPv4 LISP configuration status for the local device for the IPv4 imported route prefix. When used without the optional ipv4-address or ipv4-prefix arguments, the command displays the IPv4 LISP configuration status for the local device for all IPv4 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv4 RIB routes imported into LISP to define local EID database entries using the show ip lisp route-import database command: 

Device# show ip lisp route-import database

LISP IPv4 imported routes for EID-table default (IID 0)
Config: 1, Entries: 8 (limit 1000)
Prefix                      Uptime     Source  Map-cache   State
10.1.0.0/16                 00:07:52   ospf 10 installed
10.10.1.0/24                00:14:02   ospf 10 installed
10.10.2.0/24                00:14:02   ospf 10 installed
10.10.3.0/24                00:14:02   ospf 10 installed
10.10.4.0/24                00:14:02   ospf 10 installed
10.10.5.0/24                00:14:02   ospf 10 installed
172.16.1.0/24               00:11:52   ospf 10 installed
192.168.20.0/24             00:11:52   ospf 10 installed

Related Commands

Command

Description

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map cache.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map cache.

show lisp instance-id ipv4 route-import database

To display the current IPv4 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define local endpoint identifier (EID) database entries, use the show ip lisp instance-id [0-16777200] ipv4 route-import database command in privileged EXEC mode.

show lisp [ router-lisp-id ] [ instance-id iid ] ipv4 route-import database [ ipv4-address | ipv4-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520
instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv4-address

(Optional) IPv4 address to longest-match against imported routes.

ipv4-prefix

(Optional) IPv4 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

When the optional router-lisp-id argument is used, the show lisp instance-id [0-16777200] route-import database command displays the IPv4 LISP configuration status for the specified router LISP instantiation. When used without the optional argument, the command displays the IPv4 LISP configuration status for the local device for the default router LISP ID.

When the optional instance-id i-id keyword and argument pair is used, the show lisp instance-id [0-16777200] ipv4 route-import database command displays the IPv4 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv4 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv4-address argument, the show lisp instance-id [0-16777200] route-import database command displays the IPv4 LISP configuration status for the local device for the IPv4 address to longest match against imported routes. When used with the optional ipv4-prefix argument, the command displays the IPv4 LISP configuration status for the local device for the IPv4 imported route prefix. When used without the optional ipv4-address or ipv4-prefix arguments, the command displays the IPv4 LISP configuration status for the local device for all IPv4 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv4 RIB routes imported into LISP to define local EID database entries using the show lisp instance-id [0-16777200] ipv4route-import database command: 

Device# show lisp instance-id [0-16777200] ipv4 route-import database

LISP IPv4 imported routes for EID-table default (IID 0)
Config: 1, Entries: 8 (limit 1000)
Prefix                      Uptime     Source  Map-cache   State
10.1.0.0/16                 00:07:52   ospf 10 installed
10.10.1.0/24                00:14:02   ospf 10 installed
10.10.2.0/24                00:14:02   ospf 10 installed
10.10.3.0/24                00:14:02   ospf 10 installed
10.10.4.0/24                00:14:02   ospf 10 installed
10.10.5.0/24                00:14:02   ospf 10 installed
172.16.1.0/24               00:11:52   ospf 10 installed
192.168.20.0/24             00:11:52   ospf 10 installed

Related Commands

Command

Description

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map cache.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map cache.

show ip lisp route-import map-cache


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 route-import map-cache.

To display the current IPv4 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define endpoint identifier (EID) address space in map cache, use the show ip lisp route-import map-cache command in privileged EXEC mode.

show ip lisp [ router-lisp-id ] [ instance-id iid ] route-import map-cache [ ipv4-address | ipv4-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520
instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv4-address

(Optional) IPv4 address to longest-match against imported routes.

ipv4-prefix

(Optional) IPv4 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

15.4(2)T

This command was introduced.

3.12.0S

This command was integrated into Cisco IOS XE Release 3.12.0S.

Usage Guidelines

When the optional router-lisp-id argument is used, the show ip lisp route-import map-cache command displays the IPv4 LISP configuration status for the specified router LISP instantiation. When used without the optional argument, the command displays the IPv4 LISP configuration status for the local device for the default router LISP ID.

When the optional instance-id keyword is used with the iid argument, the show ip lisp route-import map-cache command displays the IPv4 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv4 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv4-address or ipv4-prefix arguments, the show ip lisp route-import map-cache command displays the IPv4 LISP configuration status for the local device for IPv4 address to longest match against imported routes or IPv4 imported route prefix respectively. When used without either of the optional ipv4-address or ipv4-prefix arguments, the command displays the IPv4 LISP configuration status for the local device for all IPv4 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv4 RIB routes imported into LISP to define EID address space in map-cache using the show ip lisp route-import map-cache command: 

Device# show ip lisp route-import map-cache

LISP IPv4 imported routes for EID-table default (IID 0)
Config: 1, Entries: 6 (limit 1000)
Prefix                    Uptime     Source     Map-cache  State
10.1.0.0/16               00:07:52   bgp 64496  installed
10.2.0.0/16               00:21:31   bgp 64496  installed
10.3.0.0/16               00:21:31   bgp 64496  installed
10.4.0.0/16               00:21:31   bgp 64496  installed
172.16.1.0/24             00:11:52   bgp 64496  installed
192.168.20.0/24           00:11:52   bgp 64496  installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map-cache.

show lisp instance-id ipv4 route-import map-cache

To display the current IPv4 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define endpoint identifier (EID) address space in map cache, use the show lisp instance-id [0-16777200] route-import map-cache command in privileged EXEC mode.

show lisp [ router-lisp-id ] [ instance-id iid ] ipv4 route-import map-cache [ ipv4-address | ipv4-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520
instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv4-address

(Optional) IPv4 address to longest-match against imported routes.

ipv4-prefix

(Optional) IPv4 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

When the optional router-lisp-id argument is used, the show lisp instance-id [0-16777200] ipv4 route-import map-cache command displays the IPv4 LISP configuration status for the specified router LISP instantiation. When used without the optional argument, the command displays the IPv4 LISP configuration status for the local device for the default router LISP ID.

When the optional instance-id keyword is used with the iid argument, the show lisp instance-id [0-16777200] route-import map-cache command displays the IPv4 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv4 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv4-address or ipv4-prefix arguments, the show lisp instance-id [0-16777200] ipv4 route-import map-cache command displays the IPv4 LISP configuration status for the local device for IPv4 address to longest match against imported routes or IPv4 imported route prefix respectively. When used without either of the optional ipv4-address or ipv4-prefix arguments, the command displays the IPv4 LISP configuration status for the local device for all IPv4 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv4 RIB routes imported into LISP to define EID address space in map-cache using the show ip lisp route-import map-cache command: 

Device# show lisp instance-id ipv4 route-import map-cache

LISP IPv4 imported routes for EID-table default (IID 0)
Config: 1, Entries: 6 (limit 1000)
Prefix                    Uptime     Source     Map-cache  State
10.1.0.0/16               00:07:52   bgp 64496  installed
10.2.0.0/16               00:21:31   bgp 64496  installed
10.3.0.0/16               00:21:31   bgp 64496  installed
10.4.0.0/16               00:21:31   bgp 64496  installed
172.16.1.0/24             00:11:52   bgp 64496  installed
192.168.20.0/24           00:11:52   bgp 64496  installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map-cache.

show ip lisp statistics


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 statistics.

To display Locator/ID Separation Protocol (LISP) IPv4 address-family packet count statistics, use the show ip lisp statistics command in privileged EXEC mode.

show ip lisp statistics

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB1

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display IPv4 LISP statistics related to packet encapsulations, de-encapsulations, map requests, map replies, map registers, and other LISP-related packets.

