Cisco vWAAS in Cloud Computing Systems

This chapter describes the operation of Cisco vWAAS in the Microsoft Azure and OpenStack cloud computing systems.

This chapter contains the following sections:

About Cisco vWAAS in Cloud Computing Systems

Cisco vWAAS is a cloud-ready WAN optimization solution that is fully interoperable with Cisco WAAS appliances, and can be managed by a common Cisco WAAS Central Manager or Cisco vCM. The Cisco vWAAS cloud computing solution includes these features:

  • On-demand orchestration that responds to the creation or movement of application server VMs.

  • Minimal network configuration, including in a dynamic environment.

  • Designed for scalability, elasticity, and multitenancy support.

  • Designed for minimal network configuration in a dynamic environment.

Cisco vWAAS in Microsoft Azure

This section contains the following topics:

About Cisco vWAAS in Microsoft Azure

Microsoft Azure provisions VMs on the Microsoft Hyper-V hypervisor. Cisco vWAAS in Microsoft Azure is part of Cisco WAAS support for Microsoft Office 365, and is an end-to-end solution for enterprise branch offices.

  • Cisco vWAAS in Microsoft Azure is available for Cisco vWAAS in Cisco WAAS Version 6.2.1x and later.

  • Cisco vWAAS in Microsoft Azure is supported for Cisco vWAAS-200, vWAAS-750, vWAAS-1300, vWAAS-2500, vWAAS-6000, and vWAAS-12000.

  • Cisco vWAAS in Microsoft Azure is not supported for Cisco vWAAS-50000.

The following table shows the platforms supported for Cisco vWAAS in Microsoft Azure.

Table 1. Microsoft Azure VM Sizes for Cisco WAAS vWAAS Models

vWAAS Model

Maximum Connections

Data Disk

Minimum Azure VM Size

vWAAS-200

200

160 GB

D2_v2 (2 cores, 7GB)

vWAAS-750

750

250 GB

D2_v2 (2 cores, 7GB)

vWAAS-1300

1300

300 GB

D2_v2 (2 cores, 7GB)

vWAAS-2500

2500

400 GB

D3_v2 (4 cores, 14GB)

vWAAS-6000

6000

500 GB

D3_v2 (4 cores, 14GB)

vWAAS-12000

12000

750 GB

D3_v2 (4 cores, 14GB)

Operating Guidelines for Cisco vWAAS in Microsoft Azure

This section describes operating guidelines, interoperability guidelines, and operating limitations for Cisco vWAAS in Microsoft

Cisco vWAAS in Microsoft Azure interoperability:

Consider the following interoperability guidelines for Cisco vWAAS in Microsoft Azure:

  • Cisco vWAAS in Microsoft Azure is available for specified vWAAS models in Cisco WAAS Version 6.2.1 and later.

  • You can display and identify vWAAS in Azure device on the Cisco WAAS Central Manager or the Cisco WAAS CLI:

    • On the Cisco WAAS Central Manager, choose Manage Devices. The vWAAS in Azure device type is displayed as OE-VWAAS-AZURE.

    • On the Cisco WAAS CLI, run either the show version EXEC command or the show hardware EXEC command. Output for both commands includes the device ID, shown as OE-VWAAS-AZURE.

  • Cisco vWAAS in Microsoft Azure communicates with the Cisco WAAS Central Manager in the same way as physical appliances communicate with the Cisco WAAS Central Manager.

  • To display vWAAS in Azure devices, choose Home > Devices > All Devices. The Device Type column shows all WAAS and vWAAS devices. A vWAAS in Azure device is displayed as OE-VWAAS-AZURE.


    Note

    For Cisco vWAAS in Microsoft Azure, the supported traffic interception method is PBR; Cisco vWAAS in Microsoft Azure does not support WCCP or AppNav interception methods.

Operating limitations for Cisco vWAAS in Microsoft Azure:

Consider the following operating limitations for Cisco vWAAS in Microsoft Azure:

  • Cisco vWAAS auto registration is not supported, because Microsoft Azure uses DHCP to configure VMs with IP address and Azure fabric server IP address. There will be operational issues if you deploy a separate DHCP server for auto registration.

    Functionality similar to auto registration is available by providing the Cisco WAAS Central Manager IP address during Cisco vWAAS VM provisioning. The Cisco vWAAS VM will try to register with this Cisco WAAS Central Manager during provisioning.

