Active Zones

Regular Zones

You can view all the Regular Zones that are configured on SAN Controller. Choose SAN > Active Zones > Regular Zones tab. The following table describes the fields that appear on this screen.

Table 1.

Field

Description

Group

Specifies the name of the fabric.

VSANS

Specifies the number of VSANS configured on this Zone.

Zone Sets

Specifies the name of zone set to which the zone belongs.

Zone

Displays the zone under which this member is present.

Note

 

You cannot save any changes made to topology layout from this screen.

Switch Interface/WWN

Specifies the switch interface or WWN of the switch that the zone member is attached to.

PWWN

Specifies the associated pWWN to the switch.

Member Name

Displays the name of the zone member.

Zoned By

Displays the type of zoning. You can search by type of zoning such as WWN, FCID, fcAlias, or iSCSI.

IVR Zones

You can view all the IVR Zones configured on SAN Controller. Choose SAN > Active Zones > IVR Zones tab. The following table describes the fields that appear on this screen.

Table 2.

Field

Description

Group

Specifies the fabric name.

VSANS

Specifies the number of VSANS configured on this Zone.

Zone Sets

Specifies the name of Zone set to which the zone belongs.

Zone

Displays the zone under which this member is present.

Switch Interface/WWN

Specifies the switch interface or WWN of the switch that the zone member is attached to.

PWWN

Specifies the associated pWWN to the switch.

Member Name

Displays the name of the zone member.

Zoned By

Displays the type of zoning. You can search by type of zoning such as WWN, FCID, fcAlias, or iSCSI.