Examples

The following sample output from the show ip lisp statistics command displays the current LISP IPv4 address family statistics. The output varies, depending on the LISP features configured and the state of various LISP components: 


Router# show ip lisp statistics

LISP Statistics - last cleared: never
Control Packets:
  Map-Requests in/out:                      76/35
    Encapsulated Map-Requests in/out:       76/35
    RLOC-probe Map-Requests in/out:         0/0
  Map-Reply records in/out:                 35/76
    Authoritative records in/out:           0/76
    Non-authoritative records in:           35
    Negative records in:                    35
    RLOC-probe records in/out:              0/0
  Map-Registers out:                        626
Errors:
  Map-Request format errors:                0
  Map-Reply format errors:                  0
  Map-Reply spoof alerts:                   0
  Mapping record TTL alerts:                0
Cache Related:
  Cache entries created/deleted:            72/69
  Number of EID-prefixes in map-cache:      3
  Number of negative entries in map-cache:  3
  Total number of RLOCs in map-cache:       0
  Average RLOCs per EID-prefix:             0
Forwarding:
  Number of data signals processed:         35 (+ dropped 0)
  Number of reachability reports:           0 (+ dropped 0)

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.

show lisp ipv4 statistics


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 statistics.

To display Locator/ID Separation Protocol (LISP) IPv4 address-family packet count statistics, use the show lisp ipv4 statistics command in privileged EXEC mode.

show lisp ipv4 statistics

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display IPv4 LISP statistics related to packet encapsulations, de-encapsulations, map requests, map replies, map registers, and other LISP-related packets.

Examples

The following sample output from the show lisp ipv4 statistics command displays the current LISP IPv4 address family statistics. The output varies, depending on the LISP features configured and the state of various LISP components: 


Router# show lisp ipv4 statistics

LISP Statistics - last cleared: never
Control Packets:
  Map-Requests in/out:                      76/35
    Encapsulated Map-Requests in/out:       76/35
    RLOC-probe Map-Requests in/out:         0/0
  Map-Reply records in/out:                 35/76
    Authoritative records in/out:           0/76
    Non-authoritative records in:           35
    Negative records in:                    35
    RLOC-probe records in/out:              0/0
  Map-Registers out:                        626
Errors:
  Map-Request format errors:                0
  Map-Reply format errors:                  0
  Map-Reply spoof alerts:                   0
  Mapping record TTL alerts:                0
Cache Related:
  Cache entries created/deleted:            72/69
  Number of EID-prefixes in map-cache:      3
  Number of negative entries in map-cache:  3
  Total number of RLOCs in map-cache:       0
  Average RLOCs per EID-prefix:             0
Forwarding:
  Number of data signals processed:         35 (+ dropped 0)
  Number of reachability reports:           0 (+ dropped 0)

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.

show ipv6 lisp


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp service ipv6 or show lisp instance-id [0-16777200] ipv6.

To display the Locator/ID Separation Protocol (LISP) IPv6 configuration status, use the show ipv6 lisp command in privileged EXEC mode.

show ipv6 lisp [router-lisp-id]

Syntax Description

router-lisp-id

(Optional) router lisp instantiation id (0-15)

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB

This command was introduced.

15.1(1)XB1

This command was modified.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

15.1(1)XB2

This command was modified.

Cisco IOS XE Release 2.5.1XB

This command was modified.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M and modified to include the locator-table keyword.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S and modified to include the locator-table keyword.

Usage Guidelines

When used without the optional router LISP ID value, the show ipv6 lisp command displays the IPv6 LISP configuration status for the local device for the default router LISP instantiation. When the router-lisp-id argument is used, the command displays the IPv6 LISP configuration status for the specified router LISP instantiation.

Examples

The following sample output from the show ipv6 lisp command displays information about the current IPv6 LISP configuration status. The output varies, depending on the LISP features configured: 


Router# show ipv6 lisp

  Ingress Tunnel Router (ITR):      enabled
  Egress Tunnel Router (ETR):       enabled
  Proxy-ITR Router (PITR):          disabled
  Proxy-ETR Router (PETR):          disabled
  Map Server (MS):                  disabled
  Map Resolver (MR):                disabled
  Map-Request source:               2001:DB8:A:2::1
  ITR Map-Resolver:                 10.0.100.2
  ETR Map-Server(s):                10.0.100.2 (00:00:07)
  ETR accept mapping data:          disabled, verify disabled
  ETR map-cache TTL:                1d00h
  Locator Status Algorithms:
    RLOC-probe algorithm:           disabled
  Static mappings configured:       0
  Map-cache size/limit:             1/1000
  Map-cache activity check period:  60 secs

The table below describes the significant fields shown in the display.

show ipv6 lisp Field Descriptors

Table 2. ipv6 lisp Field Descriptions

Field

Description

Ingress Tunnel Router (ITR)

Indicates whether the router is configured as an ITR. See the ipv6 itr command.

Egress Tunnel Router (ETR)

Indicates whether the router is configured as an ETR. See the ipv6 etr command.

Proxy-ITR (PITR)

Indicates whether the router is configured as a PITR. See the ipv6 proxy-itr command.

Proxy-ETR (PETR)

Indicates whether the router is configured as a PETR. See the ipv6 proxy-etr command.

Map Server (MS)

Indicates whether the router is configured as a map server. See the ipv6 map-server command.

Map Resolver (MR)

Indicates whether the router is configured as a map resolver. See the ipv6 map-resolver command.

Map-Request source

Identifies the IPv6 address used as the source in Map Request messages.

ITR Map-Resolver

Identifies the configured ITR map resolver. See the ipv6 itr map-resolver command.

ETR Map-Server(s)

Identifies the configured ETR map servers. See the ipv6 etr map-server command.

ITR Solicit Map Request (SMR)

Indicates whether SMRs are accepted and processed. See the ipv6 solicit-map-request command.

ETR accept mapping data

Indicates whether the ETR is configured to cache the mapping data contained in a map request. See the ipv6 etr accept-map-request-mapping command.

ETR map-cache TTL

Identifies the current ETR map-cache TTL. See the ipv6 etr map-cache-ttl command.

RLOC-probe algorithm

Indicates whether the locator reachability algorithm RLOC probing is enabled. See the loc-reach-algorithm command.

Static mappings configured

Indicates the number of static cache-map entries configured. See the map-cache command.

Map-cache size/limit

Indicates the number of entries currently in the map cache and indicates the limit value. See the ipv6 map-cache-limit command.

Map-cache activity check period

Indicates how often the control plane checks the map cache for outbound usage activity.

Map-database size

Indicates the number of entries currently in the map-database. See the database-mapping command.

Persistent map-cache

Indicates the persistent map-cache timer interval, next use, and storage location. See the ipv6 map-cache-persistent command.

ITR use proxy ETR RLOC configuration

When configured, indicates that the router uses PETR services and lists the PETR locator. See the ipv6 use-petr command.

The following sample output from the show ipv6 lisp command displays information about the current IPv6 LISP configuration status when a LISP instantiation has been created using the router lisp router-lisp-id command and the locator-table command. Below, the results shown are based on router LISP 6 and locator table VRF named Cust-1. (Other output varies depending on the LISP features configured.) 


Router# show ipv6 lisp 6

Information applicable to all EID instances:
Router-lisp ID: 6
Locator table: vrf Cust-1
Ingress Tunnel Router (ITR): enabled
---<more>---

Related Commands

Command

Description

database-mapping

Configures an IPv4 or IPv6 EID-to-RLOC mapping relationship and its associated traffic policy for LISP.

eid-table

Configures a LISP instance-id for association with a VRF table or default table through which the EID address space is reachable.

ipv6 etr

Configures a router to act as an IPv6 LISP ETR.

ipv6 etr map-cache-ttl

Configures the TTL value inserted into LISP IPv6 map-reply messages.

ipv6 etr map-server

Configures the IPv4 or IPv6 locator address of the LISP map server to be used by the ETR when registering for IPv4 EIDs.

ipv6 itr

Configures the router to act as an IPv6 LISP ITR.

ipv6 itr map-resolver

Configures the IPv6 locator address of the LISP map resolver to be used by the ITR when sending map requests for IPv6 EID-to-RLOC mapping resolution.

ipv6 lisp etr accept-map- request-mapping

Configures an ETR to cache IPv6 mapping data contained in a map-request message.

ipv6 lisp source- locator

Configures a source locator to be used for IPv6 LISP encapsulated packets.

ipv6 map-cache-limit

Configures the maximum number of IPv6 LISP map-cache entries allowed to be stored by the router.

ipv6 map-cache-persistent

Configures how often, in minutes, an ITR should save its dynamically learned IPv6 map-cache entries to a file in flash.

ipv6 map-resolver

Configures the router to act as an IPv6 LISP map resolver.

ipv6 map-server

Configures the router to act as an IPv6 LISP map server.

ipv6 solicit-map-request ignore

Configures an ITR to ignore an IPv6 Map Request message that has the solicit-map-request (SMR) bit set.

ipv6 proxy-etr

Configures the router to act as an IPv6 LISP PETR.

ipv6 proxy-itr

Configures the router to act as an IPv6 LISP PITR.

ipv6 use-petr

Configures a router to use an IPv6 LISP PETR.

locator-table

Configures the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

map-cache

Configures a static IPv4 or IPv6 EID-to-RLOC mapping relationship and its associated traffic policy, or statically configures the packet handling behavior associated with a specified destination IPv4 or IPv6 EID prefix.

router lisp

Enters LISP configuration mode and configures LISP commands on a router.

show ipv6 lisp locator-table

Displays the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

show ipv6 lisp database


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 database.