  • Microsoft Azure does not support GRE, IPv6, or Jumbo Frames. Therefore Cisco vWAAS in Microsoft Azure does not support these features.


    Note

    For Cisco vWAAS in Microsoft Azure, the supported traffic interception method is PBR; Cisco vWAAS in Microsoft Azure does not support WCCP or AppNav interception methods.

  • Cisco WAAS and Cisco vWAAS with Akamai Connect are not supported for Cisco vWAAS in Microsoft Azure.

Upgrade and downgrade guidelines for Cisco vWAAS in Microsoft Azure:

Consider the following upgrade and downgrade guidelines for Cisco vWAAS in Microsoft Azure:

  • The procedure for upgrading or downgrading Cisco vWAAS in Microsoft Azure, for all Cisco vWAAS models except Cisco vWAAS-50000, is the same as that for other Cisco WAAS devices. For more information, see Cisco Wide Area Application Services Configuration Guide.

  • Downgrading a device or device group for Cisco vWAAS in Microsoft Azure to a version earlier than Cisco WAAS Version 6.2.1 is not supported.

Registering Cisco vWAAS in Microsoft Azure with the Cisco WAAS Central Manager

Consider the following guidelines for registering the Cisco vWAAS in Microsoft Azure with the Cisco WAAS Central Manager:

  • If you register the Cisco vWAAS in Microsoft Azure with the WAAS Central Manager using a private IP address, follow the Cisco vWAAS registration process described in Configuring Cisco vWAAS Settings of the chapter “Configuring Cisco vWAAS and Viewing vWAAS Components.

  • If you register the Cisco vWAAS in Microsoft Azure with the Cisco WAAS Central Manager using a public IP address, you must specify the public address of the Cisco vWAAS in the Cisco WAAS Central Manager Device Activation window (choose Devices > device-name > Activation).

    After you register the Cisco vWAAS in Microsoft Azure device with the Cisco WAAS Central Manager, you must configure the public IP address of the Cisco WAAS Central Manager. The Cisco vWAAS in Microsoft Azure device can contact the Cisco WAAS Central Manager only by using the public IP address of the registration. To set the public IP address of the WAAS Central Manager:

    1. From the Cisco WAAS Central Manager, choose Home > Devices > Primary-CM-Device > Configure > Network > NatSettings.

    2. In the NAT IP field, enter the public IP address of the Cisco WAAS Central Manager.

Deploying Cisco vWAAS in Microsoft Azure

This section has the following topics:

Deployment Options for Cisco vWAAS in Microsoft Azure

There are two major deployment options for Cisco vWAAS in Microsoft Azure:

  • A SaaS application, such as an enterprise application, where you control the hosting of the application.

    In this type of deployment, both the application server and Cisco vWAAS can be put in the Microsoft Azure cloud just as in a private cloud. The Cisco vWAAS is very close to the server, and tied to the server movement. In such a scenario, the traffic flow is very similar to that in a normal enterprise data center deployment.

  • A SaaS application, such as Microsoft Office 365, where you do not control the hosting of the application.

    In this type of deployment, you do not have control over the application in the cloud; you control only the Cisco vWAAS. In this case, traffic from the Cisco Cloud Services Router (Cisco CSR) in the branch is tunneled to the Cisco CSR in Microsoft Azure, which is then redirected to the Cisco vWAAS. A Destination Network Address Translation (DNAT) is performed to get the traffic back to the Cisco CSR in the Microsoft Azure cloud from the SaaS application. For more information on Microsoft Office 365 with Cisco WAAS, see Accelerate Microsoft Office 365 Shared Deployments with Cisco WAAS WAN Optimization.

Provisioning the vWAAS VM in Microsoft Azure

Before you begin

To deploy Cisco vWAAS in Microsoft Azure, you need a Microsoft Azure Pay-As-You-Go subscription. Details about the subscription procedure and billing information are available on the Microsoft Azure website.

Procedure
Step 1

Login to the Microsoft Azure portal.
Step 2

Choose New > Compute > Virtual Machine > From Gallery.

The Create a Virtual Machine/Choose an Image window is displayed.

Step 3

At the Create a Virtual Machine/Choose an Image > My Images window, select the vWAAS Azure image for your system.

The Create a Virtual Machine/Virtual Machine Configuration window is displayed.

  1. In the Virtual Machine Name field, enter the name of the VM you want to create. Use only letters and numbers, up to a maximum of 15 characters.

