System Requirements

This chapter lists the tested and supported hardware and software specifications for Cisco Data Center Network Management (DCNM) server and client architecture. The application is in English locales only. This chapter contains the following section:

System Requirements

This section describes the various system requirements for proper functioning of your Cisco DCNM Release 11.5(3).


Note

We recommend that you do not upgrade any underlying third-party software separately. All the necessary software components will be updated during the inline upgrade procedure. Upgrading the components outside of DCNM upgrade causes performance issues.


Note

If you are deploying Network Insights applications on the Cisco DCNM Compute cluster, refer to the app-specific release notes for additional CPU or memory requirements for Computes.

Java Requirements

The Cisco DCNM server is distributed with JDK 11.0.8 into the following directory: 

DCNM_root_directory/java/jdk11

Server Requirements

Cisco DCNM Release 11.5(3), supports the Cisco DCNM server on these 64-bit operating systems:

  • LAN Fabric Deployments:

    • Open Virtual Appliance (OVA) with an integrated CentOS Linux release 7.8

    • ISO Virtual Appliance (ISO) with an integrated CentOS Linux release 7.8

Supported Latency

The supported latency for Cisco DCNM LAN FabricMedia Controller deployment is defined below:

  • Between Native HA Primary and Secondary appliances, latency is 50ms.

  • Between DCNM Native HA Primary appliance to Switches, latency is 50ms.

  • Between DCNM Computes latency is 50ms.

Database Requirements

Cisco DCNM Release 11.5(3) supports the following databases:

  • PostgreSQL 10.15 - For OVA/ISO deployments


Note
The ISO and OVA installations support only the embedded PostgreSQL database.

Hypervisors

Cisco DCNM supports the ISO installation on a bare-metal server, no hypervisor, on the following server platforms:

Server

Product ID (PID)

Recommended minimum memory, drive capacity, and CPU count 1 2

Cisco UCS C240M4

UCSC-C240-M4S

32G / 500G 16 vCPUs

Cisco UCS C240M4

UCSC-C240-M4L

32G / 500G 16 vCPUs

Cisco UCS C240 M5S

UCSC-C240-M5SX

32G / 500G 16 vCPUs

Cisco UCS C220 M5L

UCSC-C220-M5L

32G / 500G 16 vCPUs

1 Install the Cisco DCNM Compute node with 16 vCPUs, 64G RAM, and 500GB hard disk.
2 If you are deploying Network Insights applications on the Cisco DCNM Compute cluster, refer to the app-specific Release Notes for additional CPU/memory requirements for the Computes.

Note

Cisco DCNM can work on an alternative computing hardware with appropriate specifications, despite Cisco is only testing on Cisco UCS.

Supported Hypervisors

You can use the Cisco DCNM Server on the following hypervisors:

Hypervisor supported

Data Center Manager server application

Supported deployments

ESXi 7.0

vCenter 7.0

All

ESXi 6.7 P01

vCenter 6.7 P01

All

ESXi 6.5

vCenter 6.5

All

ESXi 6.0

vCenter 6.0

All

RedHat 7.6 KVM with QEMU version 1.5.3

Virtual Machine Manager (comes with RHEL 7.6)

LAN Fabric

Hyper-V on Windows Server 2019

Hyper-V Manager (comes with Windows Server 2019)

LAN Fabric

This is supported with Native HA mode, and not in Cluster mode.

Server Resource (CPU/Memory) Requirements


Note

If you install Cisco DCNM on a virtual machine, you must reserve resources equal to the server resource requirements to ensure a baseline with the physical machines.

Table 1. System Requirements for Cisco DCNM LAN Fabric Deployment

Deployment Type

Small (Lab or POC)

Large (Production)

Compute for 81-350 switches scale (without Network Insights)

Compute for up to 80 switches (with Network Insights)

OVA/ISO

CPU: 8 vCPUs

RAM: 24 GB

DISK: 500 GB

CPU: 16 vCPUs

RAM: 32 GB

DISK: 500 GB

CPU: 16 vCPUs

RAM: 64 GB

DISK: 500 GB

CPU: 32 vCPUs

RAM: 64 GB

DISK: 500 GB

If the existing Elasticsearch database is more than 250GB, Cisco DCNM Server requires more than 500GB HDD space to complete reindexing.