To display Locator/ID Separation Protocol (LISP) Egress Tunnel Router (ETR) configured local IPv6 EID prefixes and associated locator sets, use the show ipv6 lisp database command in privileged EXEC mode.

show ipv6 lisp database [eid-prefix]

Syntax Description

eid-prefix

(Optional) Displays one of any IPv6 EID prefixes configured using the database-mapping command.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB1

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used on LISP ETR devices to display the configured local IPv6 EID prefixes and associated locator sets.

Examples

The following sample output from the show ipv6 lisp database command displays the configured IPv6 EID-prefix blocks and associated locator sets and the configured IPv6 endpoint identifier-to-routing locator (EID-to-RLOC) database mappings: 


Router# show running-config
.
.
!
database-mapping 2610:D0:1209::/48 172.16.156.222 priority 1 weight 100
!
Router# show ipv6 lisp database

LISP ETR IPv6 Mapping Database, LSBs: 0x1

EID-prefix: 2610:D0:1209::/48
  172.16.156.222, priority: 1, weight: 100, state: up, local

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

show lisp instance-id ipv6 database

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show lisp instance-id [0-16777200] ipv6 database command in privileged EXEC mode.

show lisp instance-id [0-16777200] ipv6 database

Syntax Description

There is no syntax description table for this command.

Command Modes

Privileged EXEC (#)

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used on LISP ETR devices to display the configured local IPv6 EID prefixes and associated locator sets.

Examples

The following sample output from the show lisp instance-id [0-16777200] ipv6 database command displays the configured IPv6 EID-prefix blocks and associated locator sets and the configured IPv6 endpoint identifier-to-routing locator (EID-to-RLOC) database mappings: 


Router# show running-config
.
.
!
database-mapping 2610:D0:1209::/48 172.16.156.222 priority 1 weight 100
!
Router# show lisp instance-id [0-16777200] ipv6 database

LISP ETR IPv6 Mapping Database, LSBs: 0x1

EID-prefix: 2610:D0:1209::/48
  172.16.156.222, priority: 1, weight: 100, state: up, local

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

show ipv6 lisp forwarding


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 forwarding.

To display Locator/ID Separation Protocol (LISP) IPv6 endpoint identifier (EID)-prefix forwarding information, use the show ipv6 lisp forwarding command in privileged EXEC mode.

show ipv6 lisp forwarding {eid {local | remote [detail]} | state}

Syntax Description

eid

Displays information related to EID prefixes (local or remote)

local

Displays locally configured EID prefixes.

remote

Displays forwarding action and Locator status bits for dynamically learned EID-prefix blocks, and the number of packets and total bytes encapsulated

detail

(Optional) Displays detailed information associated with each remote EID prefix

state

Displays information about the LISP module forwarding state

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB1

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display information for either local or remote IPv6 EID-prefixes. Local IPv6 EID-prefixes are those for which the router is authoritative and added via the database-mapping command. Remote IPv6 EID-prefixes are those for remote sites and learned dynamically through map-reply information or via map-request messages when the ipv6 etr accept-map-request-mapping command is configured.

Examples

The following sample output from the show ipv6 lisp forwarding eid local command displays local IPv6 EID-prefix information. 


Router# show ipv6 lisp forwarding eid local

Prefix
2001:DB8:AA::/48
2001:DB8:BB::/48

The following sample output from the show ipv6 lisp forwarding eid remote command displays summary remote IPv6 EID-prefix information. Summary information is displayed when the keyword detail is not used. The display shows the EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv6 EID prefix. 


Router# show ipv6 lisp forwarding eid remote

Prefix                 Fwd action  Locator status bits
::/0                   signal      0x00000000
  packets/bytes       0/0
2001:DB8:AB::/48       encap       0x00000001
  packets/bytes      25/2150

The following sample output from the show ipv6 lisp forwarding eid remote detail command displays detailed remote IPv6 EID-prefix information by adding the detail keyword. The display shows the EID-prefix, associated locator status bits, and total encapsulated packets/bytes for each remote IPv6 EID prefix. 


Router# show ipv6 lisp forwarding eid remote detail

Prefix                 Fwd action  Locator status bits
::/0                   signal      0x00000000
  packets/bytes       0/0
  path list 0729CE78, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14)
  1 path
    path 0729D4E0, path list 0729CE78, share 1/1, type attached prefix, for IPv6
    attached to LISP0, adjacency glean for LISP0
  1 output chain
  chain[0]:  glean for LISP0
2001:DB8:AB::/48       encap       0x00000001
  packets/bytes      25/2150
  path list 06BFA050, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14): 10.0.0.6
  1 path
    path 06E8C5B0, path list 06BFA050, share 100/100, type attached nexthop, for IPv6
    nexthop 10.0.0.6 LISP0, adjacency IPV6 midchain out of LISP0, addr 10.0.0.6 07374688
  1 output chain
Prefix                 Fwd action  Locator status bits
  chain[0]:  IPV6 midchain out of LISP0, addr 10.0.0.6 07374688 IP adj out of Ethernet0/0, addr 10.0.0.2 0620D8A8

The following sample output from the show ipv6 lisp forwarding state command displays detailed information about the state of the LISP process forwarding state. (Both IPv4 and IPv6 information is presented). 


Router# show ipv6 lisp forwarding state

LISP forwarding state for EID table IPv4:Default
  EID VRF                    Default (0x0)
    IPv4
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv4:Default
      ALT table              <null>
      Locator status bits    0x00000001
    IPv6
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv6:Default
      ALT table              <null>
      Locator status bits    0x00000001
    RLOC transport VRF       Default (0x0)
      IPv4 RLOC table        IPv4:Default
      IPv6 RLOC table        IPv6:Default
    LISP virtual interface   LISP0

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

ipv6 lisp etr accept-map- request-mapping

Configures an ETR to cache IPv6 mapping data contained in a map-request message.

show ipv6 lisp map-cache

Displays the current dynamic and static IPv6 EID-to-RLOC map-cache entries.

show lisp instance-id ipv6 forwarding

To display Locator/ID Separation Protocol (LISP) IPv6 endpoint identifier (EID)-prefix forwarding information, use the show lisp instance-id [0-16777200] forwarding command in privileged EXEC mode.

show lisp instance-id [0-16777200] ipv6 forwarding { eid { local | remote [detail] } | state }

Syntax Description

eid

Displays information related to EID prefixes (local or remote)

local

Displays locally configured EID prefixes.

remote

Displays forwarding action and Locator status bits for dynamically learned EID-prefix blocks, and the number of packets and total bytes encapsulated

detail

(Optional) Displays detailed information associated with each remote EID prefix

state

Displays information about the LISP module forwarding state

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display information for either local or remote IPv6 EID-prefixes. Local IPv6 EID-prefixes are those for which the router is authoritative and added via the database-mapping command. Remote IPv6 EID-prefixes are those for remote sites and learned dynamically through map-reply information or via map-request messages when the ipv6 etr accept-map-request-mapping command is configured.

Examples

The following sample output from the show lisp instance-id [0-16777200] ipv6forwarding eid local command displays local IPv6 EID-prefix information. 


Router# show lisp instance-id [0-16777200] ipv6 forwarding eid local

Prefix
2001:DB8:AA::/48
2001:DB8:BB::/48

The following sample output from the show lisp instance-id [0-16777200] forwarding eid remote command displays summary remote IPv6 EID-prefix information. Summary information is displayed when the keyword detail is not used. The display shows the EID prefix, associated locator status bits, and total encapsulated packets and bytes for each remote IPv6 EID prefix. 