  2. At the Virtual Machine Tier pane, select Standard.

  3. From the Size drop-down list, select the Azure VM size for your system. The following table shows the minimum Azure VM size for each Cisco vWAAS model available for provisioning in the Virtual Machine Tier pane.

    Table 2. Microsoft Azure VM Sizes for Cisco WAAS vWAAS Models

    vWAAS Model

    Maximum Connections

    Data Disk

    Minimum Azure VM Size

    vWAAS-200

    200

    160 GB

    D2_v2 (2 cores, 7GB)

    vWAAS-750

    750

    250 GB

    D2_v2 (2 cores, 7GB)

    vWAAS-1300

    1300

    300 GB

    D2_v2 (2 cores, 7GB)

    vWAAS-2500

    2500

    400 GB

    D3_v2 (4 cores, 14GB)
    Note 

    Use the Microsoft Azure Virutal Machine Tier pane to select an Azure VM for the Cisco vWAAS models shown in the above table. For vWAAS-6000 and vWAAS-12000, you must use the template to specify the Azure VM. For more information, see the table in About Cisco vWAAS in Miscrosoft Azure.

  4. In the New User Name field, enter your user name.

  5. In the New Password field, enter your password.

  6. In the Confirm field, re-enter your password.

  7. (Optional) If your system uses SSH key-based authentication:

    • Check the Upload compatible SSH key for authentication checkbox.

    • From the Certificate field, browse for the certificate file for your system.

  8. (Optional) If your system requires a password, check the Provide a password checkbox.

  9. Click the right arrow at the lower right of the window to proceed to the next window.

    The next Create a Virtual Machine/Virtual Machine Configuration window is displayed.

Step 4

At the next Create a Virtual Machine/Virtual Machine Configuration window:

  1. From the Cloud Service drop-down list, choose Create a Cloud Service.

  2. In the Cloud Service DNS Name field, enter the name of the VM that you created in Step 3a.

    When Azure VMs are being named, the DNS name has cloudapp.net automatically appended to it.

  3. From the Region/Affinity Group/Virtual Network drop-down list, choose a location that is in close proximity to the resources you want to optimize, such as East U.S. or North Europe.

    The Region/Affinity Group/Virtual Network setting determines the location of the VM within the Azure cloud data centers.

  4. From the Storage Account drop-down list, select Use an automatically generated storage account.

  5. From the Availability Set drop-down list, choose (None).

  6. Click the right arrow at the lower right of the window to proceed to the next window.

    The Virtual Machines/Virtual Machine Instances window is displayed.

    By default, the Install the VM Agent check box is checked.

Step 5

At the Virtual Machines/Virtual Machine Instances window:

  1. In the Endpoints section:

    • Add an endpoint for SSH (port 22).

    • Add an endpoint for HTTPS (port 443).

  2. Click the check mark at the lower right corner of the window to proceed for provisioning Cisco vWAAS.

    The Virtual Machines/Virtual Machine Instances window now shows the newly-created VM with an initial status of Starting (Provisioning).

    The process takes a few minutes before the VM status is displayed as Running.

  3. Select the Cisco vWAAS VM.

  4. Attach the data disks. For data disk sizes for Azure VMs, see the table in About Cisco vWAAS in Miscrosoft Azure..

  5. Stop and then restart the VM, so that it picks up the attached disks.

    Your VM is ready to be deployed with an end-to-end setup.

Deploying Cisco vWAAS VM and Data Disk with the VHD Template

Procedure
Step 1

Using AzCopy, copy vwaas.vhd to the storage account.

The AzCopy command parameters are:

  • Source: The local folder address on the Windows device where the VHD file is stored.

  • Dest: The location of the container on the Azure cloud storage account.

  • Destkey: The Azure cloud storage account key.

Step 2

Use the VHD template to deploy the Cisco vWAAS VM.

The Cisco vWAAS VM is deployed with the data disk.
Step 3

Log in with your username and password.
Step 4

(Optional) To verify deployment details such as CMS registration and the Cisco WAAS Central Manager address, see Verifying the Cisco vWAAS in Microsoft Azure Deployment.

Deploying vWAAS VM with Template and Custom VHD from the Microsoft ARM Portal

Before you begin

Verify that the Cisco vWAAS VM is provisioned in Microsoft Azure, including the creation of a storage account and a VM location specified in Microsoft Azure. For more information, see Provisioning the Cisco vWAAS VM in Microsoft Azure.

Procedure
Step 1

Using Azcopy, copy vwaas.vhd to the storage account.