Allocate sufficient disk space to the root partition to complete DCNM installation and for stable continuous operation of the DCNM applications. Refer to the applications’ User guides for disk space requirements. You can mount another disk where the /tmp directory can be mounted during the installation or upgrade. You can also add additional disk space and the disk file system using appmgr system scan-disks-and-extend-fs command.

Cisco DCNM LAN Fabric Deployment Without Network Insights (NI)


Note

Refer to Network Insights User guide for sizing information for Cisco DCNM LAN Deployment with Network Insights (NI).

To see the verified scale limits for Cisco DCNM 11.5(1) for managing LAN Fabric deployments, see Verified Scale Limits for Cisco DCNM.

Table 2. Upto 80 Switches
Node CPU Deployment Mode CPU Memory Storage Network
DCNM OVA/ISO 16 vCPUs 32G 500G HDD 3xNIC
Computes NA — — — —
Table 3. 81–350 Switches
Node CPU Deployment Mode CPU Memory Storage Network
DCNM OVA/ISO 16 vCPUs 32G 500G HDD 3xNIC
Computes OVA/ISO 16 vCPUs 64G 500G HDD 3xNIC

VMware Snapshot Support for Cisco DCNM

Snapshots capture the entire state of the virtual machine at the time you take the snapshot. You can take a snapshot when a virtual machine is powered on, powered off. The following table shows snapshot support for your deployment.

VMware vSphere Hypervisor (ESXi)

6.0

6.5

6.7

6.7 P01

7.0

VMware vCenter Server

6.0

6.5

6.7

6.7 P01

7.0

Note

You need VMware vCenter server to deploy Cisco DCNM OVA Installer. However, to install DCNM directly on VMware ESXi without vCenter, you can choose DCNM ISO deployment. Ensure that correct CPU, Memory, Disk, and NIC resources are allocated to that VM.

To take a snapshot on the VM, perform the following steps:

  1. Right-click the virtual machine the inventory and select Snapshots > Take Snapshot.

  2. In the Take Snapshot dialog box, enter a name and description for the snapshot.

  3. Click OK to save the snapshot.

The following snapshots are available for VMs.

  • When VM is powered off.

  • When VM is powered on, and active.


Note

Cisco DCNM supports snapshots when VM is either powered on or powered off. DCNM doesn’t support snapshots when the Virtual Machine memory option is selected.

Ensure that Snapshot the Virtual Machine's memory check box must not be selected, as shown in the following figure. However, it is grayed out when the VM is powered off.

You can restore VM to the state in a Snapshot.

Right-click on the Virtual Machine and select Manage Snapshot. Select the snapshot to restore, and click Done.

Supported Web Browsers

Cisco DCNM supports the following web browsers:

  • Google Chrome version: 86.0.4240.198

  • Mozilla Firefox version: 82.0.3 (64-bit)

  • Microsoft Edge version: 86.0.622.63

Other Supported Software

The following table lists the other software that is supported by Cisco DCNM Release 11.5(1).

Table 4. Other Supported Software

Component

Features

Security

  • ACS versions 4.0, 5.1, 5.5, and 5.8

  • ISE version 2.6

  • ISE version 3.0

  • Telnet Disabled: SSH Version 1, SSH Version 2, Global Enforce SNMP Privacy Encryption.

  • Web Client and Cisco DCNM-SAN Server Encryption: HTTPS with TLS 1, 1.1 and 1.2

  • TLS 1.3

OVA\ISO Installers

CentOS 7.8/Linux Kernel 3.10.x

Also, Cisco DCNM supports call-home events, fabric change events, and events that are forwarded by traps and email.