Router# show lisp instance-id [0-16777200] ipv6 forwarding eid remote

Prefix                 Fwd action  Locator status bits
::/0                   signal      0x00000000
  packets/bytes       0/0
2001:DB8:AB::/48       encap       0x00000001
  packets/bytes      25/2150

The following sample output from the show lisp instance-id [0-16777200] forwarding eid remote detail command displays detailed remote IPv6 EID-prefix information by adding the detail keyword. The display shows the EID-prefix, associated locator status bits, and total encapsulated packets/bytes for each remote IPv6 EID prefix. 


Router# show lisp instance-id [0-16777200] ipv6 forwarding eid remote detail

Prefix                 Fwd action  Locator status bits
::/0                   signal      0x00000000
  packets/bytes       0/0
  path list 0729CE78, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14)
  1 path
    path 0729D4E0, path list 0729CE78, share 1/1, type attached prefix, for IPv6
    attached to LISP0, adjacency glean for LISP0
  1 output chain
  chain[0]:  glean for LISP0
2001:DB8:AB::/48       encap       0x00000001
  packets/bytes      25/2150
  path list 06BFA050, flags 0x49, 3 locks, per-destination
  ifnums:
   LISP0(14): 10.0.0.6
  1 path
    path 06E8C5B0, path list 06BFA050, share 100/100, type attached nexthop, for IPv6
    nexthop 10.0.0.6 LISP0, adjacency IPV6 midchain out of LISP0, addr 10.0.0.6 07374688
  1 output chain
Prefix                 Fwd action  Locator status bits
  chain[0]:  IPV6 midchain out of LISP0, addr 10.0.0.6 07374688 IP adj out of Ethernet0/0, addr 10.0.0.2 0620D8A8

The following sample output from the show lisp instance-id [0-16777200]forwarding state command displays detailed information about the state of the LISP process forwarding state. (Both IPv4 and IPv6 information is presented). 


Router# show lisp instance-id [0-16777200] ipv6 forwarding state

LISP forwarding state for EID table IPv4:Default
  EID VRF                    Default (0x0)
    IPv4
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv4:Default
      ALT table              <null>
      Locator status bits    0x00000001
    IPv6
      Configured roles       ITR|ETR
      Active roles           ITR|ETR
      EID table              IPv6:Default
      ALT table              <null>
      Locator status bits    0x00000001
    RLOC transport VRF       Default (0x0)
      IPv4 RLOC table        IPv4:Default
      IPv6 RLOC table        IPv6:Default
    LISP virtual interface   LISP0

Related Commands

Command

Description

database-mapping

Configures an IPv6 EID-to-RLOC mapping relationship and its associated traffic policy.

ipv6 lisp etr accept-map- request-mapping

Configures an ETR to cache IPv6 mapping data contained in a map-request message.

show ipv6 lisp map-cache

Displays the current dynamic and static IPv6 EID-to-RLOC map-cache entries.

show ipv6 lisp instance-id


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200].

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show ipv6 lisp instance-id command in privileged EXEC mode.

show ipv6 lisp instance-id iid alt negative-prefix EID-prefix

Syntax Description

iid

EID instance-id.

EID-prefix

IPv4 EID address covered by negative ALT prefix.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB3

This command was introduced.

2.5.1XC

This command was integrated into Cisco IOS XE Release 2.5.1XC.

Usage Guidelines

This command is only used on LISP Map-Server (MS) devices to display the negative prefix hole in the LISP ALT for an EID within a specified instance-id.

Examples

The following sample output from the show ip lisp instance-id command for the instance-id 123 and EID 2001:db8:c::1. 


Router# show ipv6 lisp instance-id 123 alt negative-prefix 2001:db8:c::1
Negative mapping system prefix 2001:DB8:C::/46
Router#

Related Commands

Command

Description

eid-prefix (LISP site)

Configures the EID-prefix associated with a LISP site on a Map-Server as part of the LISP Site configuration process.

show lisp instance-id ipv6 alt

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show lisp instance-id alt command in privileged EXEC mode.

show lisp instance-id alt

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is only used on LISP Map-Server (MS) devices to display the negative prefix hole in the LISP ALT for an EID within a specified instance-id.

Examples

The following sample output from the show ip lisp instance-id command for the instance-id 123 and EID 2001:db8:c::1. 


Router# ow lisp instance-id 123 ipv6 alt negative-prefix 172.16.0.1
Negative mapping system prefix 2001:DB8:C::/46
Router#

Related Commands

Command

Description

eid-prefix (LISP site)

Configures the EID-prefix associated with a LISP site on a Map-Server as part of the LISP Site configuration process.

show ipv6 lisp locator-table


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp locator table.

To display Locator/ID Separation Protocol (LISP) IPv6 configurations associated with a specific locator table, use the show ipv6 lisp locator-table command in privileged EXEC mode.

show ipv6 lisp locator-table {default | vrf vrf-name}

Syntax Description

default

Displays IPv6 LISP information and configuration status related to the default table.

vrf vrf-name

Displays IPv6 LISP information and configuration status related to the specified VRF name.

Command Modes

Privileged EXEC

Command History

Release

Modification

15.1(1)XB6

This command was introduced.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S.

Usage Guidelines

The locator-table command creates an association between a LISP instantiation and a virtual routing and forwarding (VRF) table through which the routing locator address space is reachable. The show ipv6 lisp locator-table command is used to display the IPv6 LISP configuration status for a specific locator table. A locator table can be the default, meaning the global routing table, or a specific VRF.

Examples

The following is sample output from the show ipv6 lisp locator-table command for the VRF named Cust-1: 


Router# show ipv6 lisp locator-table Cust-1 

Information applicable to all EID instances:
  Router-lisp ID:                   1
  Locator table:                    vrf Cust-1
  Ingress Tunnel Router (ITR):      disabled
  Egress Tunnel Router (ETR):       disabled
  Proxy-ITR Router (PITR):          enabled RLOCs: 2001:db8:1:1::1
  Proxy-ETR Router (PETR):          enabled
  Map Server (MS):                  disabled
  Map Resolver (MR):                disabled
  Delegated Database Tree (DDT):    disabled
  ITR Map-Resolver(s):              10.100.1.2
  ITR Solicit Map Request (SMR):    accept and process
    Max SMRs per map-cache entry:   8 more specifics
    Multiple SMR suppression time:  20 secs
  ETR accept mapping data:          disabled, verify disabled
  ETR map-cache TTL:                1d00h
  Locator Status Algorithms:
    RLOC-probe algorithm:           disabled
    LSB reports:                    process
  Map-cache limit:                  1000
  Map-cache activity check period:  60 secs
  Persistent map-cache:             disabled
Router#

Related Commands

Command

Description

locator-table

Configure the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

show ipv6 lisp map-cache


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 map-cache.

To display the current dynamic and static IPv6 endpoint identifier-to-routing locator (EID-to-RLOC) map-cache entries, use the show ipv6 lisp map-cache command in privileged EXEC mode.

show ipv6 lisp map-cache [destination-EID | destination-EID-prefix/ prefix-length | detail]

Syntax Description

destination-EID

(Optional) Destination EID for which to display mapping information.

destination-EID-prefix/prefix-length

(Optional) Destination EID prefix for which to display mapping information.

detail

(Optional) Displays detailed EID-to-RLOC cache mapping information.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB1

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display the current dynamic and static IPv6 EID-to-RLOC map-cache entries. When no IPv6 EID or IPv6 EID-prefix is specified, summary information is listed for all current dynamic and static IPv6 EID-to-RLOC map-cache entries. When an IPv6 EID or IPv6 EID prefix is included, information is listed for the longest-match lookup in the cache. When the detail option is used, detailed (rather than summary) information related to all current dynamic and static IPv4 or IPv6 EID-to-RLOC map-cache entries is displayed.