Step 2

Use the template to deploy the vWAAS VM.
Step 3

At the Microsoft ARM portal, choose New > Template Deployment > Edit Template.

Step 4

Copy the template.
Step 5

Paste the template in the Templates window.

Step 6

For the parameters, enter the values for your system, such as resource group and resource group location, and whether or not to deploy the vWAAS VM in a new or existing virtual network.

Step 7

Accept the Terms and Conditions.

Step 8

Click Create.

The Cisco vWAAS VM is deployed.
Step 9

Log in with your username and password.
Step 10

(Optional) To verify deployment details such as CMS registration and Cisco WAAS Central Manager address, see Verifying the Cisco vWAAS in Microsoft Azure Deployment.

Deploying Cisco vWAAS VM Using Microsoft Windows Powershell

Before you begin

Verify that the Cisco vWAAS VM is provisioned in Microsoft Azure, including the creation of a storage account and a VM location specified in Microsoft Azure. For more information, see Provisioning the Cisco vWAAS VM in Microsoft Azure.

Procedure
Step 1

Deploy Cisco vWAAS on Microsoft Hyper-V. For information on this deployment procedure, see the chapter "Cisco vWAAS on Microsoft Hyper-V."

Step 2

To set the necessary Azure parameters, run the azure_predeploy.sh script in Hyper-V.

Step 3

Export the flash VHD from the Microsoft Hyper-V disk location to the storage account in Microsoft Azure, using AzCopy.
Step 4

Run the Microsoft Windows Powershell commands to specify the following parameters:

  • To specify the deployment name, run the deployName command.

  • To specify the resource group, run the RGName command.

  • To specify the location, run the locName command.

  • To specifiy the template file, run the templateURL command.

Step 5

To to create the resource group, run the New-AzureRmResourceGroup -Name $RGName -Location $locName Powershell command.

Step 6

To deploy Cisco vWAAS in Microsoft Azure, run the New-AzureRmResourceGroupDeployment Powershell cmdlet. To complete the deployment, specify values for the following parameters:

  • userImageStorageAccountName

  • userImageStoragContainerName

  • userImageVhdName

  • osType

  • vmName

  • adminUserName

  • adminPassword
Step 7

After you enter these parameters, Cisco vWAAS in Microsoft Azure is deployed. The system displays provisioning information including deployment name, provisioning state, date/time, and mode.

Step 8

Log in with your username and password.
Step 9

(Optional) To verify deployment details such as CMS registration and Cisco WAAS Central Manager address, see .Verifying the Cisco vWAAS in Microsoft Azure Deployment

Verifying the Cisco vWAAS in Microsoft Azure Deployment

The following table provides a checklist for verifying the Cisco vWAAS VM deployment in Microsoft Azure.

Table 3. Checklist for Verifying the Cisco vWAAS in Azure Deployment

Task

Description

Viewing vWAAS in Azure vWAAS devices

  • From the Cisco WAAS Central Manager, choose Manage Devices. The vWAAS in Azure device type is displayed as OE-VWAAS-AZURE.

  • From the Cisco WAAS CLI, run either the show version EXEC command or the show hardware EXEC command. Output for both commands will include device ID, displayed as OE-VWAAS-AZURE.

Viewing Boot Information and Diagnostics

On the Microsoft Azure portal, choose Virtual Machines > VM > Settings > Boot Diagnostics.

Verifying CMS Registration

  • If the Centralized Management System (CMS) is enabled, run the show cms device status name command to display status for the specified device or device group.

  • After you have registered the vWAAS in Azure device to the Cisco WAAS Central Manager, you must configure the public IP address of the Central Manager. The vWAAS in Azure device can contact the Cisco WAAS Central Manager only by using the public IP address of the registration. To set the public IP address of the Cisco WAAS Central Manager:

    • In the Cisco WAAS Central Manager, choose Home > Devices > Primary-CM-Device > Configure > Network > NatSettings.

    • In the NAT IP field, enter the public IP address of the Cisco WAAS Central Manager.

Verifying Cisco WAAS Central Manager Address

To dipslay inforamtion about all Cisco WAAS devices, run the show running-config command.


Note

Whenever ARP caches are cleared or the Cisco vWAAS is rebooted, packets may not be forwarded to the next hop in Microsoft Azure cloud. To ensure that packets are successfully forwarded, use the ping EXEC command to update the ARP cache table.

