Accessory Kit Contents

Accessory Kit Contents

This appendix lists and illustrates the Cisco MDS 9700 Series accessory kit contents (part number 53-4093-XX).

Table 1. Cisco MDS 9700 Switch Accessory Kit Contents
Part Number Illustration Description Quantity
69-2503-XX Support rack-mount bracket kit (includes the following parts) 1 kit
12-24 x 3/4-in. Phillips screws 20 per kit
M6 x19-mm Phillips screws 20 per kit
10-32 x 3/4-inch screws 20 per kit
Support rack-mount bracket 2 per kit
800-05097-XX Console cable connector kit (includes the following parts) 2 kits
RJ-45 rollover cable 1 per kit
DB-9F/RJ-45F PC terminal 1 per kit
RJ-45/DSUB F/F adapter 1 per kit
R-J45/DSUB R/P adapter 1 per kit
DSUB screw lock kit 1 per kit
69-1815-XX Ground lug kit (includes the following parts) 1 kit
Two-hole lug 1 per kit
M4 x 8-mm Phillips pan-head screws 2 per kit
79-0087-XX ESD wrist strap 1 per kit
700-29059-01 SFP Extractor 1 per kit
78-21186-XX Not applicable Product Documentation Pointer Card 1 per kit
78-17985-XX Not applicable China Management Methods Hazardous Substances Content Table 1 per kit

Note

If you do not receive any part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml. If you purchased this product through a Cisco reseller, you may receive additional contents in your kit, such as documentation, hardware, and power cables.

Each new switch ships with country-specific power cords—the shipped cords depend on your specification when placing a Cisco MDS switch order. The available power cords for the Cisco MDS 9710 Director are as follows:

  • CAB-9K16A-AUS—power cord, 250-VAC 16-A, Src Plug A, Australia

  • CAB-9K16A-CH—power cord 250-VAC 16-A, Src Plug GB16C, China

  • CAB-9K16A-EU—power cord 250-VAC 16-A, Src Plug CEE, Europe

  • CAB-9K16A-INT—power cord 250-VAC 16-A, Src Pl, International

  • CAB-9K16A-ISR—power cord 250-VAC 16-A, Src Plug SI16, Israel

  • CAB-9K16A-SA—power cord 250-VAC 16-A, Src Plug EL, South Africa

  • CAB-9K16A-SW—power cord 250-VAC 16-A, Src Plug SEV 5, Switzerland

  • CAB-9K16A-US1—power cord 250-VAC 16-A, Src Plug NE, US and Japan

  • CAB-9K16A-US2—power cord 250-VAC 16-A, Src Plug NE, US and Japan

  • CAB-9K16A-KOR—power cord 250-VAC 16-A, Korea, Src Plug

  • CAB-9K20A-NA—power cord 125VAC 20A NEMA 5-20 Plug, North America/Japan

  • CAB-9K16A-ARG—power cord 250VAC 16A, Argentina, Src Plug IR2073-C19

  • CAB-9K16A-BRZ—power cord 250VAC 16A, Brazil, Src Plug EL224-C19

  • CAB-C19-CBN—cabinet jumper power cord, 250 VAC 16A, C20-C19 Connector

The available power cords for the Cisco MDS 9718 Director are as listed in the Cisco MDS 9718 Multilayer Director Datasheet.