Examples

The following sample output from the show ipv6 lisp map-cache command (without the use of an IPv6 EID or IPv6 EID-prefix) displays a summary list of current dynamic and static IPv6 EID-to-RLOC map-cache entries. The display shows the IPv6 EID prefix and associated information: 


Router# show ipv6 lisp map-cache

LISP IPv6 Mapping Cache, 2 entries

::/0, uptime: 00:00:26, expires: never, via static
  Negative cache entry, action: send-map-request
2001:DB8:AB::/48, uptime: 00:00:04, expires: 23:59:53, via map-reply, complete
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:04  up           1/100
Router#

The following sample output from the show ipv6 lisp map-cache detail command displays a detailed list of current dynamic and static IPv4 EID-to-RLOC map-cache entries: 


Router# show ipv6 lisp map-cache detail

LISP IPv6 Mapping Cache, 2 entries

::/0, uptime: 00:00:52, expires: never, via static
  State: send-map-request, last modified: 00:00:52, map-source: local
  Idle, Packets out: 0
  Negative cache entry, action: send-map-request
2001:DB8:AB::/48, uptime: 00:00:30, expires: 23:59:27, via map-reply, complete
  State: complete, last modified: 00:00:30, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:30  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

The following sample output from the show ipv6 lisp map-cache command with a specific IPv6 EID prefix displays detailed information associated with that IPv6 EID prefix entry. 


Router# show ipv6 lisp map-cache 2001:DB8:AB::/48

LISP IPv6 Mapping Cache, 2 entries

2001:DB8:AB::/48, uptime: 00:01:02, expires: 23:58:54, via map-reply, complete
  State: complete, last modified: 00:01:02, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:01:02  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

Related Commands

Command

Description

show ipv6 lisp forwarding

Displays LISP local or remote IPv6 EID-prefix information.

show lisp instance-id ipv6 map-cache

To display the current dynamic and static IPv6 endpoint identifier-to-routing locator (EID-to-RLOC) map-cache entries, use the show lisp instance-id [0-16777200] ipv6 map-cache command in privileged EXEC mode.

show lisp isntance-id [0-16777200] ipv6 map-cache [ destination-EID | destination-EID-prefix / prefix-length | detail ]

Syntax Description

destination-EID

(Optional) Destination EID for which to display mapping information.

destination-EID-prefix/prefix-length

(Optional) Destination EID prefix for which to display mapping information.

detail

(Optional) Displays detailed EID-to-RLOC cache mapping information.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display the current dynamic and static IPv6 EID-to-RLOC map-cache entries. When no IPv6 EID or IPv6 EID-prefix is specified, summary information is listed for all current dynamic and static IPv6 EID-to-RLOC map-cache entries. When an IPv6 EID or IPv6 EID prefix is included, information is listed for the longest-match lookup in the cache. When the detail option is used, detailed (rather than summary) information related to all current dynamic and static IPv4 or IPv6 EID-to-RLOC map-cache entries is displayed.

Examples

The following sample output from the show lisp instance-id [0-16777200] ipv6 map-cache command (without the use of an IPv6 EID or IPv6 EID-prefix) displays a summary list of current dynamic and static IPv6 EID-to-RLOC map-cache entries. The display shows the IPv6 EID prefix and associated information: 


Router# show ipv6 lisp instance-id [0-16777200] map-cache

LISP IPv6 Mapping Cache, 2 entries

::/0, uptime: 00:00:26, expires: never, via static
  Negative cache entry, action: send-map-request
2001:DB8:AB::/48, uptime: 00:00:04, expires: 23:59:53, via map-reply, complete
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:04  up           1/100
Router#

The following sample output from the show lisp instance-id [0-16777200] ipv6 map-cache detail command displays a detailed list of current dynamic and static IPv4 EID-to-RLOC map-cache entries: 


Router# show lisp instance-id [0-16777200] ipv6 map-cache detail

LISP IPv6 Mapping Cache, 2 entries

::/0, uptime: 00:00:52, expires: never, via static
  State: send-map-request, last modified: 00:00:52, map-source: local
  Idle, Packets out: 0
  Negative cache entry, action: send-map-request
2001:DB8:AB::/48, uptime: 00:00:30, expires: 23:59:27, via map-reply, complete
  State: complete, last modified: 00:00:30, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:00:30  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

The following sample output from the show lisp instance-id [0-16777200] ipv6 map-cache command with a specific IPv6 EID prefix displays detailed information associated with that IPv6 EID prefix entry. 


Router# show lisp instance-id [0-16777200] ipv6 map-cache 2001:DB8:AB::/48

LISP IPv6 Mapping Cache, 2 entries

2001:DB8:AB::/48, uptime: 00:01:02, expires: 23:58:54, via map-reply, complete
  State: complete, last modified: 00:01:02, map-source: 10.0.0.6
  Active, Packets out: 0
  Locator   Uptime    State      Pri/Wgt
  10.0.0.6  00:01:02  up           1/100
    Last up-down state change:         never, state change count: 0
    Last priority / weight change:     never/never
    RLOC-probing loc-status algorithm:
      Last RLOC-probe sent:            never

Related Commands

Command

Description

show ipv6 lisp forwarding

Displays LISP local or remote IPv6 EID-prefix information.

show ipv6 lisp route-import database


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 route-import database.

To display the current IPv6 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define local endpoint identifier (EID) database entries, use the show ipv6 lisp route-import database command in privileged EXEC mode.

show ipv6 lisp [ router-lisp-id ] [ instance-id iid ] route-import database [ ipv6-address | ipv6-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520.

instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv6-address

(Optional) IPv6 address to longest match against imported routes.

ipv6-prefix

(Optional) IPv6 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

15.4(2)T

This command was introduced.

3.12.0S

This command was integrated into Cisco IOS XE Release 3.12.0S.

Usage Guidelines

When the optional lisp-instantiation-number argument is used, the show ip lisp route-import database command displays the IPv6 LISP configuration status for the specified router LISP instantiation. When used without the optional lisp-instantiation-number argument, the command displays the IPv6 LISP configuration status for the local device for the default router LISP instantiation.

It is mandatory to use the iid argument with the instance-id keyword. When the optional instance-id keyword is used with the iid argument, the show ip lisp route-import database command displays the IPv6 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv6 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv6-address or ipv6-prefix arguments, the show ip lisp route-import database command displays the IPv6 LISP configuration status for the local device for IPv6 address to longest match against imported routes or IPv6 imported route prefix respectively. When used without either of the optional ipv6-address or ipv6-prefix arguments, the command displays the IPv6 LISP configuration status for the local device for all IPv6 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv6 RIB routes imported into LISP to define local EID database entries using the show ipv6 lisp route-import database command: 

Device# show ipv6 lisp route-import database

LISP IPv6 imported routes for EID-table default (IID 0)
Config: 1, Entries: 4 (limit 1000)
Prefix                      Uptime     Source  Map-cache   State
2001:db8:10:1::/64          00:56:26   ospf 10 installed
2001:db8:ab:cd:1::/80       00:17:52   ospf 10 installed
2001:db8:ab:cd:2::/80       00:17:52   ospf 10 installed
2001:db8:ab:cd:3::/80       00:17:52   ospf 10 installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map-cache.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map-cache.

show lisp instance-id ipv6 route-import database

To display the current IPv6 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define local endpoint identifier (EID) database entries, use the show lisp instance-id [0-16777200] ipv6 route-import database command in privileged EXEC mode.

show lisp instance-id [0-16777200] [ router-lisp-id ] [ instance-id iid ] ipv6 route-import database [ ipv6-address | ipv6-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520.

instance-id iid

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv6-address

(Optional) IPv6 address to longest match against imported routes.

ipv6-prefix

(Optional) IPv6 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

When the optional lisp-instantiation-number argument is used, the show lisp instance-id [0-16777200] ipv6 route-import database command displays the IPv6 LISP configuration status for the specified router LISP instantiation. When used without the optional lisp-instantiation-number argument, the command displays the IPv6 LISP configuration status for the local device for the default router LISP instantiation.