Upgrade and Downgrade Guidelines for Cisco vWAAS in Microsoft Azure

Consider the following upgrade and downgrade guidelines for Cisco vWAAS in Microsoft Azure:

  • The procedure for upgrading or downgrading Cisco vWAAS in Microsoft Azure, for all Cisco vWAAS models except Cisco vWAAS-50000, is the same as that for other Cisco WAAS device.

  • Downgrading a device or device group for Cisco vWAAS in Microsoft Azure to a version earlier than Cisco WAAS Version 6.2.1 is not supported.

Cisco vWAAS in OpenStack

This section contains the following topics:

Operating Guidelines for Cisco vWAAS in Openstack

Consider the following operating guidelines for Cisco vWAAS in OpenStack:

  • Cisco vWAAS in OpenStack is supported for Cisco vWAAS in WAAS Version 6.4.1b and later.

  • Cisco vWAAS in OpenStack is supported for all Cisco vWAAS and Cisco vCM models that are supported on RHEL KVM on CentOS.

  • On the Cisco WAAS Central Manager, Cisco vWAAS devices in OpenStack are displayed as OE-VWAAS-OPENSTACK.

  • All Cisco vWAAS models for Cisco vWAAS in OpenStack are deployed with a single, unified OVA. The following are examples of the unified OVA and NPE OVA package filenames for Cisco vWAAS in OpenStack:

    • OVA: Cisco-KVM-vWAAS-Unified-6.4.5-b-69.tar

    • NPE OVA: Cisco-KVM-vWAAS-Unified-6.4.5-b-69-npe.tar

  • When you deploy the OpenStack host, it uses the default vWAAS disk size. Modify the disk size, as needed, for your configuration requirements.

  • For OpenStack deployment, the Generic Receive Offload (GRO) setting on the host NIC card must be enabled.

Deploying Cisco vWAAS in OpenStack

This section contains the following topics:

Guidelines for Deploying Cisco vWAAS in OpenStack

Consider the following guidelines to deploy Cisco vWAAS in OpenStack:

  • Cisco vWAAS in OpenStack is deployed for vWAAS on KVM. For more information on Cisco vWAAS on KVM, see the chapter "Cisco vWAAS on RHEL KVM, KVM on CentOS, and KVM in SUSE Linux."

    For Cisco vWAAS on KVM in Cisco WAAS Version 6.4.x and later, Cisco provides a single, unified OVA or NPE OVA package for each hypervisor type, which can be used with all Cisco vWAAS models for that hypervisor. Here are some examples of the unified OVA and NPE OVA package filenames for vWAAS on KVM:

    • OVA: Cisco-KVM-vWAAS-Unified-6.4.5-b-69.tar

    • NPE OVA: Cisco-KVM-vWAAS-Unified-6.4.5-b-69-npe.tar

    For more information about this unified OVA package, see Unified OVA Package for Cisco vWAAS on KVM in WAAS Version 6.4.1 and Later in the chapter "Cisco vWAAS on RHEL KVM, KVM on CentOS, and KVM in SUSE Linux."

  • After Cisco vWAAS in OpenStack is operational on a device, you can use the Cisco WAAS Central Manager or the Cisco WAAS CLI to display the OpenStack device.

    • The Cisco WAAS Central Manager displays the following information for the device:

      The OpenStack device is displayed in the Devices > All Devices listing under Device Type as OE-VWAAS-OPENSTACK.

      The OpenStack device is displayed in the Devices > device-name > Dashboard as OE-VWAAS-OPENSTACK.

    • Run the show hardware command to display the device, as well as other system hardware status information such as startup date and time, the run time since startup, microprocessor type and speed, and a list of disk drives.

Procedure for Deploying Cisco vWAAS in OpenStack

Procedure
Step 1

Copy the unified OVA to a directory on the host machine.

Step 2

Untar the OVA using the following command:

tar -xvf Cisco-KVM-vWAAS-Unified-6.4.5-b-69.tar.gz
Step 3

Create the image.

  1. Click the OpenStack Admin tab and choose the Compute > Images window.

    Figure 1. OpenStack Compute > Images Page

  2. From the Images table, choose the image for your system.

  3. To create the image, click Create Image.

Step 4

Create the bootable volume.

  1. Click the OpenStack Admin tab and choose Compute > Create Volume.

    Figure 2. OpenStack Create Volume Dialog Box: Creating Bootable Volume

  2. In the Volume Name field, enter the name of the Cisco vWAAS model and disk, for example, vWAAS_200_disk0.

  3. From the Volume Source drop-down list, choose Image.

  4. From the Use image as a source drop-down list, choose the build number for your system.

  5. From the Type drop-down list, choose iscsi.

  6. From the Size (GiB) drop-down list, choose the size for this volume, for example, 4.

  7. From the Availability drop-down list, choose nova.

  8. Click Create Volume.

Step 5

Create nonbootable volumes.