It is mandatory to use the iid argument with the instance-id keyword. When the optional instance-id keyword is used with the iid argument, the show lisp instance-id [0-16777200] ipv6 route-import database command displays the IPv6 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv6 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv6-address or ipv6-prefix arguments, the show lisp instance-id [0-16777200] ipv6 route-import database command displays the IPv6 LISP configuration status for the local device for IPv6 address to longest match against imported routes or IPv6 imported route prefix respectively. When used without either of the optional ipv6-address or ipv6-prefix arguments, the command displays the IPv6 LISP configuration status for the local device for all IPv6 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv6 RIB routes imported into LISP to define local EID database entries using the show lisp instance-id [0-16777200] ipv6 route-import database command: 

Device# show lisp instance-id [0-16777200] ipv6 route-import database

LISP IPv6 imported routes for EID-table default (IID 0)
Config: 1, Entries: 4 (limit 1000)
Prefix                      Uptime     Source  Map-cache   State
2001:db8:10:1::/64          00:56:26   ospf 10 installed
2001:db8:ab:cd:1::/80       00:17:52   ospf 10 installed
2001:db8:ab:cd:2::/80       00:17:52   ospf 10 installed
2001:db8:ab:cd:3::/80       00:17:52   ospf 10 installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map-cache.

show ipv6 lisp route-import map-cache

Displays the current IPv6 RIB routes imported into LISP to define EID address space in map-cache.

show ipv6 lisp route-import map-cache


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 route-import map-cache.

To display the current IPv6 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define endpoint identifier (EID) address space in map cache, use the show ipv6 lisp route-import map-cache command in privileged EXEC mode.

show ipv6 lisp [ router-lisp-id ] [ instance-id iid ] route-import map-cache [ ipv6-address | ipv6-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520.

instance-id i-id

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv6-address

(Optional) IPv6 address to longest match against imported routes.

ipv6-prefix

(Optional) IPv6 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

15.4(2)T

This command was introduced.

3.12.0S

This command was integrated into Cisco IOS XE Release 3.12.0S.

Usage Guidelines

When the optional lisp-instantiation-number argument is used, the show ipv6 lisp route-import map-cache command displays the IPv6 LISP configuration status for the specified router LISP instantiation. When used without the optional lisp-instantiation-number argument, the command displays the IPv6 LISP configuration status for the local device for the default router LISP instantiation.

It is mandatory to use the iid argument with the instance-id keyword. When the optional instance-id keyword is used with the iid argument, the show ipv6 lisp route-import map-cache command displays the IPv6 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv6 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv6-address or ipv6-prefix arguments, the show ipv6 lisp route-import map-cache command displays the IPv6 LISP configuration status for the local device for IPv6 address to longest match against imported routes or IPv6 imported route prefix respectively. When used without either of the optional ipv6-address or ipv6-prefix arguments, the command displays the IPv6 LISP configuration status for the local device for all IPv6 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv6 RIB routes imported into LISP to define EID address space in map-cache using the show ipv6 lisp route-import map-cache command: 

Device# show ipv6 lisp route-import map-cache

LISP IPv6 imported routes for EID-table default (IID 0)
Config: 1, Entries: 4 (limit 1000)
Prefix                     Uptime     Source     Map-cache  State
2001:db8:ab:cd::/64        00:19:50   bgp 64496  installed
2001:db8:cd::/48           00:25:32   bgp 64496  installed
2001:db8:ce::/48           00:27:11   bgp 64496  installed
2001:db8:cf::/48           00:12:12   bgp 64496  installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map-cache.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show lisp instance-id ipv6 route-import map-cache

To display the current IPv6 Routing Information Base (RIB) routes imported into Locator ID Separation Protocol (LISP) to define endpoint identifier (EID) address space in map cache, use the show lisp instance-id [0-16777200] ipv6 route-import map-cache command in privileged EXEC mode.

show lisp [ router-lisp-id ] [ instance-id iid ] ipv6 route-import map-cache [ ipv6-address | ipv6-prefix | eid-table { vrf eid-table-vrf-name | default } ]

Syntax Description

router-lisp-id

(Optional) Router LISP ID. Range: 0 to 65520.

instance-id i-id

(Optional) Limits the output of the command to the referenced instance ID. Range: 0 to16777214
ipv6-address

(Optional) IPv6 address to longest match against imported routes.

ipv6-prefix

(Optional) IPv6 imported route prefix.

eid-table

(Optional) Limits the output of the command to the referenced EID table.
vrf eid-table-vrf-name

VRF name.
default

Default VRF.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

\[]÷

Usage Guidelines

When the optional lisp-instantiation-number argument is used, the show lisp instance-id [0-16777200] ipv6 route-import map-cache command displays the IPv6 LISP configuration status for the specified router LISP instantiation.

When used without the optional lisp-instantiation-number argument, the command displays the IPv6 LISP configuration status for the local device for the default router LISP instantiation.

It is mandatory to use the iid argument with the instance-id keyword. When the optional instance-id keyword is used with the iid argument, the show instance-id [0-16777200] ipv6 lisp route-import map-cache command displays the IPv6 LISP configuration status for the local device for the specified LISP instance ID associated with a VRF. When used without the optional instance-id keyword, the command displays the IPv6 LISP configuration status for the local device for all LISP configurations present on the device.

When used with the optional ipv6-address or ipv6-prefix arguments, the show lisp instance-id [0-16777200] ipv6 route-import map-cache command displays the IPv6 LISP configuration status for the local device for IPv6 address to longest match against imported routes or IPv6 imported route prefix respectively. When used without either of the optional ipv6-address or ipv6-prefix arguments, the command displays the IPv6 LISP configuration status for the local device for all IPv6 addresses or prefixes that are configured on the device.

Examples

The following example shows how to display the current IPv6 RIB routes imported into LISP to define EID address space in map-cache using the show lisp instance-id [0-16777200] ipv6 route-import map-cache command: 

Device# show lisp instance-id ipv6 route-import map-cache

LISP IPv6 imported routes for EID-table default (IID 0)
Config: 1, Entries: 4 (limit 1000)
Prefix                     Uptime     Source     Map-cache  State
2001:db8:ab:cd::/64        00:19:50   bgp 64496  installed
2001:db8:cd::/48           00:25:32   bgp 64496  installed
2001:db8:ce::/48           00:27:11   bgp 64496  installed
2001:db8:cf::/48           00:12:12   bgp 64496  installed

Related Commands

Command

Description

show ip lisp route-import database

Displays the current IPv4 RIB routes imported into LISP to define local EID database entries.

show ip lisp route-import map-cache

Displays the current IPv4 RIB routes imported into LISP to define EID address space in map-cache.

show ipv6 lisp route-import database

Displays the current IPv6 RIB routes imported into LISP to define local EID database entries.

show ipv6 lisp statistics


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv6 statistics.

To display Locator/ID Separation Protocol (LISP) IPv6 address-family statistics, use the show ipv6 lisp statistics command in privileged EXEC mode.

show ipv6 lisp statistics

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB1

This command was introduced.

Cisco IOS XE Release 2.5.1XA

This command was integrated into Cisco IOS XE Release 2.5.1XA.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used to display IPv6 LISP statistics related to packet encapsulations, de-encapsulations, map requests, map replies, map registers, and other LISP-related packets.

Examples

The following sample output from the show ipv6 lisp statistics command displays the current LISP IPv6 address family statistics. The output varies, depending on the LISP features configured and the state of various LISP components. 


Router# show ipv6 lisp statistics

LISP Statistics - last cleared: 00:56:49
Control Packets:
  Map-Requests in/out:                      0/15
    Encapsulated Map-Requests in/out:       0/15
    RLOC-probe Map-Requests in/out:         0/0
  Map-Reply records in/out:                 4/0
    Authoritative records in/out:           4/0
    Non-authoritative records in:           0
    Negative records in:                    0
    RLOC-probe records in/out:              1/0
  Map-Registers out:                        114
Errors:
  Map-Request format errors:                0
  Map-Reply format errors:                  0
  Map-Reply spoof alerts:                   0
  Mapping record TTL alerts:                0
Cache Related:
  Cache entries created/deleted:            8/7
  Number of EID-prefixes in map-cache:      3
  Number of negative entries in map-cache:  2
  Total number of RLOCs in map-cache:       2
  Average RLOCs per EID-prefix:             2
Forwarding:
  Number of data signals processed:         0 (+ dropped 0)
  Number of reachability reports:           0 (+ dropped 0)

Related Commands

Command

Description

show ipv6 lisp

Displays the IPv6 LISP configuration status for the local device.

show lisp ipv6 statistics

To display Locator/ID Separation Protocol (LISP) IPv6 address-family statistics, use the show lisp ipv6 statistics command in privileged EXEC mode.

show lisp ipv6 statistics

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is used to display IPv6 LISP statistics related to packet encapsulations, de-encapsulations, map requests, map replies, map registers, and other LISP-related packets.

Examples

The following sample output from the show lisp ipv6 statistics command displays the current LISP IPv6 address family statistics. The output varies, depending on the LISP features configured and the state of various LISP components. 


Router# Router# show ipv6 lisp statistics
LISP Statistics - last cleared: 00:56:49
Control Packets:
Map-Requests in/out: 0/15
Encapsulated Map-Requests in/out: 0/15
RLOC-probe Map-Requests in/out: 0/0
Map-Reply records in/out: 4/0
Authoritative records in/out: 4/0
Non-authoritative records in: 0
Negative records in: 0
RLOC-probe records in/out: 1/0
Map-Registers out: 114
Errors:
Map-Request format errors: 0
Map-Reply format errors: 0
Map-Reply spoof alerts: 0
Mapping record TTL alerts: 0
Cache Related:
Cache entries created/deleted: 8/7
Number of EID-prefixes in map-cache: 3
Number of negative entries in map-cache: 2
Total number of RLOCs in map-cache: 2
Average RLOCs per EID-prefix: 2
Forwarding:
Number of data signals processed: 0 (+ dropped 0)
Number of reachability reports: 0 (+ dropped 0)

Related Commands

Command

Description

show ipv6 lisp

Displays the IPv6 LISP configuration status for the local device.

show lisp

To display summary information related to the Locator/ID Separation Protocol (LISP) configuration, use the show lisp command in privileged EXEC mode.

show lisp [router-lisp-id]

Syntax Description

router-lisp-id

(Optional) Router LISP instantiation ID. Valid values are 0 to 15.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB6

This command was introduced.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M and modified to include the locator-table keyword.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S and modified to include the locator-table keyword.

Usage Guidelines

When used without the optional router LISP ID value, the show lisp command displays summary information about the default router LISP process, including any associated locator table or EID instance IDs. When the optional router-lisp-id argument is used, the show lisp command displays the summary locator table or EID instance IDs related to the specified router LISP instantiation.

Examples

The following is sample output from the show lisp command: 


Router# show lisp 

Router-lisp ID:        0
Locator table:         default
EID instance count:    1
Router#

The following is sample output from the show lisp command when using the optional router LISP ID (and a configuration exists for this router LISP instantiation): 


Router# show lisp 1

Router-lisp ID:        1
Locator table:         vrf Cust-1
EID instance count:    1
Router#

Related Commands

Command

Description

router lisp

Configures a LISP instantiation on the device.

show lisp ddt

To display the configured DDT root(s) and/or DDT delegation nodes on a router enabled for LISP DDT, use the show lisp ddt command in privileged EXEC mode.

show lisp ddt [negative-prefix | referral-cache | {eid-address | iid} | queue]

Syntax Description

negative-prefix

(Optional) Displays the DDT node delegation hole.
referral-cache

(Optional) Displays the DDT referral cache contents.
eid-address

(Optional) IPv4/IPv6 EID address or prefix.
iid

(Optional) EID instance ID.
queue

(Optional) Displays the DDT request queue.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.3(1)T

This command was introduced.

Cisco IOS XE Release 3.8S

This command was integrated into Cisco IOS XE Release 3.8S.

Usage Guidelines

Use this command to display the configured DDT root(s) and/or DDT delegation nodes on a device that is enabled for LISP DDT node.

Examples

The following example shows the output of the show lisp ddt command for a LISP DDT node configured as a map resolver that refers to three LISP DDT root nodes with locators (10.1.1.1, 10.2.1.1, and 10.3.1.1) and configured as a map server for the EID prefixes 172.16.0.0/16 and 2001:db8:eeee::/48 in the default (0) instance ID for its own locator (10.1.10.10) and a peer map server locator (10.2.10.10). 

Device> enable
Device# show lisp ddt

LISP-DDT Configuration in VRF "default"
  DDT IP Map-Resolver configured
  DDT IPv6 Map-Resolver configured
  DDT IP Map-Server configured
  DDT IPv6 Map-Server configured
  Configured DDT roots: 10.1.1.1  10.2.1.1  10.3.1.1    
  Configured DDT delegated nodes/map-servers: 
    [0] 172.16.0.0/16 -> 10.1.10.10, p/w: 0/0, map-server-peer
    [0] 172.16.0.0/16 -> 10.2.10.10, p/w: 0/0, map-server-peer
    [0] 2001:db8:eeee::/48 -> 10.1.10.10, p/w: 0/0, map-server-peer
    [0] 2001:db8:eeee::/48 -> 10.2.10.10, p/w: 0/0, map-server-peer

  Configured authoritative EID-prefixes: 
    [0] 172.16.0.0/16
    [0] 2001:db8:eeee::/48

Related Commands

Command

Description

clear lisp ddt

Clears the DDT referral cache stored on a DDT-enabled map resolver.

ddt

Configures a device to enable LISP DDT functionality.

show lisp decapsulation filter

To display source Routing Locator (RLOC) addresses for specified parameters and the corresponding RLOC address configuration method, use the show lisp decapsulation filter command in privileged EXEC mode.

show lisp decapsulation filter [ IPv4-rloc-address | IPv6-rloc-address] [ eid-table eid-table-vrf | instance-id iid]

Syntax Description

IPv4-rloc-address

(Optional) Source RLOC address.

If you want to know how a specific IPv4 RLOC address was configured, use this option.

IPv6-rloc-address

(Optional) Source RLOC address.

If you want to know how a specific IPv6 RLOC address was configured, use this option.

eid-table eid-table-vrf

(Optional) Specifies the EID table and the associated VRF.

Source RLOC addresses corresponding to the VRF will be displayed.

instance-id iid

(Optional) Specifies the instance ID.

Source RLOC addresses corresponding to the specified instance ID will be displayed.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.5(1)T

This command was introduced.

Cisco IOS XE Release 3.14S

This command was integrated into Cisco IOS XE Release 3.14S.

Usage Guidelines

Examples

The following sample output from the show lisp decapsulation filter command displays source RLOC address configuration details for a specific EID Instance ID: 


Device# show lisp decapsulation filter instance-id 0

LISP decapsulation filter for EID-table default (IID 0), 3 entries

Source RLOC     Added by
10.0.0.1         Config
10.0.0.5        	209.165.200.230 209.165.200.232
10.0.0.6        	Config 209.165.200.230

The RLOC address configuration details (whether it is manually configured or discovered) on a (P)xTR is displayed in the above table.

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.

show lisp instance-id

To display the negative prefix hole in the LISP ALT for an EID within a specified instance-id, use the show lisp instance-id [0-16777200] command in privileged EXEC mode.

show lisp instance-id

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

Cisco IOS XE Dublin 17.11.1a

This command was introduced.

Usage Guidelines

This command is only used on LISP Map-Server (MS) devices to display the negative prefix hole in the LISP ALT for an EID within a specified instance-id.

Examples

The following sample output from the show ip lisp instance-id command for the instance-id 123 and EID 2001:db8:c::1.


Router# Router# show ipv6 lisp instance-id 123 alt negative-prefix 2001:db8:c::1
Negative mapping system prefix 2001:DB8:C::/46
Router#

Related Commands

Command

Description

eid-prefix (LISP site)

Configures the EID-prefix associated with a LISP site on a Map-Server as part of the LISP Site configuration process.

show lisp locator-table

To display summary information related to the Locator/ID Separation Protocol (LISP) configuration, use the show lisp locator-table command in privileged EXEC mode.

show lisp locator-table {default | vrf vrf-name}

Syntax Description

default

Displays summary information related to the default table.

vrf vrf-name

Displays summary information related to the specified virtual routing and forwarding (VRF) table.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB6

This command was introduced.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M and modified to include the locator-table keyword.

Cisco IOS XE Release 3.3S

This command was integrated into Cisco IOS XE Release 3.3S and modified to include the locator-table keyword.