  1. Click the OpenStack Admin tab and choose Compute > Create Volume.

    Figure 3. OpenStack Create Volume Dialog Box: Creating Nonbootable Volumes

  2. In the Volume Name field, enter the name of the Cisco vWAAS model and disk, for example, vWAAS_200_disk1.

  3. From the Volume Source drop-down list, choose No source, empty volume.

  4. From the Type drop-down list, choose iscsi.

  5. From the Size (GiB) drop-down list, choose the size for this volume, for example, 10.

  6. From the Availability drop-down list, choose nova.

  7. Click Create Volume.

Step 6

In the OpenStack Compute > Volumes window, create all the volumes related to your deployed model.

Figure 4. Openstack Compute > Volumes Page: Create all Volumes for Deployed Model

  1. In the OpenStack Compute > Volumes page, create an instance with a bootable volume.

    Figure 5. OpenStack Compute > Volumes Page: Create Bootable Volume

  2. Launch the instance.

  3. Click the OpenStack Admin tab and choose Compute > Instances > Launch Instance.

    Figure 6. OpenStack Launch Instance > Details Page

  4. In the Instance Name field, enter the name of the Cisco vWAAS model, for example, vWAAS-200.

  5. From the Availability drop-down list, choose nova.

  6. From the Count drop-down list, choose 1.

  7. Click Launch Instance.

Step 7

Specify the flavor suitable for the selected Cisco vWAAS model. As noted on the OpenStack page, flavors manage the sizing for the compute, memory, and storage capacity of the instance.

Click the OpenStack Admin tab and choose Compute > Instances > Launch Instance > Flavor.

Figure 7. OpenStack Launch Instance > Flavor Page
Step 8

Select the networks for the vWAAS.

Click the OpenStack Admin tab and choose Compute > Instances > Launch Instance > Networks.

Figure 8. OpenStack Launch Instance > Networks Page
Step 9

Select the configuration drive to send model parameters.

  1. Click the OpenStack Admin tab and choose Compute > Instances > Launch Instance > Configuration.

    Figure 9. OpenStack Launch Instance > Configuration Page

  2. From the Disk Partition drop-down list, choose Automatic.

  3. Check the Configuration Drive check box.

  4. Click Launch Instance.

Step 10

Provide model and connection information to deploy vWAAS in OpenStack metadata.

  1. Click the OpenStack Admin tab and choose Compute > Instances > Launch Instance > Metadata.

    Figure 10. OpenStack Launch Instance > Metadata Page

  2. Specify resource metadata by selecting and moving items from the Available Metadata column into the Existing Metadata column.

Step 11

Attach disks to the deployed instance.

  1. Click the OpenStack Admin tab and choose Compute > Volumes.

    Figure 11. OpenStack Compute > Volumes Page: Attach disks to deployed instance

  2. From the Edit Volume drop-down list, choose Manage Attachments.

    The Manage Volume Attachments dialog box appears.

    Figure 12. OpenStack Manage Volume Attachments Dialog Box

  3. From the Select an instance drop-down list, choose the instance to attach to the disk.

  4. Click Attach Volume.

Step 12

After attaching the disks, the Compute > Volumes window displays the attached disks.

Figure 13. OpenStack Compute > Volumes Page: List of attached disks
Step 13

Reboot the system (hard reboot).

  1. After the system is rebooted, choose Compute > Instances.

  2. From the Create Snapshot drop-down list, choose Hard Reboot Instance.

  3. The Compute > Instances window displays the attached disks.

    Figure 14. OpenStack Compute > Instances Page: Attached disks listing
Step 14

From the Instances > Instance Console page, connect to the console to work on Cisco vWAAS.

Figure 15. OpenStack Instances > Instance Console Page

Upgrade and Downgrade Guidelines for Cisco vWAAS in OpenStack

Consider the following upgrade and downgrade guidelines for Cisco vWAAS in OpenStack:

  • The procedure for upgrading or downgrading vWAAS in OpenStack is the same as for any other WAAS device.

  • Downgrading a device or device group for vWAAS in OpenStack to a Cisco WAAS version earlier than Version 6.4.1b is not supported.