Usage Guidelines

The locator-table command creates an association between a LISP instantiation and a VRF table through which the routing locator address space is reachable. When used with the default keyword, the show lisp locator-table command displays summary information about the default locator table, including any associated locator table or EID instance IDs. When the optional vrf vrf-name keyword and argument is included, the show lisp command displays summary information related to the specified locator table, including any associated locator table or EID instance IDs.

Examples

The following is sample output from the show lisp locator-table default command: 


Router# show lisp locator-table default  

Router-lisp ID:        0
Locator table:         default
EID instance count:    1
Router#

The following is sample output from the show lisp locator-table vrf command when using the locator-table VRF option (and a configuration exists for the specified locator table and VRF): 


Router# show lisp locator-table vrf Cust-1   

Router-lisp ID:        1
Locator table:         vrf Cust-1
EID instance count:    1
Router#

Related Commands

Command

Description

locator-table

Configures the association of a VRF table through which the routing locator address space is reachable to a router LISP instantiation.

show lisp site


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp server.

To display configured LISP sites on a Locator/ID Separation Protocol (LISP) map server, use the show lisp site command in privileged EXEC mode.

show lisp site [IPv4-dest-EID | IPv4-dest-EID-prefix | IPv6-dest-EID | IPv6-dest-EID-prefix]| [name site-name ]| [detail]

Syntax Description

IPv4-dest-EID

(Optional) Displays LISP site information matching this destination endpoint identifier (EID).

IPv4-dest-EID-prefix

(Optional) Displays LISP site information matching this destination EID prefix.

IPv6-dest-EID

(Optional) Displays LISP site information matching this destination EID.

IPv6-dest-EID-prefix

(Optional) Displays LISP site information matching this destination EID prefix.

name site-name

(Optional) Displays LISP site information matching this site name.

detail

(Optional) Increases the detail of all displayed LISP site information when no other parameters are used.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.1(1)XB2

This command was introduced.

Cisco IOS XE Release 2.5.1XB

This command was integrated into Cisco IOS XE Release 2.5.1XB.

Cisco IOS XE Release 3.3.0S

This command was integrated into Cisco IOS XE Release 3.3.0S.

15.1(4)M

This command was integrated into Cisco IOS Release 15.1(4)M.

Usage Guidelines

This command is used on a LISP map server to display information related to configured LISP sites. The displayed output indicates, among other things, whether a site is actively registered.

When the base form of the command is used (show lisp site ), summary information related to all configured LISP sites is displayed. When the IPv4-dest-EID form is used, a longest match is done to return the site with the best matching EID prefix and the displayed information applies specifically to that LISP site. When the IPv4-dest-EID-prefix form is used, an exact match is done to return the site configured with the EID prefix and the displayed information applies specifically to that LISP site. When the site-name form is used, the displayed information contains all EID prefixes configured for the named LISP site. When the detail keyword is added, all available details for the specific command form are presented.

Examples

The following sample output from the show lisp site command displays summary information related to all configured LISP sites: 


Map-Server# show lisp site

LISP Site Registration Information

Site Name      Last      Up   Who Last             EID Prefix
               Register       Registered
site1-xtr      00:00:04  yes  10.0.2.1             192.168.1.0/24
               00:00:04  yes  10.0.2.1             2001:DB8:A::/48
site2-xtr      00:00:35  yes  10.0.9.1             192.168.11.0/24
               00:00:35  yes  10.0.10.1            2001:DB8:B::/48

The following sample output from the show lisp site dmm-xtr-1 command displays detailed information related specifically to the LISP sites dmm-xtr-1. 


Map-Server# show lisp site name site1-xtr

Description: LISP Site 1
Allowed configured locators: any
Allowed EID-prefixes:
  EID-prefix: 192.168.1.0/24
    First registered:     00:17:15
    Routing table tag:    0x0
    ETR 10.0.3.1, last registered 00:00:01, no proxy-reply
      Locator   Local  State      Pri/Wgt
      10.0.2.1  no     up           1/50
      10.0.3.1  yes    up           1/50
    ETR 10.0.2.1, last registered 00:00:24, no proxy-reply
      Locator   Local  State      Pri/Wgt
      10.0.2.1  yes    up           1/50
      10.0.3.1  no     up           1/50
  EID-prefix: 2001:DB8:A::/48
    First registered:     00:17:14
    Routing table tag:    0x0
    ETR 10.0.2.1, last registered 00:00:23, no proxy-reply
      Locator   Local  State      Pri/Wgt
      10.0.2.1  yes    up           1/50
      10.0.3.1  no     up           1/50
    ETR 10.0.3.1, last registered 00:00:58, no proxy-reply
      Locator   Local  State      Pri/Wgt
      10.0.2.1  no     up           1/50
      10.0.3.1  yes    up           1/50

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.

show lisp site rloc members


Note

This command has currently been deprecated and when entered, it will automatically direct you to the updated command and its respective output. This information will be provided through a banner that will appear on screen when you run the previous command. The revised option for this command is show lisp instance-id [0-16777200] ipv4 server rloc for IPv4 and show lisp instance-id [0-16777200] ipv6 server rloc for IPv6.

To display Routing Locator (RLOC) address configuration details (such as RLOC endpoint identifier [EID] instance membership registration) for a Locator/ID Separation Protocol (LISP) site, use the show lisp site rloc members command in privileged EXEC mode.

show lisp site rloc members [ registrations [ rloc-address] | instance-id iid]

Syntax Description

registrations

(Optional) Specifies that RLOC EID instance membership registration details be displayed.

rloc-address

(Optional) IPv4 or IPv6 RLOC address.

If you want to view details for a specific RLOC address, you need to use this option.

instance-id iid

(Optional) Specifies the instance ID for which the RLOC addresses will be displayed.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.5(1)T

This command was introduced.

Cisco IOS XE Release 3.14S

This command was integrated into Cisco IOS XE Release 3.14S.

Usage Guidelines

Examples

The following sample output from the show lisp site rloc members command displays RLOC address configuration details for the instance ID 0: 


Device# show lisp site rloc members

LISP RLOC membership for EID table default (IID 0), 2 entries

RLOC                                  Origin                       Valid
10.0.1.2                              registration                 Yes
10.0.2.2                              config & registration        Yes

The Origin column displays configuration details of the RLOC member. If an RLOC address is manually configured, automatically gleaned from received registrations, or both, the details are displayed. The Valid column shows whether the RLOC is a valid member that is distributed to (P)xTRs. A listed RLOC may not be valid if it is gleaned from registrations but the “override” option is used in the “modify-discovered” configuration and the specified locator-set does not include the RLOC.

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.

show lisp session

To display a current list of reliable transport (TCP) sessions, use the show lisp session command in privileged EXEC mode.

show lisp [ session [ established] | vrf [ vrf-name [ session [ peer-address]]]]

Syntax Description

session

(Optional) Specifies that reliable transport session information is displayed.

If there are multiple transport sessions due to multiple roles, you can view information for all the sessions.

established

(Optional) Displays transport session information for established connections.

vrf vrf-name

(Optional) Specifies the VRF instance.

The transport session information for this VRF instance will be displayed.

peer-address

(Optional) IPv4 or IPv6 peer address.

A transport session is established between a LISP (P)xTR and each Map-Server it peers with, and is used to communicate RLOC membership information in support of the LISP data plane security feature.

Command Modes

Privileged EXEC (#)

Command History

Release

Modification

15.5(1)T

This command was introduced.

Cisco IOS XE Release 3.14S

This command was integrated into Cisco IOS XE Release 3.14S.

Usage Guidelines

Examples

The following sample output from the show lisp session command displays transport session information for a LISP VRF instance: 


Device# show lisp session

Sessions for VRF default, total: 8, established: 7
Peer                           State      Up/Down        In/Out    Users
2001:DB8:A:1::2                Up         00:04:13        2/7      2
2001:DB8:A:2::2                Up         00:04:13        2/7      2
2001:DB8:A:3::2                Up         00:03:53        2/7      2
2001:DB8:B:1::2                Up         00:04:04        2/6      2
2001:DB8:B:2::2                Init       never           0/0      1
2001:DB8:C:1::2                Up         00:03:55        2/6      2
2001:DB8:C:2::2                Up         00:03:54        2/6      2
2001:DB8:E:F::2                Up         00:04:04        6/19     4

Related Commands

Command

Description

show ip lisp

Displays the IPv4 LISP configuration status for the local device.